5 Reason Why Supports Fail! & How to Fix Them!

Рет қаралды 6,534

Күн бұрын

Today, I'm going to talk about tree supports in 3D printing. Sometimes, these supports don't work like we want them to. I'll show you the five main reasons they might not work and tell you how to fix them. We'll look at how to change some settings in ultimaker Cura Slicer we use for 3D printing to make our prints come out better. I'll share tips on making the supports stronger and how to make sure they stick to the printing bed so our projects turn out great. This video is like a guide that'll help you get better at making cool things with your 3D printer. Let's dive in and learn how to make our prints better together!
Deburring Tool: amzn.to/3I9e4Tj
JOIN THE FREE KZbin COMMUNITY DISCORD
🔴 / discord
JOIN MY PATREON HERE:
🔴 / itsmeadmade
00:00 - Introduction
01:11 - Isolated Towers
05:44 - Support Print Speed
08:38 - Z-Hop over Supports
11:33 - Brims
17:33 - THANK YOU!
18:08 - Support Pattern
23:06 - Bonus 1
24:38 - Bonus 2

Пікірлер: 26

@michelefromflorida7852 4 ай бұрын

I started losing my supports today. I busted out with my sublimation heat tape, I have a ton holding those supports down. I was 14 hours (17%) into the print. Not giving up. It’s holding so far & it’s almost 50% finished. Wish me luck 🤞🏻

@AnthonyJustin 4 ай бұрын

This is actually very helpful and straight forward with precise tips. Appreciate the help!

@tanujak98 4 ай бұрын

This is great, not many people talk about tree supports in detail. would love to learn more about tree supports

@ItsMeaDMaDe 4 ай бұрын

Yeah. I’ve had a lot of requests so this is the second of the series. (Dunno how many more)

@andyb7754 4 ай бұрын

Thank you, just in time because I'm trying tree supports for the first time today.

@ItsMeaDMaDe 4 ай бұрын

Good luck!

@MTRUITT95 4 ай бұрын

Great vid!

@debrasam5525 4 ай бұрын

Great video! Best video out on branch angle.

@ItsMeaDMaDe 4 ай бұрын

Awesome. Glad you liked it!

@debrasam5525 4 ай бұрын

@@ItsMeaDMaDe this will prep me to over come my fallen trees when I use ASA. Pla is fine. Bigger trunk or brim i guess.

@bruno1027 4 ай бұрын

Thank you very much for this video which will allow me to solve the problems I encounter with this type of support. However, can I use these same settings on PLA, PVA or Breakway media? Thank you for your reply.

@senfpreysl483 4 ай бұрын

Greetings. I’m from Germany and just started to paint my first figure. Tmnt Leonardo from la figures. Because of you! 😃😃Where can I get a texture board for my dry brush? Can’t find it around here. Thanks for the help.

@alextheviper2848 4 ай бұрын

Amazing video! But is there a way to make the bottom layers on supports look better. The bottom of prints i do arent that smooth.

@carlschulz1057 4 ай бұрын

Thanks for the series on supports. I am having a little trouble making the translation from Cura to Bambu Studio ... hope you can do a series for Bambu. On of the the biggest problems that I have with supports is REMOVING them. Usually I end up breaking off a piece of the model. I have tried both with using Bambu Support material as well as just using the filament for the supports.

@ItsMeaDMaDe 4 ай бұрын

Hey! Yes I’m planning on doing videos on Bambu studio as well.

@jeffreyvandepol6158 4 ай бұрын

good video for a beginner. too bad would have liked to see it for bambu lab studio

@WhereNerdyisCool 4 ай бұрын

I struggle with the perfect Support Z Distance....

@jamiemesser1990 2 ай бұрын

what if my tree supports are solid but always seem to break where the supports touch the model?

@jacobponce5086 3 ай бұрын

Question, I have a print that gets hit by the nozzle mid print how do avoid that

@ItsMeaDMaDe 3 ай бұрын

You want to mess with your zhop. I would do “retraction at layer change” then do zhop on retraction’s

@ShootingBlanks00 Ай бұрын

i'm over here now. lol

@radiotbo4646 4 ай бұрын

yes, but z-hop induces stringing

@maxharnisch314 4 ай бұрын

On the support strength, I think you left out "Support Wall Line Count". I have found with tree supports, increasing the wall lines makes for a much stronger support.

@ItsMeaDMaDe 4 ай бұрын

Hey! I left that out on purpose I’ll be discussing the pros and cons of that in a future video. I believe the best method to increase strength is the support pattern not the wall count.