3M Assembly Solutions: Epoxy Adhesive Demonstrating Strength

[@e36fanatics]

holy shit that is some strong ass adhesive

[@Bunny-Power]

Is it still hanging? Must be a heck of a bill for that rental crane.

[@user-th6tc5un1s]

Tell me again how thick the layer of adhesive is.

[@robertrivasarroyo1174]

This epoxy is awesome!!!!! I used it to fill in some small imperfections in an aluminum parts inner walls, then machined it. Amazing stuff absolutely recommend it.

[@bigbong8165]

um, yes. I have this glue too, in China

[@01zakman]

MotionautoTV?

[@GokulGugale]

I want to apply on fastners in large quantity. Procedure to apply.

[@CB-bi1be]

Now let it hang until it actually decouples. How long will it last to failure? No need to lift over 1-2 inches for safety and budget reasons. I guess we were shown hour 18 because at 19 hours it will break free.

[@Todro101]

I was hoping find info on 3M 3501

[@Swansen03]

....just type "3M 3501" into a search engine, first link is = www.3m.com/3M/en_US/company-us/all-3m-products/~/3M-Scotch-Weld-Epoxy-Adhesive-DP3501/?N=5002385+3293242431&rt=rud

[@edbarry7291]

what about temperature way temp does it have be use on truck fenders

[@filipdopirak5226]

Yes that is static load but how about dinamic load?

[@dan79transam65]

Dynamic load would still be way more than what the work load rating on the packaging would be. No worries:)

[@bigbong8165]

Yes that is static load

[@ionutdimache9245]

Things got sticky here.

[@koobrunner9075]

How to remove

[@techmetal2292]

You don’t

[@hazelcruz6887]

Which onwe would be good for body kit for car? I dont want to drill holes in the car is there a 3m one specific for cars or fiberglass? Thanks.

[@18magicMARKer]

fiberglass body panel isn't fiberglass...its fiber glass re-enforced plastic...you'll have to findout why type of plastic your body kit is made of and find the right epoxy for that plastic.

[@sergiov.dominguez321]

Use 3m panel bonding 08115

[@nialldaly7108]

From a European and Irish point of view, why do use 14,550 lbs, why not use 6.5 Ton, you don't buy a car for 2,000,000 cents do you, you buy it for 20,000 Dollars/Euro or sterling, Lowest Common Multiple, learned at age 7-8 in school. Otherwise I like the Video. Thanks

[@SLP-eb1wp]

Go stand under it if you trust the product

[@ovalwingnut]

"Applied a thin layer" to the couplings?? Seriously? Thin? And the Titanic hit a ice cube 🙄

[@18magicMARKer]

when its spread out it's thin...i mean its holding 14k lbs...geez

[@mclarenbutton6342]

@@18magicMARKer This ^^. Some dumdb fucks would still like to nitpick on small things, zero perspective whatsoever.

[@techmetal2292]

They literally show you how much they applied, what’s your issue?

[@motoscro951]

We already know the answer…

[@funnymoney6969]

Can you imagine putting that on someone’s butt checks?

[@santiagosantarge819]

Don't do it!

[@funnymoney6969]

@@santiagosantarge819 I wish you would have told me this 3 days ago

[@Kurzawaa]

@@funnymoney6969 are you ok?

[@josephbohme7917]

It is only a weight of 14,400 / 4 and that is 3,600 per block which looks to be a surface area of 8"(d)x Pi= 25sq/in + 1"x8" flange= 33 full surface adhesion area or only a weight of 42 pounds per sq/inch Not a crazy number. imagine a well supported cross member with a 1 sq/in" glue bond....... Big deal. Also remember that aluminum & stainless have a 30% greater adhesion than polymers & glass. even less sometimes for wood. Hi end film adhesives can reach over 3000 pounds tensile per square inch.

[@beerz4us]

the epoxy is on the single point above the shackle, not the four attachment points.

[@nickrangel139]

LOL, that's a lot of thinking to be completely wrong.

[@Baigle1]

its at least ~170lb/sqin since each of the four points doesn't have your estimated 58sqin of contact. still not any good even if the estimations are off.

[@Doctorbasss]

want crazy number tested? check this out!: kzbin.info/www/bejne/eqKum2yfrMxkg80

[@burakkucuk6855]

laga luga

[@ChargedPulsar]

This testing strategy is gimmick marketing. Show us 1million automated test results under different durations, materials, environments. Give us the papers.

[@utribit4767]

wrong ADV: 1) you talk to world you should talk also KG not just LBs 2) you did not describe what this glue :D innovative and amazing will be for what application or industry :D I gave you valuable smart feedback and also it's free am so kind sometimes :D

[@Todro101]

utri bit huh