3GXV3-Futaba S Bus Receiver Connection

[@RotoRCol]

the fail safe works if I shut down the transmitter but not if I disconnect the sbus cable does the 3gx has an internal fail safe?

[@RotoRCol]

Hi Ron I have an sbus conecction with the 3gx and I activated the throttle fail safe in the transmitter, the power of the esc align 70 is connected to the THR channel of the 3gx, but the fail safe doesn t work if for example the sbus cable is disconected. What I have to do?. The manual said that connect the bind plug to the bind port of the 3gx but here is the sbus cable at the same time.

[@ronlund1953]

This is the actual hookup. The only variable is the power connection. The S.Bus cord carries all of the signal information from the 3 channel receiver to the 3GX. Wild, eh?

[@boldger13]

Are those empty spots open for anything or intentionally left open for the demonstration video. It looks like it has some "extra room."

[@heeder777]

I've got the same issue, receiver powers up fine, 3gx no response. Works fine connected with the standard reciever configuration. Futaba 14sgh w/7008 sb reciever.

[@ronlund1953]

I'm looking at this. Seems that some "SB" receivers don't work as well as others. What receiver are you using?

[@heinzfischer3743]

Hello. Don't plug in the SBUS into the S/B, pug it into S.BUS2