3D Printed RC Planes are Cheaper and Better? BF-109 & MiG-15 90mm FLIGHT

[@danoqamyasharahla6544]

3D printing is definitely the way to go, yeah 3D printers can cost a few hundreds, but in the long run it's much cheaper. The same plane that costs $500 on Motion RC you could print and make for less than $150 with all of the components.

[@toolbaggers]

Re-watch 4:57 $30 airframe but $400 total and a weeks worth of printing time. PLUS $38 for the plans.

[@i_dont_know_anymore223]

im pretty sure he's talking about the 109@@toolbaggers

[@95TeggyRS]

hes talking about either one. the transmitters 90mm engine and ecu cost money@@i_dont_know_anymore223

[@Lost_Hwasal]

If you get a printer that costs a few hundreds your hobby is going to be your 3d printer, not rc planes.

[@user-rx8qq8sk9ydv1ce5ib]

Do we need the engineering design / drawings otherwise how you are gonna print certain design, and pieces that fit together to form a plan. Anyone knows how it works?!

[@billjonesnation]

Did you fly over/behind the flight line? or are you only allowed to fly around in circuits without doing anything fun until the battery runs out?

[@nathanoverly277]

Ya bruh I fly wherever

[@hansturpyn5455]

watch out with spektrum, aka "team failsafe"

[@DocArtsStudio333]

more like pre programed to fail. spektrum is the worst. cheap china junk is better

[@RC-planes.]

Amazing job on flying these ,guys

[@wesKEVQJ]

That MiG handled awesomely.

[@lemonizer7000]

I built a few - couple of thin walled ones and some of the other larger ones. The durability is the issue. The planes flew quite well but never held up past 3-4 flights without some major structural issue showing related to the printing - just too may points of failure. At least for me, 3D printed planes aren't economical - I have hundreds of flights on some of my balsa and foam planes.

[@fyzobaba]

I have tried them all, from dollar tree foam boards, to foam planes( EPP, EPS,EPO), balsa, and 3 d printed planes. The best remains balsa. In terms of durability and best flight characteristics, Balsa is the way to go.

[@grabir01]

What printer do you use?

[@toolbaggers]

100% 3d print means no carbon or other material for spars and stringers skeleton??

[@Productive-RC]

Now those are gorgeous!!

[@ronaldprovencher7570]

I have that same model hanging off my ceiling ..3D printed 6 years ago ... BF-109

[@romanbreidenbach2234]

I like the BF 109

[@Jays_rcgarage]

Some of my planes have the SAFE option. These 2 planes didn’t !!

[@wwjoesr]

“Wow that sounds good”. Sweet 😊

[@libor-vitek]

1:07 Two mistakes in one sentence: 1) in description there is no link to 3D files, but to an e-shop with 3D files, 😉 2) it's not even a link, but raw text, so clicking on it does not do anything (link would transfer user to somewhere else), batch of operations "select/copy/paste" must be used instead. 😉 But this or that, nice flights. 👍👏🙂

[@toolbaggers]

He only added his personal affiliate links. 😎

[@romanbreidenbach2234]

In some of your airplanes, do you fly with safe?

[@Jays_rcgarage]

Most gave the option! These 2 planes didn’t. I like to keep safe on a switch just Incase 😂

[@larsulrich3356]

WHat model was the 109? The MiG's separation lines on the tail are wrong for mixing. They're completely separate like the F-86.

[@scottyb069]

Mate, what brand of EDF is in the Mig? The other builds I have seen sound like hair dryers, but this thing sounds awesome!

[@DandSCreations]

Just make sure you get a 12 blade it will souns good

[@SkylarReed-n9r]

where do you get those?

[@ShahriarFarkhan]

Awesome vid and planes! I am 3D printing my second plane. It's gonna open the door to a lot of awesome stuff, you an 3D print molds and carbon fibre wings. Question about the Mig - it looked like the tail was dragging - What was going on there?

[@Jays_rcgarage]

Thanks for watching !! No tail wheel: the landing gear was off a Corsair I believe and the mains are a little short so the back end touches the floor on the MiG lol skeleton building with spare parts!

[@ShahriarFarkhan]

@@Jays_rcgarage That makes sense and hear you on scarcity of parts. At least you got it finished and flying!

[@williamweinkauff8086]

How big of a 3D printer do you need for the 109?

[@3DPrintHangar_RC]

200mmx200mm

[@boxlessthinker1973]

Excellent!! Thank you!

[@jack78_]

thank you for sharing, i just started into 3d printing, love the video thnx 🛩

[@Jays_rcgarage]

Thank you !! I’ll be exploring it soon myself making videos of the entire process. Have you made a plane yet ?

[@jack78_]

@@Jays_rcgarage not yet, but i did grab the cub today, started to print some parts👍

[@jroar123]

I'm building a Triplane from WW1. It's just a kit from Guillows. Thee lazer cut wood is fantastic. Your printed aircraft are fantastic.

[@Jays_rcgarage]

Awesome!! Is it a Fokker? I’m building some foam kits soon. Have a bunch on order! Not stepping into balsa building just yet!

[@jroar123]

@@Jays_rcgarage Yes it is the Fokker D1 and it is a blast to build. It's small so you have to think about which servos to use and obviously a small batter and motor. It's a good kit but it's no 3D printed aircraft. That's my next venture. Happy flying and keep up with the videos. They are fun to watch. Thanks!

[@jroar123]

@@Jays_rcgarage I should have also said that I am going to start my 1/350 ship of the Turpitz. I also have the same scale of the USS Enterprise Space Ship. There is also the Klingon Battle Cruiser. Well now you know why I'm divorced.

[@toolbaggers]

Laser not lazer Light Amplification by Stimulated Emission of Radiation

[@jroar123]

@@toolbaggers It's a misspelling. Thank you for the correction. I trust that the meaning still came through? I just saw that I put 2 ee's in "The" as well. It's not like me to make so many mistakes while writing but it does happen from time to time. [Sorry]

[@valerijuskaniusas5349]

BF-109 needs to keep down flaps mixed with ailerons at sweet landings😊👍💪

[@goombahead634]

How much are the engines controllers servos etc. and how do you connect it

[@Jays_rcgarage]

All different prices. The website in description is where the plans are from and there’s more detailed info on his site. I will be doing 3D build soon on this channel and I’ll be able explain the whole process in videos

[@goombahead634]

@@Jays_rcgarage cool thanks. I’m new and I don’t understand how to connect servos to batteries and whatnot

[@m-e-m-e-y]

Currently printing a small Eclipson model a

[@AceFlights]

That mig 15 looks sick!!!!

[@ltfadl1]

Pretty damn dope! Might be looking into this, I've been eye balling the idea but since it's biblical on that sound I might be in lol. There's a viper in Poland, can't remember the guys name but OMG so damn biblical on the sound 😈😊👍🙌

[@Jays_rcgarage]

😂😂😂😂😂

[@PnwPryo]

Wow that mig I need to print this maybe in a smaller scale

[@mpojr]

l dont understand why the mig is dragging its tail on takeoff

[@toolbaggers]

Physics

[@Ricksworldtv]

What printer and filament were used? Nice video and very nice planes...

[@christianconlon8444]

Creality CR-10 V2 and Overture PLA

[@Ricksworldtv]

@@christianconlon8444 thanks, looks like I’m getting a new printer.

[@christianconlon8444]

Anytime my dude! Good luck!

[@thewitt76]

Luckily all the old Timers dont mind me using a novice foamy for my learning curve but I'm I'm building my first 3d printed airframes now. Having to bribe a buddy to actually run the print but soon I'll have a 3d prn of my own

[@toolbaggers]

The old timers are gonna have a stroke

[@toolbaggers]

Asking for something more than once makes you a beggar.

[@Don-413]

May I ask where you were flying?

[@Jays_rcgarage]

Old run down airport. It was bought out so we’ll be losing it soon :/

[@aheis1313]

Are you going to expand models? If so is the f18 a possibility

[@Jays_rcgarage]

I will be buying and flying models forever! I have the Eachine 50mm F-18 currently. Could get a bigger one in the near future

[@aheis1313]

@Jays_rcgarage yeah I saw your video I grabbed the hobby king f16 50mm because they were almost gone but I do want that eachine f18 foing to get the hobby king one as well I'm still a beginner but they are something to build towards for me. I was wondering if your buddy was going to do a f18 3d print or if thats possible at all? And what printer he used?

[@Jays_rcgarage]

@@aheis1313I’m going to get more info about the printer from him tomorrow .. meeting him at the field. I’ll keep you updated !

[@aheis1313]

@@Jays_rcgarage awesome thank you!!!!

[@ltfadl1]

Yall want a kick ass setup for the F18? Ket the kit version, go with the xfly 4s motor, get at least a 40amp ESC and program it for NiCD battery or get a 6s compatible ecs, then run 5s lipo batts, I use 1300 tattu 100c lipos. 97mph if my Gyro wasn't having a tantrum, I am sure it would've hit 100. You're welcome 😈

[@charleybarber86]

Can a person put a nitro engine on a 3d printed plane?

[@toolbaggers]

You can do anything...once. But for how long?

[@toolbaggers]

Are you asking for a friend?

[@charleybarber86]

@toolbaggers I'm asking for me. I've got several extra nitro engines, and to be truthful, balsa planes are getting to pricey for me.

[@rshotty9039]

there's people that get mad at you if you show up and fly a plane you got at the store? really?

[@lupusk9productions]

wait why do they hate "foamies" there?

[@joseenriquetomasperez3912]

Video of police question after question,.......let him fly please, or he will not be able to concentrate on the flight..🤫

[@mikelarin8037]

Are there actually fields that dont allow foamies? Wtf

[@Jays_rcgarage]

Lol yeah, by me in manorville there is one.

[@fpvvegan]

👀

[@ChessEffect11]

Flying a circular pattern after a while has got to get boring right? It's like Nascar but nothing interesting happens.

[@toolbaggers]

It's exactly like Nascar, the only fun is watching the crashes.

[@paulbellas8797]

Landing gear look a little weak...

[@daviddavids2884]

fyi it looks like the size of the exit duct on the mig is less-than optimal. exit area Should be Equal to the Effective Swept Area of the impeller. googletranslate

[@toolbaggers]

Or a little less for higher efflux speed. yahootranslate

[@lewiemotorsports3616]

Ask him how much he wants for the mig 15 lol

[@bearlaceration8971]

Thats gotta suck flying in circles then getting yelled at for it

[@Jays_rcgarage]

😂💯

[@ericevans6080]

Would be the last time I flew at that club. That is crazy and I would love to understand the rational. There was no one else in the air.

[@Swankthe____]

plastic doesnt work well in the cold! youre lucky if flew at all!

[@toolbaggers]

2:13

[@rcdavidk]

Oh no... they are still grumpy. So many times I've been told I'm cheating by 3D Printing a plane. I respond that they're cheating 'cause they didn't grow their own wood. Goofballs.

[@Jays_rcgarage]

😂😂😂 That’s the best answer I have ever heard lol

[@toolbaggers]

The plastic covering film also comes out of an extruding machine.

[@masjuggalo]

I want to say 25 years ago I spent two months gluing together and cutting and sanding and coating and building a plane and then I went and bought a fancy four channel radio and at nitro motor and a prop and balance that prop and did all the things and bought all the pieces and the end of the summer I went to go fly my plane and 30 seconds later I had a radio to servos a nitro motor and some kindling😂