3D PROONTED CURSED GUN IMAGES

[@BrandonHerrera]

Thanks for watching guys! Sadly this is the last video I will film in this office, but only because I’m moving to a new better studio in Texas! I’ll see you guys there 🔥 Link to the Pop D-Bag: www.thebigdbag.com/pop/ Twitch: twitch.tv/therealbrandonherrera

[@theoneandonlygamer3224]

I love you man. You inspire me so much.

[@jemken8201]

See ya there!

[@memedealer367]

E

[@jackpeters2354]

Hi Brandon

[@emiliopadilla8287]

#akgnotificationgang

[@aaronlaplace5902]

This is the most terrifying episode because you can’t just say “it’s a photoshop don’t worry”

[@dummythicc7677]

I'm worrying

[@necrodudeqwhale5558]

@@dummythicc7677 *GOOD*

[@chrish3274]

Therapist: These 3D printed guns aren't real. They can't hurt you. 3D printed guns:

[@EdyAlbertoMSGT3]

It's 3D Photoshop don't worry

[@andy56duky]

​@EdyAlbertoMSGT3 3D photoshop:

[@STRAKAZulu]

Kel-Tec R&D: *rails line of coke* “TAKE FUCKING NOTES, MAN!” #akgnotificationsquad

[@Democrab]

yes

[@NEEDbacon]

I mean, my take away from this is if they start making dildo's that fires, they'll sell like gangbusters. Kel-Tec X Bad Dragon when?

[@AleksWorkshop]

pretty much lego at this point

[@isaacbuller8838]

dont give em ideas...

[@renatoimperatori5289]

it always has been

[@janetweed]

Ars AR platform are lego More like playdough

[@marquez4497]

There’s actually a video on a lego AR lower and it works

[@2007Shockwave]

@@marquez4497 Beat me to it! That is a wtf build, but amazing.

[@cerjmedia]

The fact that that dude called it the Skeet Cannon and not the "Glock and Balls" is the biggest crime against humanity

[@joeymctavish5130]

Zaza zozo poo poo

[@joeymctavish5130]

You just made the biggest mistake of your lousy career)!

[@CordovanSplotchVT]

Glock and Ball Torture.

[@dylanc2806]

LMAO

[@NeoIsrafil]

I don't remember if the skeet cannon was a Glock or not...wouldn't want to misname it... But yah Glock and balls is pretty good 😂

[@Mrgunsngear]

ball stock FTW

[@gilgaming8417]

Ball stock or no stock

[@beargillium2369]

Good fer throwin

[@Shadowlogic420]

Will totally start printing these.

[@liamflanagan490]

"Do it! You won't! No balls!" Are you sure about that?

[@beargillium2369]

@@Shadowlogic420 grossss... I guess if you want a thick peen as your foregrip... Not really into THAT personally...

[@Close2Cool]

"Do you want f*cking GPS coordinates?" ATF: Yes

[@THESLlCK]

Oh shoot

[@SaltineChips]

@@THESLlCK No shoot, that's the point of the ATF

[@THESLlCK]

@@SaltineChips unless there's a dog

[@kruemel534]

they gotta get in line

[@tobythethird5694]

Hmmm

[@reyvan3261]

I love that he has a computer right in front of him but he uses his phone

[@BrandonHerrera]

Real boomer hours

[@ATankEnjoyer]

@@connorgray8803 I see a mobrez, a SVT, but not an sks.

[@sadsuitcase]

Flex at the finest

[@aholyspaniel9624]

A smaller screen minimizes the pain

[@marcabreu5662]

😂

[@mosesturner4018]

One reason we "skeletonize" 3D printed parts is that it can take much less time to print and yet have similar strength. Very worthwhile thing to do, especially if you're making like 30-40 iterations.

[@nolanturner5607]

Yes, but we're talking about explosive forces here. That 1 might get away with the mag well, but in most cases those parts will most likely need to be solid to withstand and contain the blast.

[@MrFiscality]

Topological optimalisation sucks in 3D printing. Just overdesign it and FOS time 5 the damn thing. You'll be fine even with PLA.

[@roffelzrack]

Still funny when he said it was so god damn fucking heavy

[@trashman835]

Save filament

[@henrysokol3466]

@@trashman835 I'm no gunsmith or 3D-printer expert, but I am a builder of sorts. Skimping on quality materials and/or gathering it from old or patchwork stock is usually a bad idea, as is minimizing the redundant structure available to handle stress. This is especially true when the resulting work has to endure sudden shocks regularly. It shouldn't be done unless truly necessary, given that other 3D-printing factors might make the gun a bit delicate anyway. They should just *not build the damned thing* until they can do it the right way.

[@deltavictor8369]

"No instructions, use, etc., so this is completely advertiser friendly!" Queue 3D-printed gentlemen's sausages.

[@thefactory7221]

hey, they let bootleg tinder ads on their site, what's one artistic rendition of a man slab?

[@STRAKAZulu]

@@thefactory7221 more like three, but who’s counting?🤣🤣

[@kiwisontoast]

“We are back with another episode.. of cursed gun images.... yay...” *v i s i b l e p a i n*

[@ravenatort]

"I want to get off Mr. Bone's Wild Ride." The dude who made the scorpion ball sack stock: *"The ride never ends."*

[@evanbradley6169]

You mean the ballstock?

[@sovietred7371]

It is in constant loop

[@Sermienterpintor]

How would you rate this attraction?

[@JG_Wentworth]

Kinda interesting to think that the man who created the AK lived almost long enough to see advancements in technology so great, his legendary weaponry could be made almost (if not ENTIRELY) of plastic, and in the comfort of your own home no less.

[@MillerMachineWorks]

Until someone builds a kalashnicock then he rolls over

[@zacmeec3114]

Brandon Herrera "We're moving to Texas" *Massive record shattering snow storm hits* Me "These two things are connected proving Brandon Herrera is a harbinger of disaster and misfortune

[@berserkingbear3393]

YOU TAKE THAT BACK

[@berserkingbear3393]

@Theodore Corkrean you take that back too

[@crusader2718]

Jschlatt also moved there just before the storm so who really did it

[@fromtheshadows6268]

@@crusader2718 both

[@tony_fanta]

@@crusader2718 they were 69-ing the bad luck energy, so the snowstorm doubled the max. bad luck energy of only one of them

[@shrimuyopa8117]

Kel-Tec engineers and designers are watching this video and taking notes.

[@Ratkill9000]

As well as Hi-Point

[@ivankrylov6270]

Me too tbh...

[@ChucksSEADnDEAD]

They're too busy with the hourly cocaine bumps.

[@philliptrucker7883]

At Kel tec they call group drug use safety meetings

[@kormityourboyyy491]

Brandon: Sees cursed gun images Brandon's liver: My time has come

[@westtexastll1978]

Also Brandon's liver: "Brandon's Kidneys! HELP! I'm pickled & he can't reach the stop video button!!!"

[@RJJR-uy8hl]

@@westtexastll1978 nice one

[@ryanjd93]

I'm sure this has been said a million times already, but yes, Heritage Mfg makes a 16" barrel .22lr revolver, which is what people are using on those stocked carbine prints. Ask me how I know.

[@Nico42048]

How do you know?

[@ryanjd93]

@@Nico42048 It was rhetorical. Lol. How do you think I know?

[@unicorns1393]

@@Nico42048 I guess we’ll never know

[@BeetleBuns]

I was basically foaming at the mouth trying to choke him through the screen

[@cjmiller4635]

Lemme get those files bro

[@towakin7718]

13:50 ATF: "No, a ballsack is not a stock." Historians in the future: "And thus, ever since 2021, the ballsack was the prevalent form of stock."

[@prettyboyjeremy]

Alternate history: The battle of 2025 the guerrilla warfare personal are often seen using it ballsack stock due to the landmark court case where the ATF we’re reportedly “Laughed out of the court room” The guerrillas made several upgrades to the ballsack stock including additional ammo storage and sidearm carrying for each side The hastily made flag “Don’t touch my nuts” is still flying to this day

[@grqfes]

same with the tac-sac not being a foregrip

[@Bacteriophagebs]

If only people knew more about guns and put cheek rests on their firearms (thus making it legally neither a rifle nor a pistol, but a "firearm" under ATF rules) they could 3-D print penis cheek rests. Missed opportunity.

[@archerymidnight3422]

Implying they won't change their mind at random. I remember back when the ATF considered shoelaces to be machine guns lmao

[@thefiresworddragon927]

Pretty much. Whatever the ATF don't support is good automatically, they're that bad.

[@royrogers3624]

The 3d printed sack case would be the only court case you would be buying tickets to watch

[@theapexsurvivor9538]

What about the "Ultimate Finish" fleshlite stock?

[@royrogers3624]

@@theapexsurvivor9538 sounds like something from mortal combat

[@dustinmeier9753]

@@royrogers3624 Unfortunately, the Fleshlite is a thing. Someone went there. There was a video (I think Brandon did it) of the lawyer's letter to the AFT for clarification, just to force them to use the word "Fleshlite" in a formal communication.

[@royrogers3624]

@@dustinmeier9753 yes I know though I wouldnt say unfortunately just imagine the discomfort of the atf agent who had to make that repmy

[@Lord_GhostBoner_]

Fuck buying tickets for that, you can just walk in free. Hell, put it at a goddamn stadium

[@Jn42318]

"Fuck this dystopia" - 3d printed gun enthusiast

[@loud4life920]

Wait the guy is 3d printed?

[@Jn42318]

@@loud4life920 Ya for sure

[@josephsagotti8786]

@@loud4life920 always has been

[@toddhoward3846]

Good ol' JStark

[@marleyjr00]

I love that guy.

[@net-twin-de]

A tip to everyone who tries 3D printing such things like gun parts etc.. I would rather advise against PLA and PLA +, of course it works in a pinch, but there are far more stable and temperature-resistant filaments available which is used in mechanical engineering and can also be used with normal 3D printers. Use the normal PLA for practice and then use something like: "Nylon CF15 Carbon" - High strength - High thermal resistance - High chemical resistance - Impact resistant

[@mbarricelliwv]

PLA+ is the standard for low price, strength and printability above basic PLA, when you move up to nylon or carbon fiber filaments you need more than just a printer and time to calibrate your printer.

[@net-twin-de]

@@mbarricelliwv I don't think you need an extra new printer for this, but you might have to replace / upgrade the heating head and the nozzle and as you said - a new calibration too.

[@mbarricelliwv]

@@net-twin-de not a new printer, you need MORE than a printer, like a filament dryer and enclosure for the printer

[@net-twin-de]

@@mbarricelliwv It always depends on which printer you work with or which one you bought. There are very well printers with which you can use different types of filament. But yes, you're right, an enclosure would certainly make sense - I assumed that most of them have probably already bought one, I mean who wants to constantly smell the stench or hear the annoying fan noise. So if you work without an enclosure, I advise you to use one too. Almost all types of filament are susceptible to moisture. But that doesn't mean that you have to buy a filament dryer right away. Arguably the easiest and most common way to dry your filament is to place it in the oven. Set the temperature just below the glass transition temperature of the plastic and let it sit in the oven for 4-6 hours to allow the moisture to escape. The longer you leave it in, the drier it gets. PLA: ~40-45°C ABS: ~80°C Nylon: ~80°C

[@Killso420]

Every gun I have printed is in PLA+, if you know what you are doing, you will NOT have problems with quality

[@onetruedodd]

“What’s the first thing you’d do with a 3D printer?” ... Me: Buenos DIAS, amigos!

[@kansaspartan7625]

Bottle openers are so cool lols

[@sootymode3453]

You know what Buenos dias means?

[@somewhitedude01]

@@sootymode3453 do you 🤣😂

[@sootymode3453]

@@somewhitedude01 ya

[@Tinhead426]

It roughly means: Good day

[@thehunter3889]

Me then: “GET THE KALASHNIBREN DONE” Me now: “HE GOT THE KALASHNABREN DONE!”

[@Strangebyrd]

Doveryay, no proveryay.

[@joekurtz8303]

You can Always go to Peshawar and get schooled in primitive gunsmithing that can actually make your Frankengun fantasy in actual steel.

[@thesmallestminorityisthein4045]

Kalashnibren, or a mag-fed PKM-Lite

[@nicholashomler1494]

The skeletonized is not for weight, they were running out of media.

[@rahkshifan99]

Quanitity over...volume!

[@nicholashomler1494]

@@rahkshifan99 unless I'm mistaken volume is a measurement of quantity. Quality over quantity?

[@rahkshifan99]

@@Jtzkb ✔💯

[@gayu959]

A gu n that blows up on the last shot

[@madalheidis]

"God is dead, and you have killed him." Well, evangelicals claim I can, so I decided to try it out.

[@Lord_GhostBoner_]

What in fuck do you mean? I’m right here and I’m breathi- who the fuck are you? WHAT THE HELL IS THAT?! WHY THE HELL IS THAT???!!! [gets shot] WHAT THE HELL IS GOING ON?????!!!!!

[@nolanoshoney8685]

8:36 Brandon missed the opportunity of a lifetime to call it a cock 19

[@That_One_Guy_In_A_Band]

Or the "Glock and Balls"

[@Silicat1]

@@That_One_Guy_In_A_Band or “glock and ball torture”

[@That_One_Guy_In_A_Band]

@@Silicat1 Fuck, that's even better. Damn.

[@RandomLeech744]

He's pulling his glock out!

[@christiankirby8092]

@Paul Martin Cocked* up

[@mtnbkr5478]

The best thing about 3D printing is that people can just draw something on the computer, press a button, and bring their ideas into reality, but the worst thing about 3D printing is that people think that they can just draw something on the computer, press a button, and bring their ideas into reality.

[@JohnnyYeTaecanUktena]

Trust me do not 3d print your waifu's or secret gun hiding compartments disguised as them as you would have a lot of explaining to do. I can already think of what horrific things a gun loving weeb would do and these are things that can scare you more than what Brandon has seen in his cursed gun images that he usually puts as the last one he looks at. Trust me the ideas would be cursed indeed but impressive for all the wrong reasons especially since a thing called physics gets in the way a lot

[@danielaramburo7648]

I hope no one 3D prints a 50 BMG rifle. It would become a grenade.

[@jewberryquiche8664]

@@danielaramburo7648 I hope someone 3D prints a 50 BMG rifle. It would become a grenade.

[@rocket_sensha4337]

@@JohnnyYeTaecanUktena quoting death battle: for sex and murder.

[@Tunkkis]

@@danielaramburo7648 A guy called SuckBoyTony is working on a couple of proprietary .50 cal gats. Check out his Twitter, it's pretty interesting.

[@mortifiedpenguin5895]

Brandon: does cursed gun images and hates himself Brandon: at least im monetized- KZbin: demonetized Brandon: well fuck me #AKGNotificationSquad

[@mitchellanderson3960]

Kinda like KZbin doesn't abide by its own rules...

[@westtexastll1978]

@@mitchellanderson3960 yeah, KZbin was the one who submitted that last one with the White Claw "can" on the end!!! 😲 Betcha didn't see THAT $#¡+ coming!!! 🤣🤣🤣 🤔🕵🏻‍♂️... Y'all see what I did there?¿? 🤭

[@brandoneller6037]

7:08 *slowly removes jet engine and wings from bull dozer*

[@notgonnalie4410]

The ride never ends! The ride never ends! The ride never ends! The ride never ends! The ride never ends! The ride never ends! The ride never ends! The ride never ends! The ride never ends! The ride never ends! The ride never ends! The ride never ends!

[@thismans1405]

*I want to get off Mr. Bones' wild ride*

[@owenwildt409]

@@thismans1405 the ride never ends

[@bighead7595]

The ride never ends

[@vamp576]

I want to get off MR BONES WILD RIDE

[@notgonnalie4410]

@@vamp576 THE RIDE! NEVER! ENDS!

[@adamellison7101]

Government: *passes HR 127* Me: “haha 3D printer go brrrrr” #akgnotificationsquad

[@evanf1443]

We need to be working on how to 3-D print ammunition too. They’re trying to regulate that in there too.

[@isaackolman2861]

@@evanf1443 regulate the politicians

[@adamellison7101]

@@isaackolman2861 I think you misspelled guillotine

[@TurboScepturrr64]

WAIT IT GOT PASSED???????????

[@evanf1443]

@@TurboScepturrr64 not yet that I’m aware of. And it’ll get taken to court immediately if it does. One could easily make a case that this bill disproportionately harms minorities or lower/working class citizens.

[@Retrofins]

This video in a nutshell: "omg, that's disgusting, where?"

[@greekhuman8706]

Lol yeah pretty much everyones reaction when they hear you can 3d print a gun

[@westtexastll1978]

NO 🤦🏻‍♂️! Not 🥜🐚... ⚾🛍️!

[@anonymouslee2083]

8:26 when that guy said "hold on, I need to cock my Glock real quick," I thought he meant something completely different.

[@zacharyberkowitz767]

Cursed gun idea that I can easily image in my head: Glockarov. 50% Glock, 50% Makarov, 1000% cursed

[@rifleoperator5567]

cursed cancer you shall say

[@Sethrod8]

I immediately projectile vomited when i pictured that

[@kaydencebernard7775]

Yo dat shit just made all the THC escape my body in one breath and glocks are hard to get in canada

[@jameshebert1214]

I cannot express my hatred towards you in words.....only in war crimes *racks AK-50*

[@Attaxalotl]

no.

[@AJSSPACEPLACE]

When I hear “3D printed parts” I only imagine one thing. A grip, that’s perfectly formed to my hand

[@Molloy244]

Might explain why some seem to have a "fetish"

[@Lord_GhostBoner_]

I’m think either a perfect mold to fit your hand or you wish to have it printed AROUND YOUR HAND

[@omegawilliam95s36]

A grip that IS your hand.

[@grqfes]

how do you scan your hand though

[@DeathDealer_1021]

@@grqfes 3d scanners do exist

[@carryhandleenjoyer7411]

This is exactly what I need to start my morning

[@ExtraSpicyRice]

Ah it’s noon where I live.

[@sebastiend.5335]

It's early evening where I live! ;)

[@Awesomeguy-kr8kv]

Why do you start your morning at 12:14

[@Awesomeguy-kr8kv]

Wait, time zones sry

[@realjohnmcaffe6950]

You and me both

[@roguespearsf]

He took the narwhal tusk from a display at a nautical exhibit of some sort that I believe was located on or next to the bridge. Pretty badass

[@roguespearsf]

Oh and they made the guy who stabbed the terrorist go through deradicalization training, can't make this stuff up

[@username_loading_error]

Brandon: whatever is left of the monetization on this KZbin: monetization my ass you get none

[@wags1189]

Probably the skeet shooting glock and the skorpenis did it

[@TeamBuffaloOutdoors]

Profanity scientifically is more efficient at getting your point across. That would be a violation of his 1A rights

[@username_loading_error]

@@wags1189 it should’ve been a Saiga-12 because it would’ve put the sausage in sausage cannon

[@mjolnirswrath23]

@@TeamBuffaloOutdoors yeah and Shall not be Infringed! Is pretty clear and cut too... But leftists are stupid...

[@VompoVompatti]

As the saying goes: "Just because you can doesn't mean you should"

[@liam3044]

I'll politely disagree.

[@Bicbawsaq]

Just bc you shouldn't doesn't mean you can't

[@lanefunai4714]

If everyone 3d printed a bullpup would you

[@NikolajKalashnikov47]

The guy who has to review this video is probably like: "He does not show how to print a gun, so it's advertizer friendly... Wait, did he just drink alcohol?! Oh my god, he said 'fuck', delete his disgusting channel! No way, he showed a Glock that looks like a Johnson, FBI, DEA, ISIS, storm his place right now!"

[@noahkohlmann5391]

I'd love to see a video of him taking a look at how far 3d printed guns have come

[@dylanc2806]

the youtube gods would not like this

[@H2ORaccoon]

The notif gang WILL rise

[@liam3044]

We are here.

[@swypersgarage2561]

Yeee

[@JohnSinatra88]

Nerf or nothing

[@screwgle7914]

im printing a hi-point, because they are too expensive.

[@Psykomancer]

And too reliable.

[@ProfessorYana]

Brandon: "I want to get off Mr. Bones' Wild Ride." The ride never ends. You should know this by now.

[@robertsummers3386]

There are two people in this world. The ones who go "BRO, WTF AM I LOOKIN' AT!?", and the ones who laugh at the reaction to the cursed weapon of hentai AND war.

[@guccimain89]

“We fully complied with advertiser friendly guidelines” Meanwhile, advertiser is advertising a vibrating Bluetooth sex toy before this video.

[@tanjeeschuan4999]

Ads are based on your internet activity, hmmm

[@arby627]

I got rick rolled by an ad once

[@slavicguy8687]

What have you been watching 🤔

[@MaxiTheManiac]

Get off the soy bud

[@Sp00kq]

Ads are based off your YT and Google searches yknow? What you been watching? Ctrl Shift N my guy

[@rolo-royce-6626]

That “oh” when he saw the Garfield rear sight was just so hopeless....what are we doing to this poor man?

[@not_herobrine3752]

has he seen the pic of the irl anti sight

[@narodwpsanialy1940]

@@not_herobrine3752 Idk but it dosen't even compare to Garfield's Rear sight.

[@anotherperson5175]

Brandon: "Promises made, promises kept." Ak50: :(

[@uncleacid6973]

He made one

[@anotherperson5175]

@@uncleacid6973 It was a w.i.p. And I'm pretty sure its supposed to get to manufacturing.

[@jonnycarcano]

The Blyat Gat is nigh.

[@hellohelloington5952]

"Heaven, not skyscrapers - you know what I meant." you're 20 years late.

[@teutonicknight23]

Brandon: “advertiser friendly guidelines” KZbin: “Are you sure about that?”

[@lancejensen9750]

Me: I should hang out with other gun owners more often. Brandon: Makes any video Me: Maybe I'll just keep going to the range alone...

[@kaptainkoffee5504]

“They were so excited by the idea that they COULD... they never stopped to think, if they SHOULD.”

[@aylam9667]

Uuuhh I see uuh what you aauuughhh did there.

[@BUZZKILLJRJR]

Bahaha

[@lv7629]

of corse they should

[@randominternetprofile8270]

Those revolvers could be legal. Heritage makes a 16” Rough Rider.

[@Uunnoowwnn]

"Got a kid on the way, I kinda wanna print one" Brandon is gonna give a printed tec-9 to his kid

[@huntercanady6001]

He said kit on the way

[@Uunnoowwnn]

@@huntercanady6001 I know dude, I'm just playing

[@samuelsocha8384]

also that was a mac-10 or 11, not a tec-9

[@abrisgarancsi5535]

I misheard it,so thank you for clarifying that it's a kit.

[@allanbranson]

I totally had to rewind to get “kit” out of it as well.

[@sgtwolf1143]

"I want to get off Mr. Bones' wild ride" T H E R I D E N E V E R E N D S

[@fadeintoyou5341]

BEST REFERENCE

[@AlexHarris9037]

Brandon: "Quit asking about the Kalashnabren!" Throwing a lot of shade towards all of us supporting your White Claw and gun meme habits 🙄 #akgnotificationsquad

[@daqpanda]

Patience. Doing dumb yet neat things with guns takes time. Would you rather a bubba'd piece of junk, or something half decent?

[@volatilegaming5852]

I feel like the worst part of the groza 3d print is that you're putting plastic with a lower melting temp directly over your barrel.

[@YerGoodBuddyKeith]

"Heat treated 80 receivers and rivet presses aren't that expensive" yeah but where can I get a parts kit that's not garbage for a arm and a leg.

[@michaelminter1337]

And I live in Australia.

[@BrandonHerrera]

You still need a parts kit for a Plastikov 🧐

[@YerGoodBuddyKeith]

I was just making a funny about how there isn't that many parts kits available and they've jumped in price by alot.

[@NC_Fisher_Guy]

@@BrandonHerrera I'm gonna be sad that I won't have a chance of running into you at some point. At the time you see this comment, you will probably be in Texas. I live about 45 minutes from Fayetteville so at least I had a slim chance of running into you. You were the one KZbinr who lived/had a business near me. So yeah... Hope you found a nice house in Texas

[@camostrike4395]

@@BrandonHerrera y did I read that in a Russian accent

[@tylerwest4756]

I just woke up from an alcohol fueled slumber in which I had a dream that I had a pistol case that I was taking apart. Yes, a pistol case. It encased the pistol like a phone case. Why? I don’t know. . I believe it was on a P227. In my dream I was questioning the point while trying to take it apart. The case was held together by 200 or so tiny screws in multiple random locations. It got worse as for when I got finished I figured out I had taken it apart in a hotel lobby and now had a gun and a huge mess sitting on the floor. Since nobody had noticed somehow I hastily picked everything up and carried it into my room which was on the same floor as the lobby apparently. Upon trying to put it back together I found out that I had lost half of the screws and I woke up still freaking out. My first instinct is to comment this on a Brandon Herrera video because when Elon musk takes me away for the vision I wasn’t supposed to see, the world must know and I felt this comment section would understand.

[@dooderbug2437]

Same dream but obrez

[@cheshire4856]

@DomesticPenguin Yes, somehow, some way, somewhy, we do.

[@Si_Sireeni]

Can someone explain the significant of an obrez instead of the Sig?

[@redtomatu9719]

I would say we’re sorry for the torture we put you through. *But we’re not.*

[@antkoz6370]

kzbin.info/www/bejne/qqm4lImKnLJoi5o

[@Sammm107]

Man your jokes hit. As a millennial I think your meme references are hilarious

[@willkroll8094]

A cursed gun images that’s longer than 7 minutes??

[@lieutenantrouter3999]

The alcohol really must have helped

[@drunkengibberish1143]

Rule of thumb for 3D printing: skeletonize everything. The money you save will pay for your medical bills.

[@marlondeanbellot.7945]

Ha! Ha! Ha! Is this sarcasm? Yep I think so. Awesome .... and a great WARNING!!

[@Aolsucs]

@@marlondeanbellot.7945 I don't think it's that much sarcasm. Really though, even if not for money, having everything be skeletonized can save SO MUCH time.

[@szxcrab7782]

I might be stupid but what does skeletonized mean

[@Aolsucs]

@@szxcrab7782 to be released from your flesh jacket Or in this case it's hollowing out the surfaces as to use a little material as possible while trying to maintain structural integrity.

[@mjolnirswrath23]

@@szxcrab7782 some Dumbasses think that Adding holes in their Firearm. Makes it lighter However that's also just more points for dust and debris to enter...

[@thegeneralissimo470]

“Do you want GPS coordinates” Yes. Yes we do.

[@isaiahmiller9142]

Not today, Fed boi

[@the_gaming_rabbit8017]

Heritage makes a single action .22 revolver with a 16 inch barrel and that's what those long bois are

[@PartTimeGoblinSlayer]

ATF: you can't have AR's. 3D printers: makes almost everything into an AR. That said I would actually like to see a hipoint based off the halo magnum with the hand/trigger guard just for giggles.

[@awesomechainsaw]

Wouldn’t it be easier to do that with a Deagle? It has an upper and lower rail that you could attach prop parts to. As well as your Magnum copy can now live up to the name.

[@desertedgoatgaming]

There's people doing stuff like that already, I think so far they have the assault rifle and someone is working on the smg.

[@swampdonkey1567]

@@awesomechainsaw no Deagals are expensive.

[@jacobdavid2475]

Someone made the halo magnum based on a Glock, it's pretty sick

[@connermorse4651]

It's funny how even after that disclaimer there are zero f*cking ads.

[@yumekojabami3231]

I'm starting to wonder if he even monetizes them or he's just ad banned

[@username_loading_error]

He got demonetized

[@FireSpectre_]

@@username_loading_error why not both? 😂

[@thecornconquerer4947]

If Brandon ever dies, I’m envisioning cursed 21 gun salutes all over the country

[@tyrusvanciel2248]

Underated comment

[@STRAKAZulu]

All-Bullpup 21 Gun Salute. Made of Bubba’d AK’s and SKS’s.

[@Fresh_Baklava]

That Skeet Cannon made me laugh my ass off!! 😂😂😂

[@dirtracingfan8742]

Goes into a rant trying to stay ad friendly, 30 seconds later used term “window lickers” lol

[@christopherriley2406]

The defeat in your eyes when the cursed guns come out is priceless.

[@sportbrand1171]

Those revolvers are 16" rough rider from heritage manufacturing inc

[@presidentjohnhenryeden9450]

THE RIDE NEVER ENDS-

[@ammonjudson4006]

"What you want GPS coordinates?" Yes actually.

[@tritonalabaster6269]

Everyone's talking about the ak-50, the Kalashni-Bren. Im still wondering if he's still trying to find a good bulldozer for the Killdozer #akgnotificationsquad

[@samsononyt]

He earned my like when he said “limquor”

[@Crystalcluster]

btw many of these skeletonized 3d printed parts are skeletonized bc they take rly long to print. And if you use less material its not gonna take as long as if you print it massively

[@ivefallenandicantgetup7950]

"Time to make me hate myself." I can't start hating myself if I already hate myself I am immune

[@edwardbarton1680]

I'm surprised you didn't mention the weirdo that 3d-printed a picatinny-mounted "tactical bean holder"...

[@BacklTrack]

Only for use in movie theaters

[@jonathoncoward2210]

that's for tactical slight of hand reloading a can cannon

[@evanraindubose9703]

Brandon:I don't want to get into politics. Also Brandon: *wear's don't tread on me shirt*

[@travisdavis316]

Dont tread on me isnt political just like the come and take it flag

[@marrqi7wini54]

@@oceanbreeze1162 The flag and phrase has been around for nearly 250 years. The TEA party just use it a whole bunch.

[@lysanamcmillan7972]

@@travisdavis316 Both of those are political. "Come and take it" is aimed at politicians who are seen as gun grabbers. The Gadsden/don't tread on me was born a political flag because of its use during the Revolutionary War as a protest against British rule. Now, not only did the TEA party use it a lot, it was popular in the crowds at the Jan 6 insurrection riots in DC along with the VA Traitors' Battle Saltire.

[@waltuh11121]

I'm not from the USA but for what I have read it has been used so much by everyone that it doesn't even mean anything anymore

[@dontkickmychick6076]

@Panzerjäger Nashorn first it was used unironically, then people used it ironically to make fun of those people, then they made don't step on snek but then THAT started getting used unironically as just a memier more casual version, it's a bit of a mess

[@kalebross8795]

The skeleton grip and honeycomb lower on plastic is hilarious

[@no1bandfan]

My expectations: 10% of what’s actually in the title. 60% WHERE’S THE AK50! 30% Kel Tec memes.

[@angelodemons6029]

“Before I move to texas” me yells out loud “HELL YA”

[@DNulrammah]

"...I tell you H'wat".

[@1homeboy815]

Brandon: hey youtube we are doing everything by the book KZbin: o well demonitized video.

[@chankanyy924]

Nah I see couple ads

[@1homeboy815]

@@chankanyy924 there wasn't any when I watched it

[@williamsencer2040]

Broskie treats his camera guys very well lmao

[@jackwolfe8206]

"Excentric window lickers" is my new favorite insult.

[@kmech3rd]

"Don't Tread" and "Molon Labe" seem like asking for unwanted attention these days. The head potato in chief seems like he might be inclined to use that as an invitation rather than a warning. Senile and cranky with tons of Alphabet bois behind you is a bad combo.

[@ivanfromtheeast4709]

Yeah plus they worship him

[@Avallachgrey]

If it helps I work for one of those alphabet groups and I loath him.

[@jonkR96]

You’ll be labeled a “danger to the community” and Fed bois will kick in your door. People should stop posting images of their “babies” online, especially Facepalm and dimwitter.

[@manictiger]

@@jonkR96 So many dogs will die this year.

[@GeraltofRivia22]

@@Avallachgrey not for much longer

[@letsgoexperiments7577]

Me: “Can we buy some guns?” “No, we have guns at home” Guns at home:

[@GlowingCharm]

I feel like I would love to see him go through destiny's guns because a lot of them look pretty damn cursed and if you're worried about the amount how about just the exotics

[@finncampbell6524]

Truly disgusting, that some “people” would do such a horrible thing.

[@minekraftgamertom5587]

wrong channel bub

[@naffal1538]

lmao nice

[@karelpgbr]

Good try, but wrong channel...

[@deradi2233]

@@minekraftgamertom5587 what is the right channel?

[@minekraftgamertom5587]

@@deradi2233 it was a crappy jschlatt joke

[@ingodwerustt]

Me: *sees Scorpenis* "That's the most ridiculous thing I've ever seen." Also me: "I wonder if I could do this with an AR."

[@20tigerpaw20]

do it with a AK

[@fuckinantipope5511]

@@20tigerpaw20 and send it to Brandon

[@OspreyKnight]

Whatever you can dream can be made real! With 3d printing! *nightmares included

[@TheSniperFox]

Sexual Assault Rifle

[@donniebaynard8430]

LOLOLOLOL! Love this whole video! From the Johnny Walker blue, to the honeycomb lower!!!

[@five5105]

A guy I know made the Garfield 'rear' sight, and trust me when I say that's not the worst he's done.

[@b33fy89]

Inform me or link his stuff, I'm intrigued

[@elijahaitaok8624]

Are there anime girl ‘rear’ sights available?

[@five5105]

@@elijahaitaok8624 well, the garfield one is 3d printed, so i'm sure you could make it real

[@FrankDad]

Brandon: Moves to Texas Also Brandon: Brings weather with him and brings Texas to its knees

[@mattelder1971]

The hex cut lower was actually designed by a friend of mine. The magwell is the ONLY thing that has those cuts, and it is perfectly fine to have them there. The magwell doesn't take any significant stress in these designs. All of the critical areas of that lower ARE well reinforced.

[@dam-di3431]

11:48 this made me laugh so hard

[@TheArklyte]

Hope to see an episode on various "emergency guns" made over history. Some of them were dumb, some were quite good ideas(STEN).

[@dropdead234]

Like the tree stump cannon?

[@JesterMasque]

KZbin: "11 seconds ago" Comments: 248

[@IncrediPaulAZ]

Lol yeah the first 100 are people saying "first" 😂

[@AG-zv9jo]

When you realize one day that Brandon will finish projects like the AK-50 and Plastikov Oh sh*t, lemme set my timer for that one to. . . ♾

[@onelastdawn9991]

There is another

[@M3rcyKn1ght]

cant help but notice your ak in the background has the same or a similar gun butt to what mine has. beautiful rifle