Part 1 of making a 3D Printed Iron Man helmet from Captain America Civil War and Spiderman Homecoming. Part 2 is on the way; installing electronics.
Пікірлер: 116
@Adam1llion2 жыл бұрын
Where did you get this file from??
@stephencampbell65232 жыл бұрын
Aw cute dog
@meenasingh1753 жыл бұрын
Great helmet and क्यूट dog
@Galvatroon3 жыл бұрын
Haha thanks I appreciate it 🤙
@rgsv3d5764 жыл бұрын
Looking forward to seeing your future content!
@hassanahmed33123 жыл бұрын
What mark is this
@hellomynameis14192 жыл бұрын
@@hassanahmed3312 MK46
@amaldev55933 жыл бұрын
Nice
@spidermanofyoutube24262 жыл бұрын
Good, i love It ❤️
@Galvatroon5 жыл бұрын
If you'd like to see a more in depth video, or want to give a suggestion on what I should build next, let me know down in the comments.
@jaimevirlanruiz9534 жыл бұрын
Well, I would appreciate being able to see what kind of configuration you have in the program to use for 3d printing and, above all, how to apply the putty so that everything is completely uniform. How long has the entire process taken from printing, post-processing and painting? motorized ?, I wait for a response, greetings from the south of Spain and if you have more jobs it would be great to see them you are an artist
@Galvatroon4 жыл бұрын
Jaime Virlan Ruiz thank you! I will be releasing a video shortly about the electronics inside that motorize the faceplate and i will include how i configured the helmet in the slicing software :). I use Cura and printed the helmet into 3 parts: the Faceplate, the Jaw, and the rest of the head.
@Galvatroon4 жыл бұрын
Jaime Virlan Ruiz there are several videos on how to apply bondo and spot putty, but it is very similar to applying drywall. I can make another video regarding that in the future. Not including print time, the total finishing and painitng took around maybe 15-20 hours total, and the electronics i had to mess around with a bit so maybe another 2 hrs
@jaimevirlanruiz9534 жыл бұрын
Thank you very much for answering, I will wait to see that video with the motorization of the front plate and the components, a greeting@@Galvatroon
@lizardboydragons3783 жыл бұрын
@@Galvatroon Electronics Video?
@cKolmate3 жыл бұрын
have you apply a varnish after paint process ?
@Galvatroon3 жыл бұрын
i just added a gloss clear coat after everything
@Skitjamo4 жыл бұрын
I wish you’d make a part 2 bro, the best iron man mask video on here tbh atleast to me. Yours looks fire
@Galvatroon3 жыл бұрын
Thanks bro i really appreciate it. Sorry for the late reply, but part 2 will be up soon
@matthewcubbet5422 жыл бұрын
It is also better to sand outside to not breath in the plastic particles
@Galvatroon2 жыл бұрын
Dont worry bro i keep a dust mask on whenever im sanding, and my shop has a ventilation system
@DRIOLI3 жыл бұрын
nice !
@Galvatroon3 жыл бұрын
Thanks!!
@abguru60114 жыл бұрын
Witch printer you use..?
@Galvatroon3 жыл бұрын
Creality CR-10
@michaelanderson35283 жыл бұрын
How do you print the chin strap separately from the rest of the helmet?
@spydey64743 жыл бұрын
I just sliced it in Slic3r. I would recommend watching Frankly Built for tips on printing iron man helmets. kzbin.info/door/snKS1fVNJ1yjCkGOXXDd4A he has loads of tips and tricks!
@Galvatroon3 жыл бұрын
If u dont have slic3r like me u can also use meshmixer
@3dfinley9002 жыл бұрын
You should try to make it notarized
@madness2live4 жыл бұрын
Great Video! Do you mind dropping the link to the STL please?
@Galvatroon4 жыл бұрын
its by happy moon on thingiverse
@Galvatroon4 жыл бұрын
www.thingiverse.com/thing:3563385
@madness2live4 жыл бұрын
@@Galvatroon Thank you!
@haroldbooth60023 жыл бұрын
How thick is the print And fill
@facundooneto70182 жыл бұрын
@@Galvatroon did you have to modify the stl or just scale to fit?
@haseebdurrani59852 жыл бұрын
How much did it cost to you and how much you can sell it for when you are all done
@Galvatroon2 жыл бұрын
cost me about 25$ in filament. im not going to sell this but if you did you could put whatever price you want on it i guess.
@3dfinley9002 жыл бұрын
You should try to make it motorized
@Galvatroon2 жыл бұрын
I did bro, check out part 2!
@Lolodosis-Abge3 жыл бұрын
Can you pls tell me what Spray you used? Cause i cant find any Gold spray like that.
@Galvatroon3 жыл бұрын
the kind i used in this video was good color, but not durable. in the prt 2 to this video i used “champagne mist” by rust-oleum
@47thronin44 жыл бұрын
Grate work. Can i ask what size printer did you use
@Galvatroon4 жыл бұрын
My printer is the creality cr-10, which has a build volume of 300mm x 300mm x 400mm
@47thronin44 жыл бұрын
@@Galvatroon thank you
@obewan3462 жыл бұрын
Which printer are you using for the helmet please ?
@Galvatroon6 ай бұрын
I used a Creality CR-10, but id reccomend different printers now, its outdated.
@johnnypare74263 жыл бұрын
How many rolls did it take to do that
@Galvatroon3 жыл бұрын
i think roughly a roll and a half, so about 1.5kg including supports
@michaeljohnston2432 жыл бұрын
What model printer is that?
@Galvatroon2 жыл бұрын
Creality CR-10
@mrmakinist3 жыл бұрын
will you make ironman full suit
@Galvatroon3 жыл бұрын
currently in progress, i will make some more videos regarding that in the future
@METALGREEEN2 жыл бұрын
Link for 3d model please
@Galvatroon2 жыл бұрын
Available by happymoon on thingiverse
@wayneglenn24824 жыл бұрын
How long did the print take?
@Galvatroon3 жыл бұрын
roughly 40-80 hours
@jasonpatterson18482 жыл бұрын
What size do u print this at please and how thick thank you 👍
@Galvatroon2 жыл бұрын
I believe i did 110% just cause my head is a little bigger, and kept normal layer thickness
@jasonpatterson18482 жыл бұрын
@@Galvatroon okie thank you 👍
@Galvatroon2 жыл бұрын
@@jasonpatterson1848 no problem boss
@MultiAnnelore3 жыл бұрын
love it
@jaimevirlanruiz9534 жыл бұрын
Hello good afternoon, I love how the helmet has been, I have an ender 3 and when I put the largest part of the helmet to print I have also oriented it so that it does not create much support for me but how do you remove the base that it creates in the back of the helmet? do you use an electric sander or cutting pliers? is that I would like it to be as smooth and homogeneous as possible, I wait for a response, thank you very much and greetings
@Galvatroon4 жыл бұрын
Jaime Virlan Ruiz After i printed it i did have a bit of trouble removing it from the bed, and the way i had it oriented, with the back of the helmet facing down, used little amount of supports compared to the other options, and the least amount of time. There was more clean up and sanding involved and for that i just used some bondo and an orbital sander and it worked out great for me
@Galvatroon4 жыл бұрын
Just using some needle nose pliers will remove the bulk of the supports
@jettaglnegro3 жыл бұрын
Que opinas de este brazo ironman App kzbin.info/www/bejne/fH2vhYh5ecyMj8U g
@leonbach403 жыл бұрын
@@Galvatroon how big is the part?
@Galvatroon3 жыл бұрын
@@leonbach40 if you are talking about the model size, i scaled it to about 115% to fit my head
@toppingpilot20974 жыл бұрын
Y don't you upload more
@Galvatroon3 жыл бұрын
Sorry just been busy, new video will be up soon.
@StickmanFN_YT Жыл бұрын
Can i have the files
@TheXLab2 жыл бұрын
Can you share stl??
@LBDByt4 жыл бұрын
Where is part 2
@Galvatroon3 жыл бұрын
On the way. It'll be up soon
@dracoff26713 жыл бұрын
This is my favourite armor
@Galvatroon3 жыл бұрын
Mine too
@gabzmann72704 жыл бұрын
@Joetoys Zhu I’m the editor of a gaming page on TikTok and Facebook. Do we have permission to use your video? You will be credited. Kind Regards.
@Galvatroon3 жыл бұрын
Go for it! Sorry for the late reply.
@gabzmann72703 жыл бұрын
@@Galvatroon It's ok, thanks very much!
@matthewcubbet5422 жыл бұрын
Just have to remember to wear a face mask as it can be extremely harmful to inhale those fine particles of plastic when sanding
@Galvatroon2 жыл бұрын
I appreciate your concern, saftey is important to me so i always keep the proper ppe on me
@suhanzama28492 жыл бұрын
Can u plz give stl files and Arduino code
@fkingride.55003 жыл бұрын
could you share the stl files for this plzzzz????
@Galvatroon3 жыл бұрын
the file is available on thingiverse ill put a link to the model
@Galvatroon3 жыл бұрын
www.thingiverse.com/thing:3563385
@franklinschmidt12 жыл бұрын
@@Galvatroon that link goes to a bust of the suit where can we get the helmet
@mrmakinist3 жыл бұрын
where is the folder mannnn
@Galvatroon3 жыл бұрын
folder?
@Lolodosis-Abge3 жыл бұрын
Hey i printed it too, but the chin....block me. How can i wear it
@Galvatroon3 жыл бұрын
it depends on how big you scaled it. mine is around 110-115% the original file and the chin still blocks a bit, but its still manageable to fit on my head
@Lolodosis-Abge3 жыл бұрын
@@Galvatroon oh man, there has to be a way. I cant start again. Maybe if i cut it of and clip the chin with magnetics or something
@Galvatroon3 жыл бұрын
@@Lolodosis-Abge cutting into it is always an option justs make sure to fill the infill edges with some kind of filler so it doesnt scratch your chin. the other option would be to remove the bulk of the chin entirely on the bottom
@Lolodosis-Abge3 жыл бұрын
@@Galvatroon Yea, but i am not sure how i can do this. Its my first 3d print and i dont know how i can put it back together. Maybe you wanna make a video about that?
@Galvatroon3 жыл бұрын
@@Lolodosis-Abge i can make a short video on it forsure but in the meantime there may be other creators with videos similar. using a cutoff disc on a dremel tool works relativley well
@cpafaux72324 жыл бұрын
No stl ?....-1
@Galvatroon4 жыл бұрын
The Stl file is in response to Madness2live’s comment.
@Galvatroon3 жыл бұрын
Sorry for the miscommunication
@hassanahmed33123 жыл бұрын
What mark is this
@Galvatroon3 жыл бұрын
46/47, from both captian america civil war and spiderman homecoming
@hassanahmed33123 жыл бұрын
@@Galvatroon what spray cans did u use
@Galvatroon3 жыл бұрын
@@hassanahmed3312 it was a bit of a process but i sprayed everything with a silver krylon paint, then applied dupli-color’s mettalic red automotive paint. and for the gold i used “champagne mist” by rust-oleum
@hassanahmed33123 жыл бұрын
@@Galvatroon and what kind of sand paper did u use
@Galvatroon3 жыл бұрын
@@hassanahmed3312 im not sure i just wen 80 grit - 180 grit - 220 grit - 400 grit
@rozgranix3 жыл бұрын
Where is the print link
@Galvatroon3 жыл бұрын
i have the link available in another comment up there somwehere
@Galvatroon3 жыл бұрын
www.thingiverse.com/thing:3563385
@rozgranix3 жыл бұрын
Ok thanks
@vedant3552 жыл бұрын
Send me stl file
@royalaadmi55302 жыл бұрын
Hiii
@Echo_3D13 жыл бұрын
And your not gonna bother to say which one it is, or any general info at all? Not cool.