Amei o vídeo, utilizei no meu trabalho de conclusão da faculdade! Obrigado
@3DBeast3 жыл бұрын
I am very pleased to hear.
@nataala_10 ай бұрын
Thank you very much.
@FrikkEdits Жыл бұрын
Great video, thank you very much!:) If I want to wrap this facade around the whole box (all four walls), how would I do this? I tried to «set one crv» to a 2D square I drew instead but some of the walls then got inverted sadly..
@ValeriaPaezCala10 ай бұрын
great video
@alijaja89092 жыл бұрын
i try it and i do every step like you its very helpfil thank you but the louvres are rotated i tried to fixed it but didnt work
@3DBeast2 жыл бұрын
Rotate the base curve (at the beginning ) and see what affect Or send ur script tridbeat@gmail.com
@ebrahimmofakheri31902 жыл бұрын
its wonderful !! how can I apply this parameters in curves models? please help me
@3DBeast2 жыл бұрын
sry i did't get what ur looking for
@maxwellallen53782 жыл бұрын
Hello, I am a third year architecture student who is new to rhino. I am following along with your tutorial however I am trying to rotate the panels perpendicular to a curved surface. I have managed to create perp planes along the bottom curve however I am not sure how to rotate the panels to be oriented along the perp planes. If you are able to explain this to me that would be greatly appreciated. Great tutorial so far!
@3DBeast2 жыл бұрын
check this gh definition drive.google.com/uc?export=download&id=1zHB3Ktv6EOUXxrkBw0EcfldNqKuFigsS
@kyannezhang68764 жыл бұрын
love ur videos! I learn much from them! thank u so much! btw I wonder how u set up ur render mode? like every time when u click the "RE1" thing?
@3DBeast4 жыл бұрын
Thanks for your comment, nice to hear that you found it useful. u can download the viewport display mode here drive.google.com/file/d/1usitNVRx8b8vToWLDpYlpDYjQAgsXE3n/view?usp=sharing
@kyannezhang68764 жыл бұрын
@@3DBeast thx alot! keep going!
@camilac43082 жыл бұрын
Thank you, this tutorial is so helpful! Would it be possible to make a hole and have this wavy pattern following it? (like the tampere art museum)
@3DBeast2 жыл бұрын
yes possible but u need a different approach. eg u can use the hole boundaries as curve attractor and use sine graph to make the waves
@wg67 Жыл бұрын
와 미쳤넼ㅋㅋㅋㅋㅋ 이 사람이 진짜 찐이넼ㅋㅋㅋㅋㅋㅋㅋㅋ
@3DBeast Жыл бұрын
ㅋㅋㅋ
@pikapika48373 жыл бұрын
Hello what is the 1.021 you put in which got attached to construct domain I’m trying to make this model in a bigger scale but I’m having issues maybe I thought it was the numbers I’m using as I’m trying to make it 8000mm high and 18380mm wide if anyone can help would be amazing !
@Premkumar-np5tq4 жыл бұрын
live long my frnd....
@ihsanmaulana361 Жыл бұрын
can i make a hole in the middle of louver facade ?
@jjlupercio3 жыл бұрын
Great video! How would you put this code on a twisted surface instead of a flat one?
@3DBeast3 жыл бұрын
if ur surface is twisted in one direction all u need to do is 1st duplicate ur edge and use that curve to start 2nd offset ur curve that u get @ 10:45 to normal direction of ur lofted surface
@joaoarmentano86093 жыл бұрын
Hi, how to apply in an amoeba-shaped closed curve (looks like a circle) Thank you very much for your help!!!
@3DBeast3 жыл бұрын
to do that drow amoeba-shaped crv after that u can use attractors
@joaoarmentano86093 жыл бұрын
@@3DBeast I tried this, but the slats are only one way, they are not perpendicular to the curve
@3DBeast3 жыл бұрын
@@joaoarmentano8609 u can use surface normal direction to make them perpendicular, or send me ur script tridbeast@gmail.com i will take a look when i get time.
@joaoarmentano86093 жыл бұрын
@@3DBeast I just sent the email, thank you very much!
@moonstruck7732 жыл бұрын
@@joaoarmentano8609 Hello, did you get a solution for this? I have the same issue and couldn't find a way. Can you help me if possible?
@aluxluna60332 жыл бұрын
nice video friend, would it be possible to add some attractors?
@3DBeast2 жыл бұрын
Yes u can
@kibourin_archi_studio59254 жыл бұрын
Yes
@3DBeast4 жыл бұрын
;)
@edenshai82572 жыл бұрын
Hi! is it possible to send the Grasshopper script again? It doesn't seem to work from the drive
@3DBeast2 жыл бұрын
just enable preview on the last node
@abigailcrawford90143 жыл бұрын
would it be possible to generate this effect from a mesh?
@3DBeast3 жыл бұрын
Yes possible but u need to adjust different tings.
@肖飞-t6f3 жыл бұрын
谢谢老师指导
@3DBeast3 жыл бұрын
谢谢肖飞
@ebrahimmofakheri31902 жыл бұрын
and thanks again for links file🙏🙏🙏
@3DBeast2 жыл бұрын
You’re welcome Ebrahim , and thank you .
@肖飞-t6f3 жыл бұрын
How is the entity's point of control leveled(实体的控制点如何拍平)
@3DBeast3 жыл бұрын
don't understand what u want please explain more
@肖飞-t6f3 жыл бұрын
WeChat? AUTODESK-ALIAS Can you add me? or your WeChat tell me