3D Printing Meets Robotics: How to Make Your Own SMARS Robot

In this video, I'm showing you how to 3D print & assembly of the SMARS Robot with the Arduino Uno. This is a project you can do on your own and it's a great way to learn how to use 3D printing and Arduino Uno.
If you're interested in learning more about 3D printing and Arduino, then this is the video for you! In this project, you'll learn how to print the SMARS Robot with the Arduino Uno. This is a project that you can do on your own and it's a great way to learn how to use 3D printing and Arduino.
Get SMARS Robot Components, Codes..- 3delworld.com/...
SMARS Robot 3D Printed
3D Printed ROBOT
3d printed Arduino projects
Arduino Projects 2023
obstacle avoiding robot using Arduino Uno
.
Model used in video :
SMARS Modular Robot - www.thingivers...
.
Things Used In Videos-
Arduino UNO REV3: amzn.to/3xgytk0
Motor N20: amzn.to/3jIKtI0
L293D DC Motor Drive Shield: amzn.to/3K2wqrk
HC-06 Bluetooth 2.0: amzn.to/3HRgmWQ
Ultrasonic Module Distance Sensor: amzn.to/3K0KVMd
Breadboard Jumper Wires: amzn.to/3IeOKfE
9 Volt Cell Rechargeable Batteries: amzn.to/3xfknPP
.
USEFUL Things for Your 3D Printer -
1) Filament Friday 3D Print Tool Kit : amzn.to/3oLNTIH
2) Mintion Beagle Camera for 3D Printer : amzn.to/3vBnYaC
3) SUNLU Filament Dryer : amzn.to/3vBnocN
4) Creality 3D Printer Ender 3 S1 Pro : amzn.to/3zPxrh3
5) OVERTURE Silk Filament PLA : amzn.to/3zqIZ8V
.
Are you a 3d modeler or designer
looking for a platform
to showcase your work??
Fill this form to send your 3d models to 3DELWORLD. #3dprinting #3dprints
docs.google.co...
Stay connected and spend your valuable time to watch and learn something new.
.
Follow us on:
Instagram: / 3delworld
.
For Business Queries:
[e-mail]
.
► Music Credit:
Rough Nights by Artificial.Music & Mehul ShaRma
/ artificial-music
/ mehul-sharma-2. .
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download: bit.ly/3DsBQrz
Music promoted by Audio Library • Rough Nights - Artific...
.
Dawn by Wanheda / user-724527508
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/3Y8QJXV
Music promoted by Audio Library • Dawn - Wanheda (No Cop...
.
#3dprinter #3dprinting #3dprintingtimelapse #3dprintingus #3dprintinggermany #3dprintinguk #3dprinted

[@KoleStojanoski]

amazing video 😎!

[@3DELWORLD]

Glad you enjoyed it 😊👍

[@diveshkumar8337]

What a great video

[@3DELWORLD]

Glad you think so!

[@hemantsusodiya3538]

Video is very nice!

[@aaliyakhan2463]

liked a lot

[@maurovianna4702]

Good looking robot! I just found my next project!

[@3DELWORLD]

Glad you find your new project 😀👍

[@piushmishara9617]

Crazy video 🤠🤠🤠

[@arushichawal7606]

Good ♥️

[@jorel973]

I love it I might make one as well, thank you for the great videos 👍

[@3DELWORLD]

Glad it helped 😊 stay tuned for more👍

[@conorstewart2214]

Cool robot. One possible improvement could be to stick the tracks together better, at the moment it is only friction holding the filament used as a pin in. If you melted the ends with a soldering iron or 3D printing pen then it would prevent the tracks from coming apart.

[@3DELWORLD]

That's a good Idea, I will try that 😊

[@prasadbelgi2121]

Mast very good 👍

[@3DELWORLD]

Glad you think so!

[@samarshaikh5601]

OMG 🔥🔥🔥🔥

[@pablograciasanchez7953]

Jesucristo te ama muchísimo, arrepiéntete de tus pecados y ten perdón de pecados en Su Nombre

[@AlexAlex-bh8fi]

Cool nice

[@GaWoP]

Can you share or post the link to the app that is used to control this device? You left off one of the most fundamental pieces of this project working...

[@3DELWORLD]

I am using the "Bluetooth RC Controller" app (that blue color app with a car logo on it), but you can use it by your preference. Sometimes some apps have bugs, that's why I didn't post any link 😊👍

[@NishadShivraj007]

Oo

[@valentinliubomirbadiu9195]

@@3DELWORLD Hello, is there also an app for iPhone ? This one is for Android only.

[@benjibitter]

Hello, I am creating this robot and I use a 298p shield and a HC06 bluetooht module. What changes do I have to make in the code and in the connection to be able to manipulate the SMARS? I hope you can help me

[@briangoldberg8242]

Great project. I printed and built the SMARS and I used the same motor shield and components you recommended. I'm trying to upload the sketch for the ultrasonic obstacle avoidance, but something is missing. What sketch and library files did you use? I'm not a programmer, so creating my own sketch is unlikely. Any help you can offer would be greatly appreciated. Thank you!

[@3DELWORLD]

Glad it helped sir, I have created page for code/sketch. you will find Code/Sketch Here: 3delworld.com/how-to-make-smars-robot-3d-printed-2023/

[@briangoldberg8242]

Thanks for the help. I got it working! Awesome project. Great find. Keep them coming!

[@prajenlittledancestar6458]

Can we hve ur phone number sir we r unable to run the robot

[@davidespinosaalarcon1234]

Hello, sir a question the mechanisms at what scale are printed, because in my case to print them at 100% does not let me connect them together with the filament wires. Please help me

[@trackpadgod]

Hello, I saw that you have added an on/off switch. May I know how you have done that(wiring) and which switch you bought?

[@FLYHIGHDIY]

But how do u change battery

[@jabeatsproductions8430]

Hello!!!! What RPM has rhe motors??? Thanks!! Loved the video👌❤❤

[@fieryscout2110]

9V battery is not sufficient to provide power to SMARS. Any suggestions?

[@LogicMathh]

thnx

[@Jod-pd6qh]

What about the ultrasonic sensor?

[@KavishsWorld1133]

I just 3d printed the tracks for the SMARS Robot but the holes are too small so can you please suggest what to do?

[@mamad8263]

Hey, what 3d printer / slicer did you use ? I’m wondering what’s wrong with my print I can’t get the mechanical tracks to print properly. It just goes haywire and melds to one big glob of filament 😭

[@yaozongchen5855]

Cool!! But how to charge the 9v BATT?

[@3DELWORLD]

I have Rechargeable 9 volt li-ion battery, bought it from e commerce store.

[@usenm1i]

cutie patotie

[@inteligenciafutura]

it's lovely

[@3DELWORLD]

Yes it is 🤩

[@kameronyoung781]

Amazing video! Which app are you using to control it?

[@3DELWORLD]

Glad you liked, the Bluetooth RC contoller app

[@solehb.1308]

​@@3DELWORLDcan you provide us the link for the app ,please😊

[@gregs8629]

Why might my HC-06 for bluetooth not flash? Do i connect it to something other than the motor sheild?

[@Spyralv4r3]

Ensure you connected it properly to the motor shield

[@marcjeromecapuno7086]

how many tracks needed for the wheels

[@3DELWORLD]

32 I guess not sure !!!

[@movilgame3016]

Que se usa para unilas? 1:08

[@3DELWORLD]

1.75mm filament

[@Cody_123-34]

Hello, the application you use is not available in the play store ;(what would be another application that I could use? 😢😢

[@3DELWORLD]

Try different one, which supports Bluetooth analogs

[@hariramchandar]

Where I can download the APP, all I built

[@3DELWORLD]

I download it from App store.

[@Pixels...]

Would it be possible to use a camera instead of a ultrasonic sensor? Or would I have to use something like a raspberry pi?

[@Spyralv4r3]

There could be other microcontrollers that can give you camera support but I think a raspberry pi is the most suitable and obvious choice

[@KavishsWorld1133]

Can I use an HC-05 Bluetooth module instead of an HC-06 Bluetooth module?

[@3DELWORLD]

Yes, HC-05 Bluetooth works smooth

[@dedey0637]

is a resin 3d printer good too for robotic?

[@3DELWORLD]

Yes, you can print this with resin, compare all parts total weight in slicer of both FDM vs Resin, which one is lighter.

[@trevorlauv]

can you use a arduino mega board instead?

[@3DELWORLD]

You can, but you have to make changes in 3d model and also in Arduino code

[@trevorlauv]

what changes do you have to make in the code and can you send them to me? plz and thank you?

[@Legnd292]

How can I get the app to control the robot. Or do I have to design this myself

[@Spyralv4r3]

I think they removed it from the play store, not sure why... But I believe you can still get the apk from the internet

[@Legnd292]

@@Spyralv4r3 awww dang well at least I can get it somewhere thx

[@feras__2198]

Sorry but how many pieces I had to print of mechanical track ?

[@3DELWORLD]

For track 16 for one side and 16 for other, total 32 pieces.

[@juliolugo5511]

Where is the 3d model for what you have to print and what are those things?

[@3DELWORLD]

Link given in the description : 3delworld.com/how-to-make-smars-robot-3d-printed-2023/

[@RoboDIYer]

Hi, how much RPM have the N20 motors?

[@jabeatsproductions8430]

Good question😬😬 does anyone know??

[@Crimenarchivado]

hola para crear-lo es obligatorio hacer eso de el ordenador?

[@3DELWORLD]

Hello, for 3d printing you need to slice a 3d model in your computer for 3d printer and also you need a PC to code Arduino (also done by android smartphone).

[@3DELWORLD]

Hola, para la impresión en 3D, necesita cortar un modelo 3D en su computadora para la impresora 3D y también necesita una PC para codificar Arduino (también hecho por un teléfono inteligente Android).

[@3d_stampa_ivanjica]

When I copy your code into the arduino idle app it shows an error. What is the problem.

[@3DELWORLD]

what kind of error you are facing? also try this, copy the code and first paste it into note pad. and from copy it from the notepad to Arduino app with new sketch.

[@Ayhamkindle]

Good looking robot.... How did you create the phone app? do you have a tutorial for creating such mobile - arduino based apps?

[@3DELWORLD]

Glad you like the video, I have not created that android Bluetooth app. It is already available on play store.

[@avyayjain7896]

hi can you provide 3d files for the robot i tried finding it but could not find it

[@3DELWORLD]

Hello, Link is also available in description. www.thingiverse.com/thing:2662828

[@geimarygonzalezpino9953]

Cuáles son los materiales??

[@3DELWORLD]

Things You Need For This Project: 3delworld.com/how-to-make-smars-robot-3d-printed-2023/

[@tk-n-b8-763]

Plz can you give me the code with ultrasonic

[@3DELWORLD]

Sure: drive.google.com/drive/folders/1d5Fo9JU2dxaz12Q1zFZSpQlanErb9FA8?usp=share_link

[@KumpulanTugas-e5x]

Untuk membuat total habis berapa

[@3DELWORLD]

I forgot the total cost 😅

[@happytazer2709]

Brother i have 50rpm motor is it posible?

[@3DELWORLD]

n20 Motor ?? if yes then try it. it might work.

[@jabeatsproductions8430]

Did it work with 50rpm brother??? Is it good??

[@feras__2198]

Where’s the code of Arduino

[@3DELWORLD]

Link is in the description: 3delworld.com/how-to-make-smars-robot-3d-printed-2023/

[@feras__2198]

Thanks

[@fgibgijf]

Where s code

[@3DELWORLD]

Here it is: drive.google.com/drive/folders/1d5Fo9JU2dxaz12Q1zFZSpQlanErb9FA8?usp=share_link

[@fgibgijf]

@@3DELWORLD thank you bro 👍🙏😁

[@3DELWORLD]

@@fgibgijf Wlcm bro ❤

[@pablograciasanchez7953]

Jesucristo te ama muchísimo, arrepiéntete de tus pecados y ten perdón de pecados en Su Nombre

[@suambuli]

Flagging the site for download as virus? May be not virus but tracking.

[@3DELWORLD]

The site is safe 👍

[@Njedit26]

Are bhai KZbin ke paise se light kharido andhera hai ham sabko nahin dikh raha 😂

[@feras__2198]

whin I put the code Arduino tell me this not correct #include why ?

[@3DELWORLD]

Install "Adafruit motor shield library" on Arduino IDE. then create new sketch and paste full code.

[@feras__2198]

@@3DELWORLD it works thank you 🙏 ❤️

[@3DELWORLD]

@@feras__2198 Glad it helped🎉❤😊

[@phuonganh6445]

tôi không thể gắn cảm biến siêu âm của mình vừa với file của bạn nó dài hơn 2mm

[@3DELWORLD]

Which ultrasonic part (model number) do you have ?

[@phuonganh6445]

@@3DELWORLD That is HC-SR04

[@phuonganh6445]

​@@3DELWORLD I edited the stl with SolidWorks and it worked, thank you very much

[@3DELWORLD]

Good to hear 😊 Enjoy!

[@geimarygonzalezpino9953]

Cuáles son los materiales??

[@JavierPavónAlonso]

Hi, how much RPM have the N20 motors?

[@sirwandzhwar]

100rpm