3D Printed RC JET Boat with JET Drive - Assembly

[@Mroswaldo16]

This is one of the cleanest 3D printed boat ive seen.

[@jtronicsTV]

Thank you! 👍 It was a long way of testing different designs and many of 3d printed prototypes.

[@kevinsinderbury1751]

Hly Hl

[@zenokoo777]

Same

[@afrog2666]

@@kevinsinderbury1751 oooo kay

[@মোঃসেলিম-হ৩ঠ]

lik

[@anthonysimpson5801]

Absolutely superb, beautiful design, well engineered construction with the quality in all the right places and a perfect compact internal set up. Have you ever thought of marketing them as a complete kit? I am sure there would be enough of a demand for them to make it profitable. A set of printed instructions and a link to this video would make for a comprehensive kit.

[@ewgenilukashin6868]

This is a fantastic small boat project. I am particularly pleased with the new revision of cooling and the possibility of increasing the engine. I have not seen such a well-thought-out model. I am glad that I became the owner of such a boat thanks to your development.

[@jtronicsTV]

hi, thanks for your words. I started the model 3 years ago ... and with the new version 003 it's much better than in beginning. Maybe you could post some videos and pictures of your printed boat. It would be really great. 👍👍👍

[@ewgenilukashin6868]

@@jtronicsTV I am a model airplane builder. Although as a child he performed at the Russian championship in the class FSR-3.5. But I can't resist when I see a constructively high-quality model. I want it to immediately have such a model. I am very glad that I came across your model. I enjoy her

[@Vok250]

Did you seal the plastic so it doesn't leak?

[@jotham123]

For those who may be wondering Accu = battery Great little boat looks awesome. I really like your design. I've got a printed boat too. Lots of fun

[@vishalgaurav4411]

You finally assembled ?

[@onlyme3543]

Clever af bro! Well done!

[@jtronicsTV]

Thank you 👍😀

[@osik6746]

Awesome build and work

[@jtronicsTV]

Thank you. 👍

[@JamesBrown-zf3ky]

Really nice. Only issue that I could see. You did not screw the servo arm to the servo. Surely that could be a problem if it falls off. Wet feet.

[@jtronicsTV]

Oh yes that's right 🤔 So please don't forget the screw to fix the servo arm!!! Thank's to James.

[@afrog2666]

Very cool :) Personally I`d add a simple grill to the water inlet to avoid debris getting into the propeller, but otherwise this looks really nice, complete build tutorial in 16 minutes, must be some kind of record ;)

[@jtronicsTV]

Thank's. I tried to add a grill but there is too less space and i think it's to difficult to build/print.

[@ECHOAircraft]

Wow! Such a lot of stuff in such a tiny space! I love this design

[@jtronicsTV]

😁 yeah, you understand my design too. A small, dynamic "boat hull" filled with a motor, some electronics and batteries for energy storage. 👍👍🚀 small, so you could take it everywhere you go 😎

[@knowledgebyte]

Thanks a million for those additional Cura settings. I can see how you managed to get such fine prints now.

[@makewithmegma]

Amazing work👍

[@jtronicsTV]

Thank you😎👍

[@joewoodchuck3824]

One suggestion; put a waterproof switch on it so you dont need to take the cover off with every use. Another possibility is to use an exterior magnet with an interior reed switch. I didnt see how the driveshaft was sealed against water where it exits the hull. Nice build!

[@jtronicsTV]

Hi, the scene with the lube is at 7:17minute kzbin.info/www/bejne/Zn3Ih5KDr7t0p7s The idea with the reed switch is good. Do you have a link to a good reed switch and a picture?

[@MR2GR]

I got the basic concept of most of what happened, but without the wiring and other details was a little lost. It was still very entertaining. I'm pretty excited to see the run of this thing.

[@jtronicsTV]

Hi, there are several videos on my youtube channel. You will find them in this playlist kzbin.info/aero/PLhygdw4V4Xy6iXpoaEf6BMdz3SXnMxZ6b All the other details you will find here cults3d.com/en/3d-model/game/rc-mini-jet-boat

[@ArduinoKing]

What a absolutely great design! Been wanting to do somthing similar, small 2205 motor on a tiny boat. Was going to design it myself but dont have time. This looks fantastic, great work.

[@jtronicsTV]

Thank you very much. Yes, designing and testing of such a boat takes much time. I had to print about 8 prototypes to get such a good JetBoat.

[@indranshsharma7322]

No words to express my feelings it is very very awesome and the most important thing is, it's perfect. I love it Plz make a 3D printed high speed RC car . ❤️👍👍👍👍👍👍👍👍👍❤️

[@jtronicsTV]

Winter is coming, so I need new projects. I will think about it.😉

[@ratimus2000]

Very nice job mate, and a great build video too!

[@jtronicsTV]

Thank you 👍😀

[@savneetsinghrairai6823]

Double check the servo shaft screw u just missed it...Well cleanest 3d speed boat..👍👍👍

[@jtronicsTV]

:D yes you should. Thank you 👍

[@Blue.4D2]

Beautiful design, masterful execution! 😊👍

[@jtronicsTV]

Thank you. It was a long time to get this result 😅

[@Calthecool]

Really well done.

[@jtronicsTV]

Thank you 👍

[@djmjr77]

Pretty freakin sweet bro !!! Very well thought out!!

[@jochenweisel8612]

alter Verwalter, das Teil rockt. Ich MUSS das auch haben......

[@jtronicsTV]

:D ja das stimmt. Hab vor paar Tagen die neuste Version 003 hochgeladen, da haben sich noch ein paar kleine Features verbessert. Viel Spass beim Bauen. Hier der Link zu den Modellen... www.jtronics.de/link-page/

[@bMoth941]

Would have been nice to see it in action. However, looks like a nice build 👍

[@MeAgainstMusic]

Uff, endlich fast fertig mit zusammenbauen. Version 2 scheint ein engeres Loch hinten für die Lenkung zu haben, kann das sein? Da scheint kein 3mm Rohr sondern nur mehr 2mm zu passen, kann das sein?

[@jtronicsTV]

Ja das stimmt, die erste lösung, mit den 2 rohren war zu umständlich.

[@MeAgainstMusic]

@@jtronicsTV super, dann hab ich da richtig hingeschaut. War beim drucken da etwas skeptisch, aber denke die Lösung ist deutlich sinnvoller. Gibt es ansonsten Unterschiede, die beim Bau zu beachten sind zwischen V1 und V2?

[@jtronicsTV]

@@MeAgainstMusic nein sonst gibt es keine Abweichungen in der Anleitung. Es hat sich nur die Form von Rumpf und Deckel leicht geändert, daher die neue Versionsnummer.

[@3DPrintTechDesign]

Very nice boat and design! =)

[@jtronicsTV]

Thank you 👍

[@jacobdavidcunningham1440]

damn nice design

[@woodthomas4155]

Absolutely , i love it . good job !

[@jtronicsTV]

Thank you. 😲👍

[@renaultwhyte8732]

wow..I jus luv the finishing... can u make one and send it to me..

[@jtronicsTV]

Sry, you have to build it by yourself.

[@kruemsch]

Grüße, das Boot ist komplett gedruckt und zusammengebaut und das Ergebnis ist extrem gut geworden. Der Betrieb mit 2 3000 mAh Akkus ist mir etwas zu schwer ist der Rumpf ohne 18650 Halterung für normale lipos gedacht? Mfg

[@jtronicsTV]

Du kannst das boot statt mit 18650 auch mit den kleineren 18350 lipo akkus betreiben. Aber du kannst aich ganz andere akkus verwenden, daher gibt es auch die STL "without batterymount". Hier hat das schon jemand mit 2S 430mah lipos gemacht... instagram.com/p/CAtNP7TjKFV/?igshid=xyndle7agf8j

[@pitfireproducts]

I subscribed because of this! Awesome work!!!

[@jtronicsTV]

Thank you 👍

[@avianaviator1570]

Brilliant work! As well as video making. You've earned my subscription :)

[@jtronicsTV]

Thank you 😎 Video making is much harder than designing such a boat ;-)

[@wrsdz]

Hi ,what a great project . Have you coated the boat some how against water ? If yes , what would you recommend ? thanks in advance.

[@jtronicsTV]

If your 3d printer print the hull good, it should be waterproof. But, if you want to be safe, you could still paint it with a thin layer of acrylic car clear coat. I tried both variants and it works very well.

[@andreasheckendorn2003]

Applaus bin begeistert 👍

[@jtronicsTV]

Das freut mich 😃

[@eliasfauser2764]

cool und sehr akurat+ BW gibt ein fetten like:)

[@jtronicsTV]

Vielen Dank 😃

[@R3IMYSS]

1:10 - My girlfriend loved this part. :)

[@jtronicsTV]

OMG ;-)

[@ChemistryAmsterdam]

Wauw no commercials!!! +1 👍 Rrspeckt 🙏

[@Tuffaha]

I love the design. How did you come up with it? Pictures of speed boats?

[@jtronicsTV]

I get the inspiration from many boat and jet drive pictures. Than i had to do a lot of testing. It was a long way...

[@guitar98xD]

Hallo! Habe mir Dein RC Boot Design vor ein paar Tagen gekauft! Sehr schönes Design! Warum verwendest du PLA anstelle von bspw. ABS?

[@jtronicsTV]

Danke, es hat auch viele Iterationen gedauert, dass es so aussieht. Aber es geht auch noch immer weiter... PLA ist fest genug und für viele viel einfacher zudrucken. Bei den dünnen Wandungen, haben die meisten eh schon genug Probleme mit ihrem Drucker, dessen Einstellungen und der Druck Qualität.

[@kevintieman3616]

Do you have any advice to press out the motor shaft? I don't have access to a screw press, and a vice won't work as it doesn't have holes. A link to a suitable screw press would be good too, I haven't been able to source one online!

[@jtronicsTV]

Hi... i made a new video. Hope it's a solution for you. kzbin.info/www/bejne/oaCygn2eptRoqJY

[@kevintieman3616]

@@jtronicsTV I had some quad motor lying around, and was able to use it. Thanks!

[@jtronicsTV]

@@kevintieman3616 thats great!

[@kevintieman3616]

@@jtronicsTV Only thing is, quad motors usually need M3 screws which became a problem (holes and space on the motor mount are designed for M2). I ended up glueing the motor on with thick CA glue. However the is build done and works really great! Waiting or the twin 300 ;-)

[@Gone_4Evr]

I love this

[@jtronicsTV]

hey, thanks :-)

[@petervieweg3959]

Super erklärt und eine schöne Konstruktion! Welches Fett ist dazu am besten geeignet?

[@jtronicsTV]

Vielen Dank. Als Fett verwende ich Vaseline, das gibt es in jeder Drogerie. Wie weit ist dein Boot?

[@petervieweg3959]

Ich habe erst einmal die Teile gedruckt. Das Material ist bestellt. Den Elektronikhalter bekomme ich nicht gut gedruckt. Wenn ich mit Support drucke, bekomme ich den nicht mehr heil ab und ohne Support sieht das Teil ... naja ... besch... aus. 🤔 Aber das Teil sitzt ja von außen unsichtbar im Boot. Nochmal 👍 für das Boot! Ich habe vor, danach Dein Boot mit den 2 Antrieben nachzubauen.

[@MrJdsenior]

If you cut the ends of that sealing chord at a relatively high angle, say 60 degrees or more. and make it so it fits with just a TINIEST BIT of compression, with the angle in the horizontal plane, the top will squish the ends together to form a watertight seal. The other option is to glue the ends with a glue that dries as pliable as the gasket material, or make it such that a standard sized o-ring will fit (you can get then to pretty long lengths still at small longitudinal diameters). Right now it is pouring in my front yard and practically dry in the back...weird. If you designed that boat yourself, very nice, well thought out.

[@ke4450]

Hello jtronics, The esc, motor and battery are not problem hot? Thanks & very nice design!

[@jtronicsTV]

No, the temperature of all components is fine. 👍

[@happygokillmore]

awesome little boat! one thing though, O-rings work better with a little grease on them so it might be wise to put a little on the O-ring after its been glued!

[@jtronicsTV]

yes you could grease the O-ring, but its not needed. Last weekend we had a boat underwater (depth of 2m) for about 15min and there was no water inside.

[@bluemaz6]

I must be missing something, how do you prevent the water from entering the boat where the steering and drive shaft?

[@jtronicsTV]

the holes are filled with grease kzbin.info/www/bejne/Zn3Ih5KDr7t0p7s

[@hi7_limited534]

Nice work dude

[@jtronicsTV]

Thank You! 👍

[@BurgerurgerFPV]

does the haul need supports? i keep getting warnings that there floating pieces but your directions say it doesn't need them.

[@MUSTYMAYO10]

could you put links to the electronics because i dont know where to start and this boat would be amazing to have

[@jps99]

Where do you get the 2 x 30mm motor shafts? Are they grooved for the c-clip?

[@jtronicsTV]

They are not grooved. It's not necessary. All links to the parts are on cults3d

[@gaborwraight8426]

Loving this project and already have all the 3d printed parts ready. While I'm waiting for the other parts from China could you please let me know what type of lube is needed?

[@jtronicsTV]

hope that you will get all parts fast, to have a lot of fun this summer.

[@gaborwraight8426]

@@jtronicsTV Thank you very much! Some parts have already arrived so it's only a matter of time. Expecting everything by the end of next week. Could you please let me know what kind of lube is needed? Dankeschön!

[@jtronicsTV]

Hi, I take "vaseline" it's the main component of many cremes or you will get it in supermarkets.

[@gaborwraight8426]

Perfect, thank you for the reply. I ordered some marine lube but will then also go for vaseline.

[@nihathuseynli8696]

Hello , did you buy this project?

[@matthewdimond6174]

I have been following these build. It is amazing. Following all the links provided to purchase parts. Some of them are no longer avail. Can you help me understand the exact parts needed and exactly where I can get them.

[@kasheemdonalds1762]

That's a good job dude

[@jtronicsTV]

Thank you 👍

[@kasheemdonalds1762]

@@jtronicsTV your welcome

[@tylerufen]

Amazing build quality, thank you ☺️

[@jtronicsTV]

Thank you 👍

[@PascalDupre-y9l]

I have a YKS X1806 2300KV motor that fits perfectly inside the boat, can I use BLHeLi 20A ESC listed in your boat parts ? or do I need to buy a different ESC ?

[@BurgerurgerFPV]

Were u able to get the motor shaft in there? I have a flashhobby 1806 and i can’t get the motor apart so i can put the longer motor shaft in

[@Thefreakyfreek]

dude this is what im was looking fkr for so long

[@jtronicsTV]

Thank you, hope you will have fun with it 👍 :-)

[@Thefreakyfreek]

@@jtronicsTV i think i will

[@lyraheartstrings8280]

With 3D prints immersed in water I've had the problem that the water just seeps trough the layers after some time. How did you go about this problem, did you coat the boat with something in the end?

[@jtronicsTV]

If the 3d print of the hull is good, it should be waterproof. But, if you want to be safe, you could still paint it with a very thin layer of car clear coat. I tried both variants and it works very well.

[@andrewb7817]

Nice. How far can sweam from coast meters?

[@rc-fannl7364]

Nice project, well documented.

[@jtronicsTV]

Thank's! 👍The documentation took me a lot of time. Hope I didn't forget something. 🤔

[@KMorozou]

Great video ! Very inspiring! 😊

[@jtronicsTV]

Thank you. 😲👍

[@chilliconcare]

Nice Video man thx! Now i only must fix the problem with setting the Channels in my taranis qx7... I dont have a clue how too setup the Signal for each gimbal stick (Channel) with drones on betaflight its much easier... Is It possible you post a link or a little answer for help me with this läßt struggles. ✌️ Thx man cheers

[@jtronicsTV]

sry i don't have a link to a tutorial. i tried it by myself.

[@ArduinoKing]

Just set it up as a standard RC plane. Then when it comes to testing, you can use the output tab to limit the throw of the servo, so it's not straining. Also remember to calibrate your ESC.

[@chilliconcare]

@@ArduinoKing thx man i already Set It up last weekend and bash around the lakes now 😉👍

[@davidb5168]

fantastique!!!!!!

[@jtronicsTV]

Thanks you! 😀👍

[@jonathanmayfield9218]

I was looking at purchasing these STL files how long is the print time on this

[@jtronicsTV]

hi, it's about 19h. But its a really nice model

[@chrisbarnes8887]

Very neat project. How long does it take to print all the parts. A buddy will print it for me but can’t tell how long it takes to print without purchasing the files. Just trying to get an idea before ordering other parts for it.

[@jtronicsTV]

Printing of all parts will take about 18 hours.

[@kruemsch]

Servus, habe das zweite Boot gedruckt optisch ist alles super dennoch bekomme ich den Rumpf nicht 100% Wasserdicht, auch nicht mit verringerter Linienbreite. Ich bekomme aber auch nur 2 statt 3 Wandlinen hin, hast du einen Tipp? Mfg

[@jtronicsTV]

hallo, tut mir leid, dass ich erst jetzt antworte, aber zur Sicherheit empfehle ich immer die Boote mit einer dünnen schicht Acryl Klarlack zu überziehen. Das wirkt Wunder. Hast du Bilder von deinem Boot?

[@exobyte317x7]

how did you decide on motor esc and prop size?

[@jtronicsTV]

A lot of testing...😉

[@Andreas992-ST]

Einfach TOP weiter so ;-)

[@jtronicsTV]

Danke! 😀

[@spudfan1]

Haha i made one, printed in noname black ABS, almost all mechanics and electronics from scrap I had laying around, only got a 2mm coupling and nut inserts from the partlist. great job jtronics, ​

[@jtronicsTV]

👍👍 cool, do you have some pictures of your boat?

[@ka4172]

Hallo ,wäre diese Boot geeignet um kleine Bachläufe gegen den Strom zu befahren (genug speed im Jet) ? Außerdem hab ich fest gestellt das bei meinem der Bug immer in die Strömungswellen eintaucht und das Heck zu tief liegt und schon bei 5cm Wassertiefe auf dem Grund aufsetzt. (Horizon Jet Jam) Könnte man bei ihrem Boot ein Gitter über dem Wassereintritt anbringen um zu verhindern das es kleine Steinchen ansaugt? Reicht dann noch die Wassermenge für einen kräftigen Jet Strahl ? Vielen Dank für ihre Zeit.

[@eziosoft]

Great design !

[@jtronicsTV]

Thank you 😎

[@starkautomotiverestoration347]

Awsome Can I ask where I can get the design from I'd like to build one

[@jtronicsTV]

Thanks. 🙂 Hi, you could download the stl files here cults3d.com/en/3d-model/game/rc-mini-jet-boat Please send pictures of your boat. 👍

[@co069]

it's beautiful.

[@jtronicsTV]

Thank you 🤩😉

[@kdkdx7770]

15:52 why is their allready a waterdrop

[@jtronicsTV]

You are great 👍👍👍 the last minutes of my video were very bad, so I had to do it again. But before I made the testing video... so there was a small waterdrop.

[@kdkdx7770]

@@jtronicsTV 😂still awsome

[@Friendroid]

You should sell little packs with the extra hardware needed through your website. Easy to buy the stl and electronics but no one needs 100pcs eating/brass tube/screw/inserts etc.

[@ELValenin]

Why did you need to replace the motor shaft?

[@jtronicsTV]

The shafts of all small brushless motors are to short. To connect a clutch you need a longer shaft.

[@ELValenin]

@@jtronicsTV ah okay that makes sense thank you

[@FullThrottleRC]

That came out really good! I'm still working on my design which is a little bigger. Thanks for the video!

[@jtronicsTV]

Thank you. 😲👍 Please tell me if your design is ready.

[@FullThrottleRC]

@@jtronicsTV it's ready. Need to get some time to make the video.

[@JerseyStyle7]

Amazing 👍, nvr knew u could do that, i just bought a Thrasher V3 Jet Boat

[@jtronicsTV]

hi, you could build this boat too. You will find all info here: cults3d.com/en/3d-model/game/rc-mini-jet-boat

[@justwhatever]

Hello sir, I purchased your model few weeks back and I have trouble changing the motor axis. I destroyed one trying... And it is not quite like your instructions (though I bought the right model). Is there any alternative references that could do the trick without this step ? Like a long axis engine?

[@carxdrifting3339]

Good afternoon.The motor should rotate clockwise or counterclockwise. Thanks

[@jtronicsTV]

hi, it should rotate counterclockwise.

[@on2vhf83]

Beautifull, good job

[@jtronicsTV]

Thank you 👍

[@adrianwrobel2304]

Kann ich in das 300mm Boot 4*18650 er packen oder explodiert dann die Schraube ? :-)

[@jtronicsTV]

Ja das geht auch. Ich habe auch schon 4x 18350 verbaut, 4x18650 solkte auch passen. Von der drehzahl her bekommt man aber nur 3s ins wasser übertragen. Danach wird es nicht mehr wirklich schneller.

[@GumbaMS]

Impressive

[@nicolasmeyer9313]

Great project! Do you know a cheaper transmitter model who should work with your project?

[@jtronicsTV]

You could take every transmitter. You receiver should be small enough to fit into the boat.

[@nicolasmeyer9313]

thank's for your answer

[@ArduinoKing]

@@nicolasmeyer9313 Flysky i6. or flysky GT2 for a boat style tx.

[@sebgln]

All are print with PLA ? I want to build this but I don't know if I can find all of parts things in France... It's very typical :/

[@rcintro1489]

Good work!

[@jtronicsTV]

Thank you 👍

[@MeAgainstMusic]

Is there any partslist you have for that, what screws, which beerings etc.?

[@jtronicsTV]

Yes, you will find all informations at the following site cults3d.com/en/3d-model/game/rc-mini-jet-boat

[@Brndon-pi2mo]

you need to show more info for the battery set up for those people that dont know how to use 18650 s

[@jtronicsTV]

Hi, there is an extra tutorial for the electronic stuff... kzbin.info/www/bejne/hp7dgKOfp7yXrcU

[@slaading]

So great! I would love a list of the other material you used. Amazon links would be great as I am not a lot into modeling. You could also sell kits with all the material besides the printed parts... I would buy it IMMEDIATELY :)

[@jtronicsTV]

😉👍 you will find alle informations about the projects here www.jtronics.de/link-page/

[@dannygarden464]

No talking, only close ups , not a fan BUT kinda instructive, so 👍 for efforts ;)

[@jtronicsTV]

Thank you 👍

[@DelawareRCMan]

New sub, this boat is pretty cool! I might have to try an rc boat, I currently run trucks on my channel!

[@woodthomas4155]

We are considering supporting some guys with our rc boat accessaires , like shaft ,prop and so on . from our AMAZON store .

[@DelawareRCMan]

@@woodthomas4155 thats pretty awesome!

[@woodthomas4155]

@@DelawareRCMan I emailed you ,Do you got it ?

[@DelawareRCMan]

@@woodthomas4155 yes I just replied to it

[@zenithdreademarcus1612]

@@woodthomas4155 can you email me please?

[@Daguschi]

Super Video was für ein regler wurde da verbaut?

[@jtronicsTV]

hallo, alle Infos und Links zum Projekt findest du hier cults3d.com/en/3d-model/game/rc-mini-jet-boat

[@basic_settings]

Awesome build! Which receiver and servo are you using?

[@jtronicsTV]

Thank you here is a list of all parts cults3d.com/en/3d-model/game/rc-mini-jet-boat

[@knowledgebyte]

Great little boat and very nice print. Well done. Could you assemble a kit please (BOM - Bill of materials) for all the parts? And could you provide that kit? Or if not, can you provide a Amazon source (I'm in the UK, so a more local supply chain would be best) If you would like we can start a community of builders. print out a few and sell them on your behalf.? We pay you a percentage of the builds. So your designs will get out there via a network of builders. What do you think?

[@GreySamson]

This is beautiful!

[@jtronicsTV]

Thank's 👍

[@lchunleo]

Where is the battery located and what type of battery is used ? Thanks

[@jtronicsTV]

Batterys are in the BOAT. 2 cells of the type 18650.

[@mohamedrachidi1028]

hello sir what is the model of the reciever that you used

[@jtronicsTV]

😉👍 you will find alle informations about the projects here www.jtronics.de/link-page/

[@jofffrancisco6464]

what specific glue to use for shaft bushing?

[@jtronicsTV]

It's fixed with uhu plastic or with pattex kraftkleber. But also the clear coat is fixing the bushing.

[@MeAgainstMusic]

Ich habe vor einem Jahr oder so mal das ursprüngliche Boot anfangen wollen zu bauen. Nachdem ich auf Facebook gesehen habe, dass du ein neues Boot (mit 2 Motoren) released hast, wollte ich das bauen - hab dann aber festgestellt: Moment mal, ich hab ja schon mal so ein Boot gekauft. Ich bin derzeit auf der Suche nach passenden Motoren. Hast du noch ein paar Alternativen zu dem DYS BE1806? Der ist ausverkauft und ich konnte von der Bauart her irgendwie nichts ähnliches finden :(

[@jtronicsTV]

Das freut mich, dass du so ein Boot bauen möchtest. Die Motoren vom Typ 1806 sind immernoch erhältlich, habe grad erst wieder 4 Stück bekommen. Die Links zu den Motoren findest du auf der Projektseite. Diese werden regelmäßig von mir überprüft. Weiterhin gibt es ein video zum Umbau von alternativen Motoren (Links zu den motoren sind auch auf der Projektseite). Siehe hier... kzbin.info/www/bejne/f2GxgXeIgsyai6c Seit kurzem kannst du auch mit Hilfe eines Adapters DC Brushed Motoren vom Typ 180 verbauen. Siehe Updates auf der Projektseite cults3d.com/en/3d-model/game/rc-mini-jet-boat Also sollte es an Motoren nicht mangeln. Hoffe du findest für doch eine Lösung. Viele Grüße

[@MeAgainstMusic]

@@jtronicsTV Hi, danke für die Antwort. Ich habe mir nun einen Motor vom Typ 180 bestellt. Mich verwirrt die Konstruktion des Adapters ehrlich gesagt etwas, ich habe das Gefühl, dass da irgendetwas nicht passen wird - habe mir den Adapter ausgedruckt aber verstehe noch nicht so ganz, wie der benutzt werden soll. Hat ja 4 Löcher - ich hab aber das Gefühl, dass die 2 (die an den geraden Seiten) irgendwie ... wo sollen die hin? Die an den runden Ecken sind (soweit für mich erkennbar) ja die Löcher, in welche die Schrauben vom Motor kommen. Oder interpretiere ich da irgendetwas falsch?

[@jtronicsTV]

Hallo. Als erstes 2 Muttern der größe M2 in den Adapter pressen. Danach den Motor in den Adapter pressen. Danach wird der Adapter über die eingepressten Muttern mit dem Boot verschraubt. Die anderen Löcher sind optional.

[@arjovenzia]

Neat design, definitely on my list of things to print. I love how much of this thing is battery ;-) Thanks, good luck in your future builds.

[@jtronicsTV]

😁 yeah you understand my design. Small, dynamic "boat hull" filled with a motor, some electronics and batteries for energy storage. 👍👍🚀

[@chandankindo6741]

Lllllllllllllllollllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllll8p0

[@mdaaftab5091]

@@jtronicsTV to be

[@mdaaftab5091]

@@chandankindo6741 .k..m

[@mdaaftab5091]

Sea,qq,qaaaaaaaqaaaaa

[@leftcoast9261]

Where did the inserts come from? Those looked really useful.

[@jtronicsTV]

you will find a list with link to all parts here: cults3d.com/en/3d-model/game/rc-mini-jet-boat

[@christianfilloux]

What specs motor? I want to buy this and 3d print but want to make sure i have the right motor first. i have some 1806 and 2204

[@jtronicsTV]

Here gs the list of all parts... cults3d.com/en/3d-model/game/rc-mini-jet-boat The 1806 will fit into the boat.