3D Printing Meets Robotics: How to Make Your Own SMARS Robot

[@diveshkumar8337]

What a great video

[@3DELWORLD]

Glad you think so!

[@maurovianna4702]

Good looking robot! I just found my next project!

[@3DELWORLD]

Glad you find your new project 😀👍

[@KoleStojanoski]

amazing video 😎!

[@3DELWORLD]

Glad you enjoyed it 😊👍

[@hemantsusodiya3538]

Video is very nice!

[@aaliyakhan2463]

liked a lot

[@piushmishara9617]

Crazy video 🤠🤠🤠

[@arushichawal7606]

Good ♥️

[@jorel973]

I love it I might make one as well, thank you for the great videos 👍

[@3DELWORLD]

Glad it helped 😊 stay tuned for more👍

[@GaWoP]

Can you share or post the link to the app that is used to control this device? You left off one of the most fundamental pieces of this project working...

[@3DELWORLD]

I am using the "Bluetooth RC Controller" app (that blue color app with a car logo on it), but you can use it by your preference. Sometimes some apps have bugs, that's why I didn't post any link 😊👍

[@NishadShivraj007]

Oo

[@valentinliubomirbadiu9195]

@@3DELWORLD Hello, is there also an app for iPhone ? This one is for Android only.

[@conorstewart2214]

Cool robot. One possible improvement could be to stick the tracks together better, at the moment it is only friction holding the filament used as a pin in. If you melted the ends with a soldering iron or 3D printing pen then it would prevent the tracks from coming apart.

[@3DELWORLD]

That's a good Idea, I will try that 😊

[@samarshaikh5601]

OMG 🔥🔥🔥🔥

[@pablograciasanchez7953]

Jesucristo te ama muchísimo, arrepiéntete de tus pecados y ten perdón de pecados en Su Nombre

[@prasadbelgi2121]

Mast very good 👍

[@3DELWORLD]

Glad you think so!

[@AlexAlex-bh8fi]

Cool nice

[@benjibitter]

Hello, I am creating this robot and I use a 298p shield and a HC06 bluetooht module. What changes do I have to make in the code and in the connection to be able to manipulate the SMARS? I hope you can help me

[@briangoldberg8242]

Great project. I printed and built the SMARS and I used the same motor shield and components you recommended. I'm trying to upload the sketch for the ultrasonic obstacle avoidance, but something is missing. What sketch and library files did you use? I'm not a programmer, so creating my own sketch is unlikely. Any help you can offer would be greatly appreciated. Thank you!

[@3DELWORLD]

Glad it helped sir, I have created page for code/sketch. you will find Code/Sketch Here: 3delworld.com/how-to-make-smars-robot-3d-printed-2023/

[@briangoldberg8242]

Thanks for the help. I got it working! Awesome project. Great find. Keep them coming!

[@prajenlittledancestar6458]

Can we hve ur phone number sir we r unable to run the robot

[@davidespinosaalarcon1234]

Hello, sir a question the mechanisms at what scale are printed, because in my case to print them at 100% does not let me connect them together with the filament wires. Please help me

[@trackpadgod]

Hello, I saw that you have added an on/off switch. May I know how you have done that(wiring) and which switch you bought?

[@FLYHIGHDIY]

But how do u change battery

[@fieryscout2110]

9V battery is not sufficient to provide power to SMARS. Any suggestions?

[@LogicMathh]

thnx

[@KavishsWorld1133]

I just 3d printed the tracks for the SMARS Robot but the holes are too small so can you please suggest what to do?

[@mamad8263]

Hey, what 3d printer / slicer did you use ? I’m wondering what’s wrong with my print I can’t get the mechanical tracks to print properly. It just goes haywire and melds to one big glob of filament 😭

[@jabeatsproductions8430]

Hello!!!! What RPM has rhe motors??? Thanks!! Loved the video👌❤❤

[@gregs8629]

Why might my HC-06 for bluetooth not flash? Do i connect it to something other than the motor sheild?

[@Spyralv4r3]

Ensure you connected it properly to the motor shield

[@Jod-pd6qh]

What about the ultrasonic sensor?

[@yaozongchen5855]

Cool!! But how to charge the 9v BATT?

[@3DELWORLD]

I have Rechargeable 9 volt li-ion battery, bought it from e commerce store.

[@inteligenciafutura]

it's lovely

[@3DELWORLD]

Yes it is 🤩

[@Pixels...]

Would it be possible to use a camera instead of a ultrasonic sensor? Or would I have to use something like a raspberry pi?

[@Spyralv4r3]

There could be other microcontrollers that can give you camera support but I think a raspberry pi is the most suitable and obvious choice

[@marcjeromecapuno7086]

how many tracks needed for the wheels

[@3DELWORLD]

32 I guess not sure !!!

[@hariramchandar]

Where I can download the APP, all I built

[@3DELWORLD]

I download it from App store.

[@usenm1i]

cutie patotie

[@dedey0637]

is a resin 3d printer good too for robotic?

[@3DELWORLD]

Yes, you can print this with resin, compare all parts total weight in slicer of both FDM vs Resin, which one is lighter.

[@Cody_123-34]

Hello, the application you use is not available in the play store ;(what would be another application that I could use? 😢😢

[@3DELWORLD]

Try different one, which supports Bluetooth analogs

[@KavishsWorld1133]

Can I use an HC-05 Bluetooth module instead of an HC-06 Bluetooth module?

[@3DELWORLD]

Yes, HC-05 Bluetooth works smooth

[@kameronyoung781]

Amazing video! Which app are you using to control it?

[@3DELWORLD]

Glad you liked, the Bluetooth RC contoller app

[@solehb.1308]

​@@3DELWORLDcan you provide us the link for the app ,please😊

[@juliolugo5511]

Where is the 3d model for what you have to print and what are those things?

[@3DELWORLD]

Link given in the description : 3delworld.com/how-to-make-smars-robot-3d-printed-2023/

[@trevorlauv]

can you use a arduino mega board instead?

[@3DELWORLD]

You can, but you have to make changes in 3d model and also in Arduino code

[@trevorlauv]

what changes do you have to make in the code and can you send them to me? plz and thank you?

[@3d_stampa_ivanjica]

When I copy your code into the arduino idle app it shows an error. What is the problem.

[@3DELWORLD]

what kind of error you are facing? also try this, copy the code and first paste it into note pad. and from copy it from the notepad to Arduino app with new sketch.

[@feras__2198]

Sorry but how many pieces I had to print of mechanical track ?

[@3DELWORLD]

For track 16 for one side and 16 for other, total 32 pieces.

[@Legnd292]

How can I get the app to control the robot. Or do I have to design this myself

[@Spyralv4r3]

I think they removed it from the play store, not sure why... But I believe you can still get the apk from the internet

[@Legnd292]

@@Spyralv4r3 awww dang well at least I can get it somewhere thx

[@Crimenarchivado]

hola para crear-lo es obligatorio hacer eso de el ordenador?

[@3DELWORLD]

Hello, for 3d printing you need to slice a 3d model in your computer for 3d printer and also you need a PC to code Arduino (also done by android smartphone).

[@3DELWORLD]

Hola, para la impresión en 3D, necesita cortar un modelo 3D en su computadora para la impresora 3D y también necesita una PC para codificar Arduino (también hecho por un teléfono inteligente Android).

[@Ayhamkindle]

Good looking robot.... How did you create the phone app? do you have a tutorial for creating such mobile - arduino based apps?

[@3DELWORLD]

Glad you like the video, I have not created that android Bluetooth app. It is already available on play store.

[@RoboDIYer]

Hi, how much RPM have the N20 motors?

[@jabeatsproductions8430]

Good question😬😬 does anyone know??

[@avyayjain7896]

hi can you provide 3d files for the robot i tried finding it but could not find it

[@3DELWORLD]

Hello, Link is also available in description. www.thingiverse.com/thing:2662828

[@tk-n-b8-763]

Plz can you give me the code with ultrasonic

[@3DELWORLD]

Sure: drive.google.com/drive/folders/1d5Fo9JU2dxaz12Q1zFZSpQlanErb9FA8?usp=share_link

[@happytazer2709]

Brother i have 50rpm motor is it posible?

[@3DELWORLD]

n20 Motor ?? if yes then try it. it might work.

[@jabeatsproductions8430]

Did it work with 50rpm brother??? Is it good??

[@KumpulanTugas-e5x]

Untuk membuat total habis berapa

[@3DELWORLD]

I forgot the total cost 😅

[@geimarygonzalezpino9953]

Cuáles son los materiales??

[@3DELWORLD]

Things You Need For This Project: 3delworld.com/how-to-make-smars-robot-3d-printed-2023/

[@feras__2198]

Where’s the code of Arduino

[@3DELWORLD]

Link is in the description: 3delworld.com/how-to-make-smars-robot-3d-printed-2023/

[@feras__2198]

Thanks

[@pablograciasanchez7953]

Jesucristo te ama muchísimo, arrepiéntete de tus pecados y ten perdón de pecados en Su Nombre

[@fgibgijf]

Where s code

[@3DELWORLD]

Here it is: drive.google.com/drive/folders/1d5Fo9JU2dxaz12Q1zFZSpQlanErb9FA8?usp=share_link

[@fgibgijf]

@@3DELWORLD thank you bro 👍🙏😁

[@3DELWORLD]

@@fgibgijf Wlcm bro ❤

[@suambuli]

Flagging the site for download as virus? May be not virus but tracking.

[@3DELWORLD]

The site is safe 👍

[@Njedit26]

Are bhai KZbin ke paise se light kharido andhera hai ham sabko nahin dikh raha 😂

[@feras__2198]

whin I put the code Arduino tell me this not correct #include why ?

[@3DELWORLD]

Install "Adafruit motor shield library" on Arduino IDE. then create new sketch and paste full code.

[@feras__2198]

@@3DELWORLD it works thank you 🙏 ❤️

[@3DELWORLD]

@@feras__2198 Glad it helped🎉❤😊

[@phuonganh6445]

tôi không thể gắn cảm biến siêu âm của mình vừa với file của bạn nó dài hơn 2mm

[@3DELWORLD]

Which ultrasonic part (model number) do you have ?

[@phuonganh6445]

@@3DELWORLD That is HC-SR04

[@phuonganh6445]

​@@3DELWORLD I edited the stl with SolidWorks and it worked, thank you very much

[@3DELWORLD]

Good to hear 😊 Enjoy!

[@JavierPavónAlonso]

Hi, how much RPM have the N20 motors?

[@sirwandzhwar]

100rpm

[@geimarygonzalezpino9953]

Cuáles son los materiales??