I got through full breakdown of the new 3M performance hvlp gravity feed spray gun. We spray pigmented and clear back to back and review its capabilities.
Пікірлер: 24
@TheGunmanChannel3 жыл бұрын
These are great guns mate. I liked your review. Keep up the good work.
@thebeardedfinisher3 жыл бұрын
Thanks 👊🏼👊🏼👊🏼
@toddtempco54543 жыл бұрын
Great to see a review that’s not auto spraying with the Accuspray. I think I’ll pull the trigger on one soon.
@thebeardedfinisher3 жыл бұрын
You won’t be disappointed. There great guns.
@luisdelamora2 жыл бұрын
Thank you, your review is the most ilustrative I had seen in youtube about this item.
@slawomirbieganski5315 Жыл бұрын
With 2k white poly do you have to reduce it Also what tip size you recommend for 2k white poly?
@dannybouchard55202 жыл бұрын
I am going to have a good hard look at this gun set up. 3M hasn't made many duds in all the stuff that they make. Thanks for the advice. P.s are you keeping that gun set up in your shop?
@luisdelamora2 жыл бұрын
is water based polyuretane?, would the gun works with oil based polyuretane too?
@thebeardedfinisher2 жыл бұрын
It will work on everything. You can get nozzles from 1.3 all the way to 2.0 with same needle assembly. Simply change nozzle when switching from solvent to water. Works perfectly. I do it all the time.
@mikemyers73172 жыл бұрын
Would love to know what you use to weigh your material. Thanks.
@thebeardedfinisher2 жыл бұрын
I’m a huge fan of Sartorius gram scale.
@mikemyers73172 жыл бұрын
@@thebeardedfinisher Thanks!
@cph34593 жыл бұрын
Do you need to use a new tip every time the gun is used or can they be used a few times
@thebeardedfinisher3 жыл бұрын
The manufacturer says I believe it’s about 20 hours per tip so yes you can reuse them. I have talk to people who are getting 40 hours plus per tip. A lot of it depends on what you are spraying and how well you clean it out after you’re finished
@taproom1135 ай бұрын
@@thebeardedfinisher Exactly. With care, users are getting much more life out of the tips than 3M says. Nice to find a manufacturer that is conservative in their performance descriptions. Love this gun. (Home DIY guy just learning). ^v^
@raudelbencomo53723 жыл бұрын
What kind of reduser and hardened you're using?
@thebeardedfinisher3 жыл бұрын
This is Sirca 2K Polyurethane. They have their own hardner and we are using their medium fast reducer.
@ericmcniff13 жыл бұрын
What pressure are you running at the gun?
@thebeardedfinisher3 жыл бұрын
Typically we run anywhere from 30 to 38 psi at the gun depending on the material.
@T3glider3 жыл бұрын
Is that a NIOSH approved hat?
@thebeardedfinisher3 жыл бұрын
I thought all camo was niosh approved. 😜😜
@samanazimi24453 жыл бұрын
حرف نداره👍👍
@SOLDOZER3 жыл бұрын
The Gunman also exposed the shady stuff these "reviewer" are asked to do by 3M. 1) Speak highly of the gun 2) Get paid.
@thebeardedfinisher3 жыл бұрын
Hahaha. Thanks for the comment. Clearly I’m not anywhere near big enough to get paid. All guns have flaws. Nothing is perfect but for the money this is a great product.