3D Printer Not in Cura? Create a Custom Profile

[@bolo4358]

This video was very helpful to me. I have the K1 max and could find a profile for it. Thank you!

[@robmcdonald6808]

Thanks for this. I can’t wait to get set up once I’m in my new place. Keep em coming sir. I’m going to need to go back and rewatch a bunch once I’m set up lol

[@kubo527]

To get an accurate time estimate, install the "Printer Settings" plugin. Also set the speed and acceleration values ​​there. They should not change the values ​​indicated in the "Speed" tab, but they allow you to accurately calculate the printing times. This is because the slicer does not know the values ​​possibly limited by the printer firmware (this applies to all printers). Furthermore, it would be better to set the REAL values ​​of the different printing profiles supplied with the stock slicer - for each type of filament -, not those indicated as "maximum" in the advertising! I believe you also need the "Moonraker Connection" plugin to communicate with Klipper printers.

[@l0ckmanjohn]

Do you not need to enter volumetric flow in Cura? from my understanding the speeds are reliant on that.

[@Bbuzz8393]

Thanks for the great video. I have the Adventurer 5M and the same version of CURA you have, but I don't have the additional speed settings listed in the dropdown menu. I only have print speed. Any idea as to why? Thanks for your help!

[@nadigaming1074]

you have to hit the 3 lines next to serch in cura and set to expert i had that issue to

[@amathis58]

I am able to add my Ender 3 max neo. How do you get the printer included in the printer list under the manufacturer I have read somewhere this can be done but I have not found the video talking about how to do it.

[@R83TV]

Where is the new video on the K1 Max?

[@sergey5674]

I made it exactly how you did it but the printer get stuck with the extruder in the bed

[@NerdyFpv]

Same here.. bed and extruder heats up. But then nothing happens. Extruder just stays in the back right corner. Did you get this resolved? Cheers!

[@troyblackburn4522]

Why would you select Marlin gcode type in your slicer profile for the K1 when it’s a Klipper printer?

[@NerdyFpv]

Did you get this working with klipper? I did the same as in the video, but with Marlin like he says.. the bed and extruder heat up, but then nothing happens... Extruder just stays in the back of the printer..

[@troyblackburn4522]

@@NerdyFpv I use Klipper as my gcode type with no problems

[@NerdyFpv]

@@troyblackburn4522 My bad, just read you were talking about the K1. I was thinking of the FF 5mpro. I could not choose Klipper on the list there, and did Marlin like he did in the video. But not working. Will look into other settings.

[@clkb8moto]

5:10 220mm cubed

[@ernestonpurpose3293]

I need my K1 max to print PC but the Ender-3 Max profile won't let let select PC as a material. How do i get around this?

[@enigmaticreverieproduction5169]

Can you make a video specific for organic supports? Mine work the only problem I have is taking them off, they destroy the model as the model prints on them. The connecting points look like spaghetti lol

[@federicomassimomagurno]

Somebody did manage to create a custom profile for the anycubic Kobra 2 neo? If that so pls help me🙏🏻

[@VR6NAVYVW]

220 cubed not squared

[@clkb8moto]

Haha. I just typed the same thing. Good catch.