Thanks Tamar. I bought this system several years ago and I just couldn’t get the set up to work. Using your great detailed explanation, I’m going to take my iPad down to the shop & use your presentation to install these much needed devices on my tablesaw. Thanks a lot. You are a great woodworker!
@3x3CustomTamar5 жыл бұрын
Awesome! So glad it was helpful! Yeah. The instructions were a bit confusing. So I’m happy to have cleared it up!
@jimcoogan15295 жыл бұрын
@@3x3CustomTamar No problem. I posted it on my page, Coogan's Workshop, and linked it to MJ's page. I also posted it to their page too :-)
@3x3CustomTamar5 жыл бұрын
Jim Coogan awesome!
@unklbuk12 жыл бұрын
Did you measure the 2inches on the inside, middle,or outside of the blade? Could be a small detail that could change the accuracy. BTW, excellent instructional on a real pain as far as their instructions goes.
@steveurquell30315 жыл бұрын
For anyone wanting to do woodwork, this channel is so filled with amazing inspiration and awesome projects. Could you do a tour of your shop and show us how you've set it all up, some history of what you got first etc., and what you're missing? I feel you have tons of smart tricks in setting up a good shop just laying around. Anyways, cool video as always :)
@3x3CustomTamar5 жыл бұрын
Really appreciate that! Maybe I’ll do a Q & A video soon
@dadnar76152 жыл бұрын
Bless you for making this. My brain was really hurting reading those instructions. So much clearer here.
@terrymunsee67742 жыл бұрын
I also have a Dewalt contractor table saw this has been very helpful for me to make my life more safe and my time in my shop/ garage more fun thanks for all you do
@3x3CustomTamar2 жыл бұрын
Awesome
@bradstewart50493 жыл бұрын
I get so much out of your videos! Please don't ever stop doing what you're doing!
@3x3CustomTamar3 жыл бұрын
So awesome to hear!
@guermeisterdoodlebug79804 жыл бұрын
Your videos show that you are a talented and creative woodworker, but your charm and delivery are unsurpassed on KZbin.
@3x3CustomTamar4 жыл бұрын
So nice to hear. Thanks! ☺️
@BicBones4 жыл бұрын
So happy I've found you. You're a fountain of knowledge, and ideas.
@3x3CustomTamar4 жыл бұрын
So nice to hear. Thanks!
@airweaverballoons6264 жыл бұрын
Thank you so much for this video. I installed my MJ splitter after actually talking directly to the guy at the company who does the tech support. I have a powermatic 66 with phenolic inserts, that need a little more set up for drilling. I have to redo a plate after resetting my table to a better calibration to the blade, so this reminder of the process was helpful. I love your channel!
@3x3CustomTamar4 жыл бұрын
Awesome! So glad it was helpful!
@zavoina5 жыл бұрын
My 1980's Sears contractors saw doesn't have a riving knife and the splitter and guard are usually off when I make cuts because it doesn't align correctly and blocks the wood because that kerf is not aligned. I've see these add on splitters but actually seeing it installed and used is helpful. Thank you.
@3x3CustomTamar5 жыл бұрын
Awesome! Stay safe out there!
@gavandarragh14804 жыл бұрын
You legend! Having just bought a dewalt table saw and after losing sleep for two nights trying to work out what I was doing wrong, you show me the solution. Despite having my blade at 90 degrees I kept on getting little slivers of light on one edge of the cut. I’ll spend the day making a zero insert. Thank you so much.
@3x3CustomTamar4 жыл бұрын
Hope it helps!
@Snagglepuss19524 жыл бұрын
Did not expect as much deformation as you got, may explain the problem I have been having. Any thanks so easy to watch as usual, cheers from NZ
@davehernandez41773 жыл бұрын
If I said it once, I’ve said it a thousand times. You ROCK! Thank you for all of these wonderful tips to help keep us safe.
@3x3CustomTamar3 жыл бұрын
Glad you like them!
@AB-nu5we5 жыл бұрын
Safety is good. And that little savings you get each time you don't have to break out the hand plane or jointer to straighten that edge really adds up. Thanks for doing the tl;dr for us.
@3x3CustomTamar5 жыл бұрын
Yeah. I hope it’s really going to improve my productivity and safety!
@heyimamaker5 жыл бұрын
You brought up a really good point about the tension and how your saw will stop. The big cabinet saws have so much more power that they would easily shoot the board back on you. I saw those little Kerf things before but your install really helped explain how they work. 👌
@3x3CustomTamar5 жыл бұрын
Yeah. Kickback is no joke. Glad you liked the video!
@austinveatch69935 жыл бұрын
Just did this exact thing 3 months ago and can not believe that I waited so long. Made my life sooooo much better.
@3x3CustomTamar5 жыл бұрын
Awesome! So glad I made the right choice!
@austinveatch69935 жыл бұрын
Ha!! You seem to be making plenty of them. Thanks for the fun content. You are the top of the “fine work/job site saw” niche. Keep killing it Tamar.
@3x3CustomTamar5 жыл бұрын
Austin Veatch ha! Thanks so much! 🤘
@johndavid31142 жыл бұрын
Way better instructions here than with the actual product.
@3x3CustomTamar2 жыл бұрын
Yeah. I was very confused. Ha
@intothemaze88654 жыл бұрын
Thanks so much Tamar. I had a kickback incident, for the first time, a couple of years ago. I had no idea how dangerous table saws could be and how careless i had been for so many years. I've only just (this week) mustered the courage to do something about making my saw safer, so i can continue this awesome hobby. The first fix was making a zero clearance plate. Seconds after this video, i ordered the MJ Splitter system. Can't wait to start ripping timber with confidence again.
@3x3CustomTamar4 жыл бұрын
Awesome! Good luck installing it!
@anupshende1986 Жыл бұрын
With due respect, splitter is not a replacement to riving knife. This is sponsored video for Microjig. Get yourself a sturdy riving knife to be on safer side.
@rickbratto61675 жыл бұрын
Excellent. Here is a helpful tid bit. I have a Ridgid job site saw. The metal plate (like your original) accomodates 90 degree and angled cuts - but not zero clearance. I bought the "Fastcap" zero clearance tape, useful for miter saws, table saws (like mine) and router fences (as needed). When on KZbin type in Fastcap zero clearance tape. You can see its usefullness. I bought mine from Lee Valley for $6.00 and feel it is very much worth the price. My saw plate (no lie) is slightly BELOW the saw table (WTF?) not sure why, but in this case it worked to my benefit because the tape made the plate flush to table! Thank you for this video (explained very well). The Microjig instructions made my head spin for my "yellow" set (thin kerf). Have a great afternoon.
@Boliodog19903 жыл бұрын
Very well done and yes the instruction manual was confusing.I bought the unit today and after I read the manual I went searching for help. Thanks
@3x3CustomTamar3 жыл бұрын
Glad you found it useful! I hate reading instructions. Ha
@kortt5 жыл бұрын
Very interesting solution. I have the same saw and made an insert from scratch which allows the use of the original riving knife. I was surprised you had gone with a purchased product since you make so many cool custom fixtures. Great video as always!
@3x3CustomTamar5 жыл бұрын
Thanks. Yeah. 2 reasons why I decided to purchase. 1) time. Ha. 2) the table saw is super dangerous. I wanted something that I knew would be truly reliable. I don’t take my fingers for granted. Ha
@kortt5 жыл бұрын
@@3x3CustomTamar Both excellent reasons!
@chemcody51195 жыл бұрын
I had the same set up on my saw for several years. I have since moved over to a Shark Guard. My saw did not have a splitter or riving knife so this was a huge upgrade. I still use the Leecraft insert with microjig splitter for certain situations. You did a great job explaining the microjig set up instructions.
@3x3CustomTamar5 жыл бұрын
Never heard of the shark guard. I think this is going to be a good set up for now!
@clydebalcom82524 жыл бұрын
Safety first and your family will thank you. Have fun and enjoy your time in the shop.
@paulnelson8023 жыл бұрын
Thank you, Tamar. I have slight conundrum: using a 7 1/4 blade in 10 inch table saw. The kerf for the blade thickness is 2/32nds for 7 1/4 and 3/32nds for the 10 inch blade. It does not appear Microjig has a 2/32nd option for their kits. There are some benefits to using a 7 1/4 blade for certain applications. Hope this might be of interest to you for some future video project. Thank you, again. -Paul
@andrewwappner59685 жыл бұрын
Hey Tamar, I also bought the exact same zero clearance plate. I discovered a very cool trick to make additional ones. When using a template bit on your router to duplicate the plate, you can back the side adjustment screws out ever so slightly beyond where they would need to be for a tight fit on your saw. Then when you duplicate the plate the bearing will trace around the screw and leave a little wooden nub on the side of the copy. You can then sand those nubs down for a perfect friction fit. I used this to make a plate that will accept the riving knife, dado stacks, etc. then my main plate has the micro jig splitters.
@3x3CustomTamar5 жыл бұрын
That’s a great idea! Maybe I’ll do that for the other blades I have
@jonathanvirtualcouch37414 жыл бұрын
Thanks for taking a complicated topic and presenting it in an easy to understand video. ❤️
@3x3CustomTamar4 жыл бұрын
Glad you liked it
@user-gs2pq8kc4r9 ай бұрын
Best video I've seen on the topic. Very well produced.
@deltauniform23213 жыл бұрын
Tamar, you are fantastic. I'm hooked on your woodwork videos. your an inspiration to us all, keep up the good work. Delta from the UK.
@3x3CustomTamar3 жыл бұрын
☺️☺️
@garylondon41373 жыл бұрын
I have no idea how I found your first video, but I've gotten quite a few ideas from you; Thanks! I just ordered a MJ Splitter Steel Pro, great tip!.
@3x3CustomTamar3 жыл бұрын
Awesome!
@outerbanksproductions_videos4 жыл бұрын
Again, another thumbs up! You just don't stop, girl! Great instructor!
@3x3CustomTamar4 жыл бұрын
Awesome to hear! Thanks!
@MattMuirhead3 жыл бұрын
Even though I have a number of MicroJig accessories, I had never seen this one until this video. I bought an old Delta Unisaw without a riving knife or blade guard and have been looking for a solution. Last week I was resawing some QS white oak that had enough tension to completely bind up the 3hp motor and scare the hell out of me - luckily because of the Grrripers, I didn't get a kickback or other disaster. This will be a huge help - just placed my order. Thanks for the great video!
@3x3CustomTamar3 жыл бұрын
Awesome! Glad it was helpful!
@patricksmith29213 жыл бұрын
Great straightforward and concise video..got it all set up on same saw with no issues! Thanks for taking time out.
@Brentlythomas134 жыл бұрын
Super video! I have a Unisaw I rebuilt and have been thinking of the MJ Splitter for a while now-buying it tomorrow. Thanks for your channel!!!!
@3x3CustomTamar4 жыл бұрын
Awesome. Glad you found it useful!
@mikeandlucky5 жыл бұрын
Another very professionally produced video with excellent instruction on a topic where I really needed the help. Thanks.
@3x3CustomTamar5 жыл бұрын
Awesome. So glad you found it helpful!
@justinjones92554 жыл бұрын
Good video. I have a ‘93 Unisaw and is from before riving knife’s were used. I have the normal kerf MJ splitters but haven’t installed them yet. Now that I’ve seen your video I have no excuses. My understanding of the kerf keepers’ purpose was to, how to say, go with the board. Tension keeps it in the kerf through the cut thereby keeping the kerf open. Because of this one can continue the cut vs what you said (stop the cut and figure out another way to do the cut). If I am right it seems an important distinction.
@3x3CustomTamar4 жыл бұрын
Well. The instructions said to stop the cut. In practicality since I posted this video I kept the cut going and it was fine.
@HBSuccess5 жыл бұрын
I have the same setup except for a Bosch. I find the MicroJig kerfkeeper to be a PITA it’s just not precise enough- or rugged enough when starting the milling process....so what I do is turn off saw at first sign of binding, and jam a shim shingle in the kerf to keep it open and finish the cut. We buy kiln dried S2S and typically cut everything oversized and let it sit for a week or more before final sizing - just cull anything that gets too wacky. The Bosch is underpowered but easy to get to Jobsites so we make it work.
@3x3CustomTamar5 жыл бұрын
Yeah I’ve done the shim thing before. These saws are small but they get the job done!
@gavandarragh14803 жыл бұрын
Thank god you did this video as I guarantee that I wouldn’t have read those instructions thoroughly.
@3x3CustomTamar3 жыл бұрын
Haha yeah. It was a lot to take in for such a simple product. Ha
@coelimusic87143 жыл бұрын
Thanks so much for doing this. The instructions are so complicated! You made it easy.
@3x3CustomTamar3 жыл бұрын
Awesome. Glad you found it helpful
@3dprint4woodworking592 жыл бұрын
Amazing Tamar! Thks to that I completely designed an adjustable, PLA made zero clearance insert especially for this table saw, with integrated splitter and kerf keeper, lock mechanism etc! I would be happy to ship one to you with other stuff I made also for the dewalt table saw! (For free of course)
@aprildegele1510 Жыл бұрын
Thanks much for demonstrating the install!! Been thinking about this kind of splitter (because the one I have now won't allow for partial thickness cuts at all) for a while now and you just convinced me that it's not as difficult to install as the directions look. Yikes.
@roberthosier40625 жыл бұрын
I've got the same saw and had some tension in a board i was cutting last weekend. It made me a bit nervous to continue cutting and everything turned out ok but i still wish i'd had this setup! I'll definitely be doing this upgrade! Also, i never knew about the stock throat plate causing the cut to be off. Thanks for the informative video!
@3x3CustomTamar5 жыл бұрын
Glad you found it informative! Yeah. I might be a bit too meticulous but I always found some parts of my cuts to be slightly off even if my Blade was set to 90. It took me a while to figure out what he problem was.
@adrianaosirish60655 жыл бұрын
Well done super video cheers .This is a very important as many veterans of violent kick back will know and boy/girl does it happen fast .Thumbs up !!
@3x3CustomTamar5 жыл бұрын
Thanks! Yeah. It’s pretty scary!
@reddog9074 жыл бұрын
The husky tool chest behind you , I have the exact same one . I have a General cabinet style saw and the recess in the table is only 1/4 inch deep so I have to use a good piece of hardwood to make them . Thanks and stay safe.
@3x3CustomTamar4 жыл бұрын
Awesome! You too
@stephentebbutt71615 жыл бұрын
Good day Tamar, great info i made my own inserts i love how you go into such detail, you make it easy to follow.Steve in OZ
@3x3CustomTamar5 жыл бұрын
Thanks for the feedback! Appreciate that!
@wortheffort5 жыл бұрын
Truly excellent content and a perfect example why you’ll continue to do well. Do wish you had expanded on difference between splitter and riving knife as the difference between blade and splitter is quite variable dependent upon blade height so safety aspect is very different whether blade at full height or lower. It’s a big point beginners might not recognize.
@3x3CustomTamar5 жыл бұрын
Thanks! Hmmm. Yeah, I don’t think it will be a problem when it’s at full height though
@wortheffort5 жыл бұрын
3x3Custom - Tamar absolutely correct. + & -‘s
@pmdinaz3 жыл бұрын
Sounds like a way more convenient method than I use. I use a tile setting wedge while cutting, in conjunction with my riving knife. I keep a stack of them in my 'fence caddy'. This sounds like a more reliable alternative. Thanks!
@mikewarner27424 жыл бұрын
Great video: Had a piece to get hung on stock insert. Saw threw it back at me as the piece broke off at a knot. Five stiches in left thumb and fractures bone later. Great job, Miss T.
@3x3CustomTamar4 жыл бұрын
Ouch.....
@mikewarner27424 жыл бұрын
@@3x3CustomTamar Miss T, you've done well with your videos. I've picked up several good ideas. If you and yours ever get to Nashville, TN, be sure and look us up. Wife and I live in Donelson, about 7 minutes to the airport.
@twotopsturning64935 жыл бұрын
Cool, I had looked at these in the past and my understanding was the kerf keeper was slightly wider and would get stuck in the board every cut. As that sounded like a pain, I resorted to turning my saw so it faced the garage door, and not the windows! Lol kickback is no joke. I may have to revisit this as an option.
@3x3CustomTamar5 жыл бұрын
Ha. Good planning. 😂 the kerf keeper is actually thinner then the splitters and will only lift when there is actual tension on boards. Showing you that it it not safe to cut instead of feeling it and then kickback occurring.
@twotopsturning64935 жыл бұрын
@@3x3CustomTamar that makes alot more sense, it's going on the wish list! Furthermore, I can't recall if you use a feather board? If not the level of cut control they offer is incredible... They even make them in yellow to match your saw 😜
2 жыл бұрын
very nice. thank you. be happy. bravo.. see you....
@MrBobisadog5 жыл бұрын
Great job. I bought from your affiliate links about everything from Your last video. Having fun gouging everything! Keep up the awesome videos.
@3x3CustomTamar5 жыл бұрын
Awesome! How fun is that gouge?! I want to get more!
@DannerPlace5 ай бұрын
Very helpful, thank you for posting.
@AndrewMcQuillen5 жыл бұрын
Great explanation, Tamar. One day these will be available in the UK, you are so lucky in the US, you get all the cool stuff😀
@3x3CustomTamar5 жыл бұрын
Thanks! I never realized how lucky I was to have access to all these cool things. Ha
@musicamex3 жыл бұрын
I really like how your brain works!
@3x3CustomTamar3 жыл бұрын
☺️
@HowIDoThingsDIY3 жыл бұрын
Great video Tamar!
@3x3CustomTamar3 жыл бұрын
Thanks!
@WPGinfo3 жыл бұрын
OMG Installing this riving knife thingamajig is soo complicated! This should be improved somehow. Once completed this seems to work as advertised... Thnx, Willem
@rick914435 жыл бұрын
Great video and golly gee wizz you sure can get EVERYTHING you need back home for woodworking...Eternally GREEN with envy..cheers..rr Normandy, France
@3x3CustomTamar5 жыл бұрын
Thanks! Yeah. I guess I take that for granted!
@flowoodpiano7173 жыл бұрын
If I had seen this video a week ago, I could have saved myself a trip to the ER. Thankfully I didn't cut anything **off** but I sure cut a couple of fingers UP.
@3x3CustomTamar3 жыл бұрын
Oh no.....
@eringerych66164 жыл бұрын
I have wondered why I ended up with square issues with the aluminum throat plate. This gets worse when cutting thicker stock. This was helpful.
@3x3CustomTamar4 жыл бұрын
Glad it was helpful!
@edkramer655 жыл бұрын
I was wondering when you were going to upgrade & do this. Rocking it as always Tamar. 👍👍
@3x3CustomTamar5 жыл бұрын
Projects just kept taking precedence. Things slow down in the summer so I get to do small upgrades like this 🙌
@oldsoul5263 Жыл бұрын
I'll be purchasing this soon. I THINK I should be able to use the saws original riving knife. I'm thinking if I just make a tiny notch in the back of the riving knife to leave more material on the zero clearance insert for rigidity (very tiny amount but it's something). I'm just spitballing at the moment. Before I get too far ahead of myself I have that combo Dewalt 10" with stand. I've also purchased a thin kerf Freud blade, so I'm also seeing if I can use the factory riving knife with that blade. I'm hoping with the zero clearance insert and modified riving knife... that I'll bring life to this saw because it's frustrating how much "out of tune" it is. Even the table is waving at me lol. I can't wait to get the saw in a workbench or cart to itself because the stand it came with is a total tripping hazard!!!
5 жыл бұрын
Thanks, I have understand for use MJ splitter. Merci encore pour cet agréable sourire.
@3x3CustomTamar5 жыл бұрын
Awesome!
@lisaalbrecht79005 жыл бұрын
Thanks so much for this very informative video. I love your table saw related videos because I have the same saw and so I know that if you can get something to work with it, then I can too. Thanks!!
@3x3CustomTamar5 жыл бұрын
Awesome! So happy you find them helpful!
@azchilehead41704 жыл бұрын
Very helpful tips. I am new to woodworking and want to do this. I am guessing DeWalt didn't like this idea. Every place I have looked online is out of stock. I guess I will have to attempt making my own. Thanks for the video. Very helpful
@3x3CustomTamar4 жыл бұрын
Oh man. Good luck!
@markbryan99895 жыл бұрын
Thanks Tamar! Unfortunately, I cannot get a zero tolerance plate for my old and cheap table saw. So, I made one out of oak and included a built in separator. It works but is not ideal. Maybe it is time for a table saw upgrade!
@3x3CustomTamar5 жыл бұрын
Ha! Maybe it’s a sign 😉
@davidshearer5675 жыл бұрын
Great video! You covered and explained a few items that I've been struggling with recently! I'm just getting serious about woodworking (finally!!!). I've noticed that my cuts on the tablesaw are wonky as you demonstrated. So, I'm more motivated to get started on the zero clearance throat plate for more reason than the cool factor now. You really explained and demonstrated that well! I have a piece of cedar ready to cut and shape tomorrow! Super video! Thanks for the help!
@3x3CustomTamar5 жыл бұрын
Awesome. I hope that solves the issue!
@markyour69984 жыл бұрын
Thanks for the explainer! Also, glad to see another female in the trades!
@3x3CustomTamar4 жыл бұрын
Awesome. Glad you liked it!
@robertajohnson36714 жыл бұрын
You just solved my problem... Thanks... I have the same saw but it is really loud... Have you ran into this problem, if so please share
@3x3CustomTamar4 жыл бұрын
Awesome. Yeah. It’s just loud. Nothing you can do about that
@zouhirtouti70925 жыл бұрын
My favorite Channel. We waiting more from you teacher. Thanks
@3x3CustomTamar5 жыл бұрын
Awesome to hear! Thanks!
@billcoley85203 жыл бұрын
Next video you do please take the time to show underneath the insert and the slot where the insert will set. Thanks
@pierrerousseau87705 жыл бұрын
That video was very informative and also very clearly explained ...fabulous job !!
@3x3CustomTamar5 жыл бұрын
Glad you liked it. Thanks!
@lloydkeller18092 жыл бұрын
Great video. Thank you
@hummelchenmario5 жыл бұрын
Mega geile idee . Grade die kleinen spaltkeile , wichtig bei echholz da kann schnell mal das Brett ein Treffen und für nuten einfach rausziehn 👍👍👍👍👍
@3x3CustomTamar5 жыл бұрын
Sorry. Don’t understand. But I think I should say thank you. Ha
@hummelchenmario5 жыл бұрын
splitting wedge is important because of risk of injury. if you want to cut a nut, the wedge disturbs, that's why I find the conversion kit a good idea. from German to English with googel tranzlator made since my English is not good 😧
@tomgrantham99928 ай бұрын
Great explanation. Thanks 😊
@3x3CustomTamar8 ай бұрын
Glad it was helpful!
@The_man_himself_675 жыл бұрын
Thanks Tamar. It's not a problem to extend the slot to accommodate a riving knife. Much safer than a splitter IMHO. I made a couple more for 30 & 45deg cuts. Surprised at how crappy the insert is, even on a DeWalt.
@3x3CustomTamar5 жыл бұрын
If it’s not a problem why would the instructions for the insert say i can’t use it for the dw745? I assumed it had something to do with cutting all the wa through the back. Yeah. The stock throat plate really sucks
@The_man_himself_675 жыл бұрын
@@3x3CustomTamar who knows. I guess each saw is different. I just know it easy to do on my cheap Rage 5s. I can't afford a DeWalt. 😀
@keningilbert3 жыл бұрын
@Larisa Ulkina Here's a glimpse of how to do it. You simply mark the widest point in the slot that the RK needs for clearance. Then place the new insert on top of original plate with blade extended up into new plate. Then butt fence up to new plate, turn on TB and slide new plate to the previously marked point. kzbin.info/www/bejne/imWrY6dqm7Ojhck
@johnnymarano75703 жыл бұрын
Learning so much from you! Thank you for the great videos!
@3x3CustomTamar3 жыл бұрын
Awesome to hear!
@Kevin-on1up5 жыл бұрын
Nice video. Never seen anything like this jig in the Netherlands.
@3x3CustomTamar5 жыл бұрын
Thanks! I guess I take it for granted I have access to all this awesome stuff
@limbertpv5 жыл бұрын
Amo todos tus proyectos y tus consejos. Besos y abrazos
@paulwright28184 жыл бұрын
Thanks so much! I really enjoyed that video. Especially about the added stability
@3x3CustomTamar4 жыл бұрын
So glad you liked it
@allancannamore27745 жыл бұрын
Great video. Thanks. The splitter looks like a pain to get just right despite your excellent instructions. Couldn’t you extend the slot cut in the insert through the back of the insert to accommodate the saws riving knife?
@3x3CustomTamar5 жыл бұрын
Thanks. It wasn’t too bad. The instructions on the insert said i could not extend the cut for the riving knife on this saw. Probably bc I would have to cut all the way through and would mess with the structural integrity of the insert
@Curioso56975 жыл бұрын
Tus trabajos e ideas son siempre exelentes. Felicitaciones por tu canal.
@3x3CustomTamar5 жыл бұрын
Thanks I think. Ha
@Curioso56975 жыл бұрын
@@3x3CustomTamar . Como has aprendido a trabajar tan bien la madera?? Es una herencia de tu padre o lo aprendiste en algun instituto??
@FredMcIntyre5 жыл бұрын
Thanks for the info Tamar! 😃👍🏻👊🏻
@3x3CustomTamar5 жыл бұрын
Glad you found it informative Fred! 🤘
@elzekegkids4 жыл бұрын
Thanks to the explanation. Take care
@3x3CustomTamar4 жыл бұрын
Glad you found it helpful
@joecraft44095 жыл бұрын
Great review. Shopping for a new saw now, liking your set up due to the possible portability
@3x3CustomTamar5 жыл бұрын
Glad you liked it. This saws been serving me well for the past 3 years with some minor tweaks like this
@Andy.H.H.4 жыл бұрын
Great video! Beginning woodworkers should know this is only if the tables blade is set a 90 degrees to the table (98% of cuts made). If the blade is tilted, use the original, wider insert. Also, these inserts are "currently unavailable" on amazon.:-(
@3x3CustomTamar4 жыл бұрын
Yes.
@mattmac65465 жыл бұрын
Also really helps with dust collection!!!
@3x3CustomTamar5 жыл бұрын
Yes! Forgot to mention that!
@KB-ff9wx4 жыл бұрын
VERY useful video. Actually using it to setup my own zero-clearance insert (have the same saw, got the same insert, waiting for the same MJ Splitter to be delivered). Sorry, forgot to click on "your" Amazon link when ordering the insert. :-(
@KB-ff9wx4 жыл бұрын
Also used your video on how to align the saw blade. Worked like a charm! Including the fact that you have to move it slightly beyond the zero mark before tightening those screws. You ARE awesome and deserve all the likes you get (and then some)! And none of the dislikes. :-)
@3x3CustomTamar4 жыл бұрын
So awesome to hear! Yeah! Glad you found that tip useful! The first time I aligned my saw it took me hours bc it kept being off... Finally figured out tightening the bolts was making it move.... Glad it saved you the frustration I went though. ha
@bobbray96663 жыл бұрын
I just installed this and drilling into my Leecraft zero insert was difficult with the provided drill bit. The Leecraft zero insert is made of a very dense plastic polymer and the bit get extremely hot and impossible to drill through in one plunge. I have mostly thin kerf saw blades but one very nice Forrest 1/8" blade that will need an additional MJ Splitter 1/8" $40 kit. In hindsight, I should have just bought a riving knife but I would need to make a cutout in my insert to accommodate that. Probably less time to do that than this whole MJ Splitter install. I also need to pull these out to use the full table saw top for measuring something like a 24" wide whatever. It seem this is a very niche product.
@robertevans64815 жыл бұрын
Very well explained...looks like it will work out great.
@3x3CustomTamar5 жыл бұрын
Thanks! It seems like it’s going to be great
@TheMixer14 жыл бұрын
Thanks for the layman's explanation just got them, saw the instructions , but now im off to the garage to install then .....
@3x3CustomTamar4 жыл бұрын
Awesome!
@berthatton94105 жыл бұрын
Well that was super helpful. Thanks. Well done as usual.
@3x3CustomTamar5 жыл бұрын
Awesome. So glad it was helpful!
@karenmitchell68145 жыл бұрын
That was a great demo and explanation.
@3x3CustomTamar5 жыл бұрын
Awesome. Glad you liked it!
@IEnjoyCreatingVideos5 жыл бұрын
Great upgrade Tamar! Thank you for sharing the video with us.👍😎JP
@3x3CustomTamar5 жыл бұрын
Thanks! Glad you like it!
@IEnjoyCreatingVideos5 жыл бұрын
Your very welcome Tamar! Thanks! Have a wonderful week!😎
@FD-dh2fu3 жыл бұрын
Great video. Why not just set one offset towards fence as a feather board and the last one pushing away from blade? Best of both worlds and you never have to worry about binding?
@3x3CustomTamar3 жыл бұрын
Thanks. I was just following the instructions I guess
@FD-dh2fu3 жыл бұрын
@@3x3CustomTamar Thank you. Love your videos. Keep up the amazing work, your detail and ideas are fantastic:-).
@ronaldomac49183 жыл бұрын
Another quality instructional video......! btw where did you get thar orange push stick from...? Wouldn't mind one of them like..... :)
@3x3CustomTamar3 жыл бұрын
Thanks! I have it linked in my amazon store that’s linked below
@ThemhealsАй бұрын
For a total cost of 27 cents I designed and 3d printed the same riving knife and its drill template. Childs play. The drill guide I made uses a small extended piece that fits perfectly inside the saw slot and you just slide it to position the holes in the guide where you want them and then drill.
@austinveatch69935 жыл бұрын
Just did this exact thing about 3 months ago
@rakeshbhansali49075 жыл бұрын
Excellent Tamar! Keep it up..
@3x3CustomTamar5 жыл бұрын
Thanks!
@hassanal-mosawi60495 жыл бұрын
well done, thanks for sharing that I need one for my table saw!
@3x3CustomTamar5 жыл бұрын
Glad you like it! So happy to have it!
@valdecimarques98284 жыл бұрын
É bom usar em pinos que fecha o corte e trava a serra quando está pouco seco
@MultiTom19565 жыл бұрын
Thank you Tamar 😊I still do not own a table saw 😀but a mitre saw I do . I think I will make one . 😊