3D Printing an Edelweiss Flower for a Necklace!

[@brycejeannotte7699]

That turned out really nice. When you are printing something that small you might want to try the 0.2mm nozzle. It produces an even finer surface finish.

[@tada3dprinting]

That's a good point. Thanks!

[@woodwaker1]

Nicely done, I am also a big fan of Tinerkercad. If you wanted to make more you could make a solid bottom and increase the hole size slightly.

[@tada3dprinting]

True. Thanks so much!

[@The3DPrintingGrandad]

I know you said you were using Bambu Slicer, but PrusaSlicer has an option torus (donut) shape in the Add Shape Modifiers. I use it on keychains.

[@tada3dprinting]

Ok I'll see if I can find something similar. Thanks!

[@The3DPrintingGrandad]

I have a design I want to turn into earrings, but I can't find a away to attach them to a stud.

[@tada3dprinting]

Maybe you could use something like this instead? www.amazon.com/Earring-Audab-1400pcs-Supplies-Findings/dp/B0885T4M8K/ref=sr_1_1_sspa?crid=12UY9403ANIAY&dib=eyJ2IjoiMSJ9.iko99aE-dY8_Kn_b7Je2D72OOg36e6q1h5tAymkCxsMfSc_iXFsTfzfbC7Hu2cL5VBrJWHDfVuRsPNLQsVSgmoa9UK3h2hnkKlqt4usEunQvT8-3iiYSklETOpIXoH2ei-oHKvJty7q5vTr7d92bE2p0S_yKK4Pm9rUXlJzOCnU0ORra0Nb4cASwCJXvq9iRQrflLCH90x8iRw4853FOwNzx_c3GQwOgQrNbX8AtCyy-COTbCnarg5ujw5rmQqs35T-kQ4Q_v7LwbxjlTCQyKyudhPmvp09Z5OYoSalyVgI.0wJV99frLbyStyPpE1UdtYeYyBnm4R6qvqFxlwh4f_I&dib_tag=se&keywords=earring+kit&qid=1723228623&sprefix=earring+kit%2Caps%2C165&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1

[@The3DPrintingGrandad]

@@tada3dprinting That's very close to what I'm looking for, thanks. Should help me find what I need. If I'm successful, I'll send you a pair.