3D Printed Rollup Dice Box Updates!

A 3D printed container to keep your tabletop dice organized and safe!
All the required files to make your own are available to download.
Printables
Collection - www.printables.com/@3DPrinty/...
Dice Box (Small) - printables.com/model/434575
Dice Box (Large) - printables.com/model/434601
Dice Tower Core - www.printables.com/model/437061
Deep Bins - www.printables.com/model/446355
Giant Mushroom - www.printables.com/model/455671
Thangs
Dice Box (Small) - thangs.com/file/813165
Dice Box (Large) - thangs.com/file/813167
Dice Tray - thangs.com/file/817018
Dice Tower Core - thangs.com/file/816162
Deep Bins - thangs.com/file/837004
Giant Mushroom - thangs.com/file/837003
Happy printing!
== Featured Printy ==
Customized Shutter Box Mini printed by pezliz
www.printables.com/model/4093...
== Materials ==
- Prusament Galaxy Black PLA
- Duramic 3D Marble PLA+
- Hatchbox Glitter Red PLA
- Hatchbox Brick Red PLA
== Credits ==
Intro Music By
Slogra
Other Music and SFX From
artlist.io/

[@masonl87]

The dice tower core is flipping BRILLIANT!

[@bananomgd]

Printed a couple overnight. They're fantastic!

[@salem0070]

I didn't know I wanted this.

[@jackhickin]

This channel makes me irrationally happy. Thank you for your work.

[@aaron7545]

My absolute favorite thing about your channel is the updates. A good design is never finished and a brilliant designer will always re-imagine them as he learns more or finds new fixations, haha. I'll stop with all the complements lest you be unable to fit an inevitable 3D scanned self-bust on your Prusa. 😆 Coincidentally I couldn't print my 300% Mushroom for a similar reason. 🤐 Thank you for the designs!

[@Ryzaki961]

Always look forward to these updates!

[@3DPrinty]

Thank you! There were lots of great suggestions :)

[@ygiagam]

Pure genius! Thanks

[@wbeel]

I've been watching all of your videos as soon as I spot them. Somehow the youtube algorithm doesn't want you to pup up in my feed. I've not seen any of your vids in my feed in the past year. And yes, I'm subscribed... I've had to look at your account manually... I wonder how many other people have this issue...

[@3DPrinty]

Thank you for putting in the extra effort to track me down! I don't do a very good job tailoring my videos to appease the algorithm.

[@Skelebean]

Thank you so much for everything you do! ❤

[@joerichards9068]

Just built this!

[@ManiacalMaker]

Amazing as always! Thank you so much

[@dennisgignac5103]

As usual, great job !!!

[@darrennew8211]

This is great. I'm planning to clean up all the random bits and chunks in my garage work area and the empty bins I can roll up would be great for that too. After that, I'll have to find some dice-game friends. :-)

[@Coolfwip]

Love this, thank you

[@redspud3]

Make the tower tray store on the ends. Might only need one catch tray that attaches to the tower.

[@SlytherinReviews]

Hmm the Dice Tower Core I'm thinking the tray could be split and made into Roller ends that can connect together along with being used for displaying the Roller Dice Box though I don't have a 3D Printer so I can't do any testing on the design and such

[@davesadler624]

If you ever do an update to this box again, would you consider adding the dice-seat to your removable tray? I'm awful at CAD but I tried my hand and included a photo on printables under 434575-rollup-dice-box-small/comments

[@3DPrinty]

I really shot myself in the foot by modeling the bins to be as shallow as possible to fit the dice I had. This might be a future remix, but it would either need to be a complete rework (to account for the deeper bins) or a remix based on the existing "Rumble roller" (model #446355). It is something I'll consider, though, if I revisit!

[@loags22]

I took the dice tower into tinkercad and cut away a pattern to give it a castle tower aesthetic. It didnt come out perfect because i couldnt get it exact but my next run will be much better

[@3DPrinty]

Sounds great! If you post it, let me know - I love seeing remixes.

[@VRWarLab]

Is there any variant to the bins that has the specific shape of the dice, so that they are not as noisy when the box moves around?

[@3DPrinty]

Not yet. My recommendation is adding craft foam to the bin without any dividers. You can even cut custom shapes, if you want, or just squish them in. Either way, the dice will be protected and quiet. This project has taught me that "standard" dice vary a LOT in size - so I probably won't make super precise bins which may or may not fit specific sets. I hope the foam solution works for you :)

[@cheezballs6489]

we need a roll up box fidget!

[@3DPrinty]

Fun idea :)

[@Technibyte_gaming]

I love this idea. Does anyone have good color combos (especially gold)?

[@3DPrinty]

I really like the prints which use back on the outside and the more colorful filament as an interior. That might work for gold too :)

[@chrisgrol5829]

where do you get good strength magnets. The ones I get are always trash

[@3DPrinty]

I look specifically for "neodymium" magnets. I don't trust listings that simply say "strong" or "super strong" because those descriptions don't seem to correspond to reality at all.

[@end_slayer]

Do you have a discord server? I really wanna ask questions about this design!

[@bryan240sxz]

What size magnets are being used here?

[@3DPrinty]

This uses 6x3mm cylinder magnets. You can use 6x2, but the magnets will be inset and a little weaker.

[@jandosilva6815]

Anyone else have issues with the dice tower core? I printed the large one but my dice do not fit through it.

[@3DPrinty]

It looks like some dice are just slightly larger than the ones I used when testing. By any chance, are you using the hex trays? Those may not let D20s sit entirely flat. An updated core with slightly more clearance is in the works.

[@pyrosive]

I struggle to pick out the right dice on my rolls. Any chance of a model for the tray that has a label above each slot?

[@3DPrinty]

Here's a remix that adds labels to the bottom of the tray. You could also use the text tool within your slicing software (PrusaSlicer/SuperSlicer/BambuStudio/OrcaSlicer) to add embossed text to the front wall of each bin :)

[@pyrosive]

@@3DPrinty I appreciate the quick response but forgive me - I don't see a link?

[@3DPrinty]

Sorry, let's try that again: www.printables.com/model/472852

[@pyrosive]

​@@3DPrinty thank you!

[@EridanStarWarsShortFilms]

I printed the large version but the D20 doesn't fit ;; Did I do something wrong ??

[@3DPrinty]

I'm sorry to hear that! While my own dice fit with a little room to spare, I have heard this a few times. Are you using the bins with hexagonal holes by any chance? If so, is the shape of the hole preventing the dice from sitting with one side flat on the bottom of the bin?

[@xiSuKxAtomix]

I am currently printing the core for the large version and I'm also having the issue of the d20 being taller than the bin. I have 2 bins printed right now. I'm holding off on printing the rest of the bins for now. My dice is definitely reaching the bottom of the bin but it is not flush with the top of the opening for the bin. I can definitely provide pictures if you'd like. Or if you think it isn't an issue, i can just go ahead and print the rest! Thank you for your design it's really cool and I'm excited to finish it and use it for my DnD sessions!

[@3DPrinty]

Are you planning on printing the normal large core or the dice tower core? I'm looking into an update that will give the dice a little head room and would be happy to send you the file early. If you use Printables, send me a message there, I can reply with the STL.

[@xiSuKxAtomix]

@@3DPrinty Thank you for the quick response! I am printing the Tower core right now. I will definitely shoot you a message on Printables right now!

[@WhiteXJack]

I am currently trying to put the frame top part into the threaded dice tower and it is a struggle to fit the two together 💀... Edit: after sanding both I gave up for now

[@3DPrinty]

Sorry to hear it gave you trouble. The two parts are a snap fit, so it's pretty tight. As long as the filament you're using isn't too brittle, the core should stretch just enough for the cap to snap on. I hope another attempt with a little more force works out for you!

[@WhiteXJack]

@@3DPrinty no it seems that I made a mistake the threaded top part is not the same as the normal top part , they have different sizes , so when I printed the threaded top part it was perfect

[@3DPrinty]

@@WhiteXJack Ah, you figured it out 10 hours before I saw your Printables comment. I'm glad you figured it out :)