Simple gearbox made with 3d printer and few hardware parts. Gear-ratio is 1/16. www.thingiverse... www.instructab... Music : www.incompetech.com
Пікірлер: 98
@Lagggerengineering7 жыл бұрын
FINALLY somebody who shows some post processing of a 3D print! People buy a 3D printer, expecting it to run on pixie dust or something and the wonder why their prints look bad.
@EinsteinarabableАй бұрын
i wasted too much time looking for a simple gearbox design and i found it here many thanks
@waledali4347 жыл бұрын
i like watching someone who got all the right tools for the right job and uses them so pro looking and awesome output you
@code-grammardude59747 жыл бұрын
I just bought some geared motors I should have watched this, before this video comes out I was looking all over the place for a compact 3d model of a gear box thank you btw I don't think the music was annoying :D
@aplicarciencias Жыл бұрын
That is great work you did. Congrats!
@nico82737 жыл бұрын
Amazing vid ! Enjoyed the quality of the video and the patience in the making of the gearbox !. Tho I wont trash talk about the background music, you should consider using other music such as a soothing one, and less instagram-like. But, beside that, keep it up with the amazing builds
@mlgisnotdead77527 жыл бұрын
I think all the dislikes are just from the backgraund music...
@bryzabone7 жыл бұрын
MlgIsNotDead yes. Yes they are
@preddy097 жыл бұрын
Or maybe because 3d printed gears are incredibly noisy and the play is unacceptable for many applications
@zainnoman31455 жыл бұрын
Or the crocs at 6:04
@mylifeonthepeninsula95214 жыл бұрын
lmao true
@sergioricardopereira2 жыл бұрын
Just what I need for a project... thank you
@an_R_key7 жыл бұрын
That is amazing work you did there. Well done!
@Whatsthegeek7 жыл бұрын
Amazing work and nicely filmed !
@rricd4 жыл бұрын
Looks like is the same principle of the servo motor. Nice project.
@sanjayprasad24967 жыл бұрын
This is beautiful!!! really liked it looked really proffesional
@tonyhill83002 жыл бұрын
Isn't it best to print gears on a raft? Reduces clean up
@MrCrankyface7 жыл бұрын
Really neat video, subbed. :)
@Fluli7 жыл бұрын
A nice improved printer, nice idea and nice quality. But the music is a bit annoying. All in all I liked your video and I subscribed for more. At wich printspeed do you print?
@cwgreenley7 жыл бұрын
I rather enjoyed the music
@fortzero15527 жыл бұрын
I use quite slow speeds 20-40 ms depending which layer is printing. If I use speeds over 50ms my extruder starts skipping. Next upgrade will be a new hotend and a bowden extruder.
@Whatsthegeek7 жыл бұрын
It would make a nice servo if you added a potentiomenter
@fortzero15527 жыл бұрын
Servo was my inspiration here :).
@ParsMaker3 жыл бұрын
nice work
@marceloenriquechirinosmedi6002 Жыл бұрын
Please make a 1000kg/cm gearbox with this DC motor 775
@artomatica7 жыл бұрын
Very good! How strong is it? What is a maximum torque on the shaft it can survive?
@fortzero15527 жыл бұрын
I have no idea how much torque this can take. But I think if you are using small motors with this, motor will stall before the shaft broke down.
@UzunKamis3 жыл бұрын
Great videoz thank you. Can you please define the sizes of the nails and screws? Thanks one again.
@rosstrue13 жыл бұрын
Thanks for sharing
@mike309saa7 жыл бұрын
good vid and good print quality. I have the exact same printer, just wondering if you could tell me what steps per minute the extruder is set at in marlin and also what extrusion flow rate do you have set in your slicer? Am new to 3D printing so just want some starting point.
@fortzero15527 жыл бұрын
My Esteps are set to 98 or 0.98 (Factory default). Flow rate is set 100% = factory settings. When I build this printer I had lot of problems with under extrusion but the reason was slipping extruder gear that pulls filament.
@mike309saa7 жыл бұрын
How did you sort the slipping extruder gear? Unless yours is different, mine doesn't have an adjuster screw to adjust the tension. Though not had any gear slipping issues yet.
@ailtonalcantarasilva37912 жыл бұрын
Very Nice! Thank you!
@beauz445 жыл бұрын
Could those be used for a mini electricity generator? Awesome video and design thank you!
@fortzero15525 жыл бұрын
Yes. Replace that wheel with a wind turbine blades example and you have a wind generator.
@Pandadancypant7 жыл бұрын
I'm kind surprised ya didn't fill the box with grease
@Tusooong7 жыл бұрын
Awesome dude. Keep it up. Dayuuuummm!
@axeljlundberg7 жыл бұрын
What did you use to prep the PLA for paint? And is it the same for ABS?
@fortzero15527 жыл бұрын
1.Clean all dirt and oil from the surface. 2.Add Primer and top coat. I'm using Alkyd and acrylic based spray paints for PLA. No problems so far. Both of those types of paints seems to have some acetone within so using them with ABS plastics is not guaranteed. (Never tested ABS filaments) Check link for more info about spray paints. www.maston.fi/en/front-page
@churrumais63 жыл бұрын
Hey bro do you know where I can find the stl for a gearbox with two axes but for the 755 motor so that it looked like the typical yellow motors but much more powerful, im sub I have looked for something similar in many places but did not find I needed something with power and with 300 rmp more or less not the typical slow box
@Duci19896 жыл бұрын
Think this will work to convert a hand cranked standing desk to an automatic one?
@naboulsikhalid77636 жыл бұрын
woow, genius. love the video, ideas, so neat. thank u for sharing. i will support u
@BlueCheese136 жыл бұрын
wow amazing
@isaiasmarquesferreiraferreira5 жыл бұрын
Hi, i've liked that project, right now i remixing with Thingiverse
@Vid304You7 жыл бұрын
Hello. I just discovered your channel by watching the PCB UV unit and it's great. Keep up the good work and consider advertising it some way :)
@transformers12632 жыл бұрын
Do you have links to the tools you use for the post processing ?
@sebbe95m Жыл бұрын
Why do you need that many gears ? Trying to understand why not only a smal gear to a large gear :)
@frantellewater30641a Жыл бұрын
Its significantly smaller if you use compound gearing instead of 1.
@ELValenin4 жыл бұрын
Try printing the gears in nylon
@JC_Young7 жыл бұрын
Found a super easy fix for those who don't like the music! Its a super secret setting on KZbin called MUTE. Personally it didn't bother me one bit.
@instantjustice1643 жыл бұрын
Awesome!!!
@karamjivani36695 жыл бұрын
Hello. I was wondering if I could use this by adding a screwdriver head to the part that spins on the motor? Would this add torque to the head? Thank you.
@escain5 жыл бұрын
It definitively add torque to the head, but it IMO would not work as a decent screwdriver for two reasons: The power of the motor is not enough and the design is not strong enough for the screws: with a stronger motor, plastic parts would just break.
@apolinargaytan49385 жыл бұрын
Donde se concigen esos motores.
@marcteigh86336 жыл бұрын
Excellent use of a 3D printer :) Just one query, if you don't like "Baby Blue" coloured plastic, what got you to buy that shade! Anyway, awesome project and provokes thought, thanks.
@ELValenin4 жыл бұрын
I like it
@utkuduman7231 Жыл бұрын
any way to reduce sound?
@cybergnetwork58810 ай бұрын
Turn the volume down, isn't easy enough?
@santiagoacosta17514 жыл бұрын
Buenarrrdo esto papá
@vborgnet4 жыл бұрын
555 motor ?
@kuyzcharly9387 жыл бұрын
can i buy one of those
@JaviepalFordring16 жыл бұрын
I try to make this garbox for my school proyect, but gears get stuck and doesn't turn,, i put the washers and the grease, but the gears can't turn for some reason, there are plenty of room in the case too.
@fortzero15526 жыл бұрын
Javierpal Fordring Have you calibrated your printer properly ? Try to scale down your gears by 0,5% and print again...
@JaviepalFordring16 жыл бұрын
Fortzero ok
@Boritzzz7 жыл бұрын
Would you recommend the geeetech? and is it a pro B? I'm considering buying the Geeetech Prusa I3 Pro B myself :D Cheers
@fortzero15527 жыл бұрын
If you like tune and fix things then geeetech might be a good choice. Print quality without mods is poorly, mainly because of "Z wobbling". But considering the price (under 200€) I think this is good starting point in world of 3d printing.
@P0llut1on7 жыл бұрын
what kind of cable stripper do you use to uncover the wire?
amazing man. hey can you make a 3d printed high torque servo.
@jktvteam61595 жыл бұрын
can you give it to me in money
@knowall57924 жыл бұрын
I wonder whether it was possible to use bush, or even small ball bearings on the shafts. This is not to criticize your work, because I am nowhere near your skill level. Keep making.
@fortzero15524 жыл бұрын
Yes, bearing and a steel shaft would be good upgrade for this one. Little bit tweaking with the original model and done ;)
@user-iu3gu7tl3j4 жыл бұрын
👍
@raulleyba37847 жыл бұрын
Very good editing and 3d print processing. Make more vids and I and many others will subscribe! I'm sure of it. :)
@eXe097 жыл бұрын
What the fuck was that music? Are you some kickstarter startup from 2014?!
@fortzero15527 жыл бұрын
Just press mute and that's it :).
@eXe097 жыл бұрын
Mute does not solve the bad choice of music, mate
@mathis52257 жыл бұрын
i was thinking thesame, jesus christ
@OU81TWO7 жыл бұрын
It's kitten video music.
@TonyRios6 жыл бұрын
LMFAO
@mr.indiahaker41856 жыл бұрын
WOSAME DOD
@JosephAMuniz6 жыл бұрын
I absolutely HATE the music!
@SantaDragon7 жыл бұрын
It doesnt seem that you are a engineer. Use worm gear, this use same space and should trasport more than that weight.
@calebsherman8867 жыл бұрын
Santa Dragon So he's not an engineer because he doesn't use worm gears.... seems legit.