3D Printed RC Boat with JET PROPULSION

[@RcLifeOn]

I love the jetboat and all...but that raft is ⭐⭐⭐⭐⭐!

[@asgkllngfxxhkkvxdhkkbhjllnvcg]

RCLifeOn Love your videos, superb editing and great content! I bought the tarantula for your review. Now is all pimped.

[@wolful_hu6901]

Hey umm RCLifeOn i know the trend is over or a dead meme welp for the next project can you make a fidget spinner that fly's in the sky by a transmitter you can do this project if you want and love you content and bye >w

[@lucakubitza1534]

RCLifeOn What graphics card and processor do you have?

[@rst6590]

Nice please UPLOAD ALL PARTS U USED TO BUILD THIS ON THINGIVERSE😊😊😊😊😊😉😉😉😉😉

[@deepalinagda9523]

RCLifeOn can. You upload your videos quiet fast as we all are interested in the content so please don’t make us desperate

[@thebeststooge]

A friendly suggestion on the coupler and that is do not print it like a tower but instead on its side. All of my couplers failed at a seam line due to twisting forces but if the layers are perpendicular to the twisting force it can't twist off. I would give that a try. I hope that helps.

[@ARepublicIfYouCanKeepIt]

Simon, your videography (recording and post-processing) keeps improving. From taking the servo mount off the F360 screen, to your perspective face shots, to the drone footage with helicopter sound effect, the whole video was fantastic. Oh, and the RC boat design, 3D print, integration, build and test were incredible, as well! Have an awesome day!

[@h0melesskid733]

you notice all that yet you couldn't tell the video is sped up...

[@memtenn60]

John Coloe ?

[@HackGyver]

*9:02** That transition ❤*

[@MakersMuse]

Holy crap did that work so much better than I could have imagined. Historically I have had horrible success with RC Boats (they like to sink) but this makes me want to try it again so badly. Maybe a mini one next :P!

[@jrgv5754]

wait why hasn't anyone replied to this comment....i mean like hmmm ill have to see when u started ur channel but I thinker you've been here longer than just 2 years huh welp hi ig huge fan

[@suaydadaud1133]

@@jrgv5754 okay now i reply secon anyway here i reply see

[@Ovesundbergh]

Hehe

[@andregowans4910]

0:38 look out the window... i know these things take time, but damn

[@solidusseal]

You can print it in parts( need software to cut) so you can have a few hour chunks .. but then you need to glue them . whatever foats ………. your boat ;)

[@adesh8439]

The way he combines electronics and memes together is just awesome

[@normanmendonca2834]

My friend, you have made an epic production. This KZbin video should be up for an award, the presentation,music and overall quality is wonderful. I enjoyed it very much. Your 3d printed boat is fantastic. I love all the 3d printed parts.

[@annpenfield1]

Amazing I love your vids, the GoPro transition was awesome. 👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼

[@hilltaco7330]

It's at 9:02 isn't it

[@UnboxingSve]

Your videos are amazing :) this moment 9:02

[@karifshaikh9734]

Holo Fake

[@edstar83]

Karif Shaikh = Holo Jealous

[@gufulafa2158]

Holo Fake o que hace

[@Carlos-ce2gn]

That design is sooooooo CLEAN!! Great job

[@mccc4559]

Congratulations on attaining 100,000 subscribers!!! You're there my little brother. I am so proud of you. This project, your passion, the wisdom, and everything else happen to be beyond incredible!!!

[@Bare_Essence]

Ok ... you did not give yourself enough credit on the raft! The boat was awesome and worked well. The raft / video platform / boat rescue / ... worked very well! You were on the edge and did not seem to list much if at all. The anchor rope was cool too! Great job.

[@rustyshackleford6259]

That first raft shot was something to be written about for future generations to know.

[@knowledgebyte]

A really simple yet effective coupler is nothing more than a piece of fuel tubing. I bought a brass coupling, but then had to make up a TPU bush to allow the allen screws to nip the shaft without rocking off the shaft - the shaft is polished stainless-steel. Tubing is best from what I can tell.

[@mumumumah]

Nothing to add other than that was pretty sweet.

[@pbnj6399]

That’s one hell of a boat you got there

[@BitJul_1]

The homemade RC jetboat and raft are both super cool. And yes, try printing the shaft connector in nylon.

[@orlovsskibet]

You always make me smile. You are such a positive person !

[@abdulr5320]

I liked the video just for the cat ..... regardless of your awesome work, i was watching on the tv screen , went into the history on my phone just to comment to show some support to the cat and maybe your work too

[@jakew3]

Hey here's another comment. So amazing what you can accomplish with 3d printer and lots of ingenuity, plus perseverance

[@blickberg8404]

Pretty cool trick pulling out the part from the screen.

[@DargoDog]

Aside from it just being badass, I like this project because all of the work is not done by the 3D printer. For some reason I like that there is still fabrication and assembly to do.

[@stevepenner3419]

Very cool. Beautiful lake! Would like to see the boat again with upgraded coupler and maybe a better prop.

[@saloniwakode928]

After getting ur notification I was so happy that I was about to cry man keep it going luv ur videos

[@eddegaming1067]

Ankit Wakode same

[@jmtx.]

Totally awesome build along with a super scenic testing ground!

[@mullervolker9814]

This is a spitting version of a boat.

[@AJWyman1]

loving the vids bud! Jet boats are Awesome! I run one in the small creek behind my house. So much fun in the rapids and rough water! You might think about putting something over the water inlet to keep debris out of your prop.

[@keitharnold7016]

I have a little experience in RC Boats. I REALLY hope that you do the 'upgrade' and give us a video of that. A metal prop and shaft coupler would let you go FULL THROTTLE. However, this is impressive, just the way you did it.

[@thibaultlamtran9312]

Oh boy! This video is amazing I can really share this video with my friends! I also made the boat and it totally rips!

[@NeoIsrafil]

I love that you released the STL files for us to make our own. Pretty epic boat man! Hopefully when everything settles down I can get back to printing RC too.

[@ajblair8421]

That’s the coolest thing you have done yet

[@QuebecoisSti]

Awesome boat! To be racing ready you should get a metal propeller, metal coupler, put bearing to hold the shaft, use a metal (or only plate in between your plastic one) motor support (may melt otherwise). Some watercooled for motor and ESC would make it holding the power overtime

[@olegunter7885]

Perhaps you can make a net in Front of the water inlet so nothing can touch the Motor.... and Please build another racing drone

[@RealSB]

Great build dude! Awesome jet-boat!

[@bethechange4934]

What a GREAT project! It performed so well and you knew you might have problems with the coupler before you even tried it. Great job!

[@patprop74]

Very cool, and that fact, you posted on thingiverse is even better! A++ video as always! Cheers.

[@joshuahalla.k.a.controlla6333]

Great video. ☺️

[@johnboleyjr.1698]

Awesome build. The first thought I have for the coupler between the shafts is some kind of aquarium tubing, the air line tubing or something like it. This would not only connect the two shafts together, but would provide a bit of shock absorption, and vibration dampening for the motor.

[@paulmason6847]

Really nice job there, you can buy a universal joint coupling with changeable fitting on both ends fairly cheaply, this will also help with reducing friction from miss-alignment between motor and shaft that you get from a solid coupling, i am amazed the 3d printed prop held together, well done.

[@pbitsurf]

You are probably one of my favorite KZbinrs. You always inspire me to work hard on my own personal projects. Thank you for making such good videos.

[@bigpaco996]

FINALLY you posted a video! If been waiting 2+ weeks for a new video from you.. you're inspiring man

[@Lizlodude]

Transitions on point

[@bilalbawab5568]

you did the hole stuff alone, that's amazing!

[@lukasvercaempst44]

Hands down the best youtube editing I have ever seen and your doing this all by your own

[@Clem449]

9:03 smoothest transition ever

[@jefkell]

What a great build

[@ColeBender]

Technically it's just a normal boat with a propeller partially inside and not a real jet boat. I think if you get an aluminum coupling and propeller you will not be bottlenecked by the 3D printing. Because of the fact that it's not a traditional jet boat I think you will also find the propeller pushing air instead of water when you go higher speeds. Absolutely loved the video as always.

[@tvnsi8556]

Genius model and job + presentation is amazing

[@Peter195267]

Hi Simon great video, loved the angle of your last few moments. Keep these great videos comming.

[@greazemungkie]

Great video and boat, awesome lake!!!

[@dvbulatov]

Место для ловли щуки просто волшебное.

[@zincyellowmach1523]

Awesome videos! Back in the day we used a small box full of grease right before the shaft exits the hull, the tube leads to the box of grease and the share rides through it to the motor. Water can not pass the grease. Thought that might help in the future, thanks for the good videos!

[@jonathanaguilar3053]

But seriously you're awesome dude...

[@CPU-01]

Yo I live in San Francisco and you just inspired me to make an RC boat with long range FPV - love it.

[@hashidhorre1736]

Dude you got attention,. I haven't seen in a long time 3d printer videos.. thanks Mon.

[@MrKipKonijn]

This is such a coincidence! I'm currently working too on a 3d printed jetboat⭐️ super awesome!!

[@xprojetos]

Very good friend

[@BartJBols]

THAT RAFT HAS ITS OWN SELFIESTICK

[@diamantinoribeiro1912]

Show!! Very cool, the place is also very beautiful.👍

[@DIYBuilder]

Awesome Jetboat bro :)

[@Mike_Faraday]

Great work, great video...so much fun looking at it, at you...

[@billysmether6237]

Well done!!!!!!!!! Excellent design!

[@kelurc6635]

Great build

[@nofaa1977]

I do not know English ... but now I know English well from your amazing works ... Thank you

[@matschbirne5363]

Nofaa Nofaa i wouldnt say u are good in english

[@nofaa1977]

@@matschbirne5363 He is the translator, my dear

[@nofaa1977]

@@matschbirne5363 I just want to thank you for your wonderful effort

[@matthewdebona]

You should 3D print a catermaran and add 2 motors on each side! Try to make it as fast as you can.

[@user-dz2jv4in5z]

More motors doesn't mean more speed.

[@BrianPhillipsRC]

@ 4:14 - LOL! Favorite part of the video!!!

[@zetekfr]

Nice job Simon, as always. And watching your vids makes me love your country.

[@gustavocavicchia3099]

Well done!! Congratulations! I guess you like boats so much. Why don't you think about make a rocket next time!? With a real propulsion system... have you ever imagined take some pictures of stratosphere?!?! So cool!!!

[@ColtonCampbell]

9:04 = greatest transition i've ever seen

[@EpicProvider]

nice go pro transition in the water

[@gustavoguedes5454]

Dude, your country is beautiful.

[@GiffysChannel]

that was pretty cool. i like your ingenuity

[@JurneMolina]

Dude I love your RC vids

[@gth042]

Obviously your cinematic skeeelz are waaay up there (I'd like to see you do a full movie one day). What's your favorite effect/transition/trick you like to do? Folks seem to like the 9:04 Go"Pro", but the 5:14 was slick as well as the subtle 0:34. Thanks for your work and... have an awesome day. Nice raft thingie, btw -- seems really stable!

[@swipenderswiper9575]

Thanks for sharing the files!

[@terrencepaul2156]

Seriously one of the coolest projects I’ve ever seen 👏🏻👏🏻👏🏻

[@DieCastoms]

I want the same boat, but small enough to print in one piece on an Ender 3. Yes, it will need smaller electronics, I know that. Also, try using sealed bearings at the point where the propshaft enters the hull, at the point where it exists the hull, and at the point in the black jet housing. Pack between the two hull bearings with something like petroleum jelly ("Vaseline") to keep water seeping though the hull there. I also suggest even a really low "windshield" immediately in front (and maybe down the sides) of the slide in cover. Just a little ramp-shaped 'lip' on the red plastic part.

[@jakew3]

Your videos are so cool. Perfect mix of badass-ery, humor, and cinematography. You should have millions+ subscribers!

[@stugotswins]

wow great video you might add a screen to keep things from getting sucked into the intake, also make the drive nozzle a conical shape to increase the pressure of the water as it exits the nozzle

[@the_golden_ingot]

I love Jetboats and RcLifeon!!!❤❤❤

[@Duke-px2kk]

Thanks. You might try with a silicone tube as a connection to the shaft. Glue and strap it might work. Your raft is way nicer than mine I had when I was a kid. 👍

[@JohnOCFII]

That was great fun! Love to see the combination of 3D printing and RC!

[@haipengli4769]

Nice work and clear explanation.

[@blaxxteam]

hi, you really improve your boat since the black one. very nice. just use a metal coupler and its good.

[@geoffb7900]

Enjoyed watching.

[@jackjohnson169]

Your videos are so high quality. That part where you grab the price out of the compute was seamless. Do more things like that. Google job man and keep up the good work.

[@bigendertroll]

because of you i have got the cr-10 :)

[@H3zzard]

Amazing! Still astonished that you film all this yourself... usually at the same time as you're doing something awesome. Mad props (or impellors) on the successful boat project(s).

[@Mani-uc5cc]

Amazing Video as always! Love your "vibes"!

[@lazyj4732]

Great build and video. For a smaller printer, you could print the bow area as a hollow sealed unit with locating pins and matching indentations in the aft section. That way both halves should line up perfectly and give flotation without any weakness.

[@diegogutierrez317]

A really cool video. Congrats!

[@JulioJairdeAlba]

Amazing! FPV system there will be funny

[@mrpete1972]

You've got to make that brass coupling as I want to see it move at full power, as always great vid clip..

[@thtluka4600]

you have a nice cat and this boat is awesome and i wish to make one for myself.

[@BN-no8zi]

Just subscribed because of that go pro transition 9:02

[@TGiFoosday]

Great video and build project. I love and scratch build my own RC Jet boats too. Just a couple of notes for you though, 1: On water jet drives it is an impeller, not a propeller. 2: On Jet boats the steering is provided by the "Steering Bucket", it is not a "Rudder", a rudder is a fin that Redirects water being pushed by a 'propeller' or flowing past it. Both result in a torque force on the transom that changes where the nose/bow is pointing. There is great satisfaction in building one yourself and having it actually work yes? Keep up the good work.

[@elrod0011]

Dude!!! Great video, as always. The boat is awesome. I can't wait to see a video doing a speed test on it. As soon as you fix the coupler, that is... and the raft. It is GLORIOUS!

[@Adventurekm]

Awesome boat and great video. You can get a metal boat coupling universal joint and metal prop that boat would be sick!

[@onlyhook1597]

My fav KZbinR ... Sooo satisfying Videos man