Livestream Clip: Root + Fluidd on Creality K1C

Clip from a livestream where I unboxed the Creality K1C for the first time and wanted to make sure I have access to Fluidd. I had to do some thinking on the spot to remember my way around but ultimately just needed the commands from this link to get it done. Thanks Guilouz!
🛟 github.com/Gui...
------------------------------
IN THIS VIDEO:
--------------🔗--------------
🛟 Creality K1C: shrsl.com/4e3do
🛟 Creality PEO Print Surface: shrsl.com/4e3ri
🛟 Creality Carbon Print Surface: shrsl.com/4e3rh
🛟 NEW MERCH STORE: shop.3dprintsos...
------------------------------
DISCORD & PATREON:
--------------🛟--------------
🛟 NEW MERCH STORE: shop.3dprintso...
🛟 Join the 3DPrintSOS Discord Server: / discord
🛟 Become a Patron: / 3dprintsos
🛟 Buy me a coffee: ​​www.paypal.com...
------------------------------
CHANNEL LINKS & DISCOUNTS:
--------------🛍--------------
• 5% OFF - Everything from IIIDMAX using code "3DPRINTSOS":
bit.ly/iiidmax
• 5% OFF - Everything from HOTO Tools using code "3DPRINTSOS": hototools.com/...
------------------------------
DISCLAIMER:
--------------⚖️--------------
Some of the links above are Affiliate Links. They do NOT cost you anything but using them and making a purchase provides a tiny kickback for the channel. This is one way I can afford to continue to make content for this channel. Thank you for your consideration. :)

[@Gryfang451]

Hope you're feeling better! Was still at work and missed the stream.

[@Steve_Smith65]

I have mine on the way.. Im surprised there are no spare parts available at launch.. especially nozzles.. I noticed your coffee mug.. had to buy one.. waiting on delivery as well.. I hope its packed well..

[@Antoan108]

What slicer do you suggest for the k1c? I heard some people had problems with tpu on the creality slicer using the generic tpu setting.

[@3DPrintSOS]

I use Orca Slicer on my Creality machines. I will only use Creality Slicer for testing.

[@Antoan108]

@3DPrintSOS Okay, thanks. Does the k1c have problems with the default tpu pre-set on creality slicer? As I say a video about that.

[@3DRabbitHole]

Hey! What actions are necessary in Fluidd after future firmware updates? I rooted my K1Max when you release that video, but after that I updates the printer`s firmware. Tks as always friend

[@3DPrintSOS]

After you do an update on the machine, you have to get root access again via the printers menu. You should have access to fluidd right away after waiting the 30seconds and clicking ok. (Unless they just changed something)

[@3DRabbitHole]

@@3DPrintSOS tks!!!!

[@Outlaw.Woodworking]

is it possible to change the name of the fans in fluidd.. example: instead of FAN0.. I can change it to MODEL FAN

[@3DPrintSOS]

As long as the pin and fan type stay the same, I believe the name doesn't matter. :)

[@Outlaw.Woodworking]

@@3DPrintSOS I'm not comfortable messing around with the config files like that. Moreso just asking if it can be done and how

[@Milenko652]

Do you have anything specific for the Voxelab Aquila S3? I've been having massive issues with getting things to print right. I've tweaked all settings multiple times and just can't get it to work on anything.

[@3DPrintSOS]

Sadly, I do not. I never got a chance to get the machine in before my contact at voxelab left. The new contact said they didnt want to ship me any machines at this time. So, I havent covered them.

[@Milenko652]

Thank you for at least replying. Appreciate that . The hunt continues

[@noxspector]

Felling better?

[@3DPrintSOS]

A little but still in bed. :/. Thanks for asking!

[@costenalolek973]

Can this "Helper Script" also be installed on Ender 3 V3 KE?

[@3DPrintSOS]

Yep, it’ll work on the KE as well.

[@musacekic]

how do you fix the input shaper? I'm getting the printer tomorrow and could really use some help

[@johnh.miller1112]

I ordered four K1C’s from Amazon to replace my K1’s and was very disappointed. They still make ripples in parts and have problems laying down a proper first layer without adjusting “Z” height in expert mode. In my opinion they are just warmed over K1’s and the $549. price is not justified. I shipped them all back for a refund and will live my four lame K1’s. The hype is overrated. My 14 Bambu printers are far superior and Bambu’s engineering puts Creality’s to shame. No more overhyped Creality products for me. I also own a dozen Creality S1 Pros with Sonic pads that are collecting dust once I bought Bambu. The Bambu automatic flow calibration is also a game changer.

[@3DPrintSOS]

Bummed you had to go through that and thank you for your opinion and experience. I live a different world from you. All my dozens of machines are very different from each other. So, I dont get to see the side you see. So, I appreciate it. I would put the K1C up there amongst the best (currently) when comparing a bunch of different machines. Even 2nd or 3rd place out of hundreds is pretty amazing. You are lucky enough not only to be able to afford Bambu machines but also not mind their business practices or their ownership of your print files via the cloud. So, kudos to you. You are basically picking between Ferrari and Porsche and bad-mouthing the one you didn't like. Not bad if you ask me. :)

[@chopdoc11]

You must be a paid promoter for Creality. Voxelab Aquila has had the S3 and X3 out for over a year but since the S2, not a word on them from you. Thats fine, unsubscribed.

[@3DPrintSOS]

The company stole replying to my emails and when they did they said they had no more interest in providing machines for review. With so many others coming out, it was very easy to move on. Especially because the machines got more questionable. As for being paid by Creality, I guess you don’t watch my videos or livestreams. I don’t take payment for anything on the channel. I’m not tied to a single company. I make content on things I’m interested in. lots of other creators out there you’ll like more. appreciate your time while I had it. cya.