zero clearance insert

[@SMee67]

Very nicely done mate 👍🏽 Zero clearance plate make life so much easier at times, always good to have one or more on hand when needed.👌🏽 I've seen some guys make spare splitters out of old saw blades.

[@TachiOhyo56]

Hello,Bill Thank you for always watching my video And thanks for the nice comment I will also make a spare splitter. Thank you mate

[@yoji_diy]

簡単に作っていらっしゃいますがゼロクリアランスは重要なだけに素人には難易度が高い壁です。自分も何枚か挑戦していますが100点と言える物は未だ作れずにいます。天板と差があって段差になってしまえば意味が無いですし、水平にピタリとするには相当難易度が高い作品と言えますね。ローマは一日にして成らずを心に、ミスが己を育てる！完成品に納得行かないことはレベルアップの証！と信じて精進します。いつも丁寧なコメントをありがとうございます。もちろんそれは大変嬉しいですけど、あなたの大ファンと認めて頂けるのであるならば、是非とも後回しにしてくださいね。自分は「読んだよ！」のハートマークで充分です。今週も素晴らしい動画をありがとうございました。その出来栄えにすっかり降参しました。(笑)

[@TachiOhyo56]

こんにちは、ヨウジさん このDeWALTのゼロクリアランスのプレートは形状や規格がかなり合理的で比較的簡単に設計されます。 今までのがとてもてこずったのでとても楽でした。 とは言っても完璧ではありません、手を抜いた箇所もいくつかあります、 こんなふうに後になって反省しています。私の今の状況が落ち着いたらまた再び研ぎ澄まされたビデオを作ります。多分！ いつも親切なコメント有り難うございます。

[@norbertgallice7769]

Bonjour, encore une excellente vidéo et un super résultat....Un seul mot....Bravo👏👍👍! Merci pour ce partage. Norbert (France)

[@TachiOhyo56]

Bonjour,Norbert Merci d'avoir toujours regardé Ce projet a été le premier à le faire maintenant! Mais je suis très en sécurité. Merci pour ton gentil commentaire À bientôt

[@TheLizardOfOz]

I always enjoy watching your videos. Always good ideas, fine workmanship, and calming to watch. Thankyou.

[@TachiOhyo56]

Hello,OfOz I'm so glad you enjoyed my video! And thank you for your kind comments I will continue to strive to make quality videos. Thank you See you again

[@nikburton9264]

Great video Sir! I am a day late watching it this week as I have been after the renovations, and starting new chickens, etc. Always something on a farm.

[@TachiOhyo56]

Hello,Nik Thank you for always watching my video And thanks for the wonderful comment It seems that innovation is progressing, it is wonderful, It's nice to imagine you feeding a chicken, Thank you

[@earthling5337]

Fantastic job. Loved watching it from start to finish.

[@TachiOhyo56]

Hello beautiful Earthling. Thank you for your patronage of my video. And thank you for your sincere and wonderful comments. Friendship from Japan...Tachi

[@mamcoraa4747]

Hasta ahora no hay nada imposible para usted. Es muy entretenido verle trabajar, estoy a la expectativa viendo cada paso hasta llegar al producto final y sorprenderme gratamente. Un abarazo

[@TachiOhyo56]

Hola,mamcora Muchas gracias por apoyar mi video. Y siempre me conmueven los amables comentarios. Estoy resolviendo mis problemas triviales poco a poco y preparando mi ambiente de carpintería. Gracias

[@giusepperussotto2534]

You did it! I was sure of that. This is one of the first empowerments to do for your table saw. A very fine work. Waiting for next...curiously. Have a good day, friend.

[@TachiOhyo56]

Hello,Giuseppe Thank you so much for supporting my video And thanks for the wonderful comment This plate created strength first, Next, we will repair a large sled. Perhaps! Thank you See you

[@valterleao6795]

Parabéns, sempre muito competente nos trabalho e quanta habilidade e carinho no que faz! Tenho uma igual a essa DW 745, qual disco da Makita que posso substituir para trabalhar com madeira maciça? Abraço aqui do Brasil 🇧🇷

[@TachiOhyo56]

Olá,Valter Muito obrigado por apoiar o meu vídeo E obrigado por seus amáveis comentários Sim, você pode substituir o disco Makita e usá-lo com madeira maciça Estou resolvendo meus problemas triviais aos poucos e preparando meu ambiente para trabalhar madeira. Obrigada

[@jeannoelbezia6201]

super le zero clearance salutations et grand merci pour tout ce que vous montrez

[@TachiOhyo56]

bonjour jean Merci pour vos salutations polies J'ai essayé le dégagement zéro avec certains matériaux, celui en bois dur est peut-être le meilleur. Merci et amitié du Japon

[@DonDIYProject]

So you did it again on your riving knife 😊. Nice, I like the PVC material.

[@TachiOhyo56]

Hi Don Thank you for your nice comments I agree with you, I like the PVC plate before painting it yellow. Thank you

[@troykruse5161]

Ohyo56 Just wondering where you found PVC that is that flat and that thick?

[@jeffsaxvik1294]

Pretty easy to do with all the fancy machinery!

[@TachiOhyo56]

Hi Jeff. Thank you for watching my video and for letting me know, Tachi.

[@franciscoyague4886]

que trabajo mas bonito , cuánto me gustario estar cerca de usted para aprender con su saviduria😍💕

[@TachiOhyo56]

Hola,Francisco Gracias por sus amables y maravillosos comentarios. Tú y yo somos muy buenos carpinteros. Gracias Nos vemos

[@theidlehandsworkshop3884]

Thank you for this, now I need to go make some for my own swirly blade of death !!! I've been meaning to do this for some time so I think this will be my next project. I've got a Ryobi however that's simply a pain in the behind to do anything with lol.

[@TachiOhyo56]

Hello, Thank you so much for supporting my video And always thank you for your wonderful comments. It is very convenient because I often cut thin parts I am solving my trivial problems little by little and preparing my woodworking environment. Thank you

[@MarkMcCluney]

Very instructive, very enjoyable, very good work! Thank you!

[@TachiOhyo56]

Hello,Mark Thank you for always watching My woodworking environment is changing slowly. Thank you for your kind comments

[@willybaetens4648]

Hi, Nice work, but your blade is still wobbly. I could not work with this problem at all. Keep it safe. Willy from Belgium. 😷😷😷

[@TachiOhyo56]

Hello,Willy Thank you for watching my video I replaced it with a Makita blade and at the time I installed the change ring by mistake! ! I understand the cause, so there is no problem. Thank you for your kind comments

[@АльбертДобрыйтатарин]

Как всегда,всё хорошо !👍 Спасибо Вам,за интересные видео. Удачи.

[@TachiOhyo56]

Здравствуйте, Альберт Спасибо за ваши добрые комментарии Я желаю вам счастья из Японии.

[@АльбертДобрыйтатарин]

@@TachiOhyo56 доброго времени суток Вам,мастер.✊. За Ваши пожелания хочу сказать Вам.."Зур итеп рахмат сезге" это на моём родном языке.)) А по русски значит- большое Вам спасибо. С глубоким уважением к Вам,и Вашей семье из России.✊

[@vasiliyivanishvili9025]

Nice work! Oak is perfect material!

[@TachiOhyo56]

Hello,Vasiliy Thank you for always watching my video And thanks for the nice comment This is a laminated wood I made of oak wood, I like the natural feel. Thank you

[@joseantonio-uc2jh]

Hola maestro,espero que se encuentre bien usted y su familia. Me ha gustado mucho el video, sobretodo el ajuste que le aplico a la máquina un trabajo realmente interesante y muy bueno, un saludo.

[@TachiOhyo56]

Hola,jose Muchas gracias por apoyar mi video. Y siempre gracias por sus amables comentarios. Poco a poco voy preparando mi ambiente de carpintería. Te deseo salud y felicidad desde Japón. Gracias

[@HepauDK]

I have a Dewalt DW745 (Type 4) myself. I wanted to make sure the insert wouldn't move under use, so I secured the back with a small piece of flat bar (repurposed piece of the bar of a quick clamp that the handle broke off of). On the front, where it is normally locked, I drilled and tapped an M4 threaded hole in the support /locking tap for a countersunk screw. It is still a work in progress though. As imperial dimensions are a bit hard to come by here in Denmark, the insert was made from 12mm formwork plywood with small patches of duct tape as spacers. Next on my list is to make threaded holes for M5 set screws and somehow secure the locking screw with a clip, as the only thing holding it in the insert when not in use, is the patches of tape on the bottom. What model is your saw? It looks like a DW745, but the blade size don't add up. It usually uses 10"/254mm blades. Oh, and what made you swap the Makita for the Dewalt?

[@TachiOhyo56]

Hello Henrik san Thank you for your polite comments. My Dewalt is DW745, the reason I abandoned Makita is that the blade is not parallel to the fence, and it's very difficult to adjust. You can't make a zero clearance plate. The top plate of the table is not flat. After changing to DewaltDW745, my woodworking has become a lot of fun, it meets my needs, my favorite.

[@HepauDK]

@@TachiOhyo56 It sure is a good little saw. I originally looked at a Bosch GTS 635-216 myself when it was on sale, but after seeing it "in the flesh", I found the fence rails way too flimsy. The rack-and-pinion rails of the Dewalt combined with 250W extra made the choise obvious. :)

[@LeosTueftelei]

Great video, as always ! 👌 👍 👍 Greetings from Austria, Leo 🙋‍♂️

[@TachiOhyo56]

Hello Leo Thank you for coming to my workshop again today And thank you for the good greeting Have a nice day Thank you friend See you

[@valterleao2798]

Grande Tachi…, estou sentindo falta dos seus ensinamentos. Abraço aqui do Brasil 🇧🇷 para o Amigo Tachi do Japão 🇯🇵

[@TachiOhyo56]

Olá amigo Valter. Estou feliz por ter conhecido você depois de tanto tempo. Estou ficando sem ideias para fazer com madeira! Mas pretendo voltar algum dia, Tachi🇧🇷🇯🇵

[@MCsCreations]

Really amazing work, my friend! Well done! 😃 Stay safe there with your family! 🖖😊

[@TachiOhyo56]

Hello,MC's Thank you for always watching my video And thank you for your kind comments, I wish you happiness.

[@davidharvey5672]

I like oak one best. I like you saw very good quality. Thank you for sharing

[@TachiOhyo56]

Hello,David Thank you for always watching my video And thanks for the wonderful comment This is a laminated wood I made of oak wood, I also agree with you, I like the feeling of nature. Thank you

[@omaromar-lg3yu]

Am happy for you ...you buy a new table saw ....vert Nice one .enjoy IT .take care chef

[@TachiOhyo56]

Hello,omar Thank you for your wonderful comments Buying a new table saw for me and communicating with friends is my great happiness. Thank you See you

[@omaromar-lg3yu]

@@TachiOhyo56 enjoy your new toy ...from My side i have makita 2704 and am happy with IT .life is short we have to enjoy IT every day

[@DrNostaw]

こんにちは！ いつものように、素晴らしい仕事です！ あなたの健康と福祉、親愛なる！

[@TachiOhyo56]

親愛なるАл эС いつも親切なコメントに感謝します。 日本からあなたの健康と幸せを祈ります。

[@GNU_Linux_for_good]

04:15 Holy cow! The brand new Makita blade is *wobbling* like that? How come..?

[@TachiOhyo56]

This event wasn't caused by Makita's blade, but by my blade installation! !! Thank you for coming

[@GNU_Linux_for_good]

@@TachiOhyo56 *Makitas* honor has been reestablished. ;-) That looked very scary. By the way - I'm about to build your 45°/90° quick jig for my DeWalt 7485. I laminated two pieces of plywood together, but I'm afraid that was just a little over the top. My rough board is now 2,33 inches [6 cm]. Well - wish me luck, Tachi.

[@luiztiengo1403]

BOA tarde, perfeita, eu achei que o Sr. iria deixar na cor da mesa da serra. Fantástico. Obrigado.

[@TachiOhyo56]

Olá,Luiz Obrigado por sempre assistindo Sim, acho que a cor da mesa estava boa! Meu ambiente de madeira é preparado lentamente. Obrigada

[@mariano_353]

Nice insert. What caused the blade to wobble?

[@TachiOhyo56]

Hello Mariano I met you again. The cause of the vibration of the saw blade was the wrong ring for changing the inner diameter! Thank you for coming See you

[@jpandriesse3954]

Do you now experience a difference in the material used / which one plywood, oak or pvc) do you like best?

[@TachiOhyo56]

Hello Andriesse Thank you for coming to my workshop My impression is that hard oak wood is suitable. There is no problem with each material, but my concern is the deflection of the board! A structure that does not move due to pressure from above is required. Thank you very much

[@TachiOhyo56]

Notice to my dear friend I had a reason to delay my reply to my dear friends Please forgive me, I will reply at a slow pace. Aviso ao meu querido amigo Eu tinha um motivo para adiar minha resposta aos meus queridos amigos Por favor, perdoe-me, responderei em ritmo lento. Hinweis an meinen lieben Freund Ich hatte einen Grund, meine Antwort an meine lieben Freunde zu verschieben Bitte vergib mir, ich werde langsam antworten. Avviso al mio caro amico Avevo un motivo per ritardare la mia risposta ai miei cari amici Per favore, perdonami, risponderò a passo lento. Обратите внимание, мой дорогой друг У меня была причина отложить ответ моим дорогим друзьям Пожалуйста, прости меня, я отвечу в медленном темпе. Aviso a mi querido amigo Tenía una razón para retrasar mi respuesta a mis queridos amigos Perdóname, responderé a un ritmo lento. Avis à mon cher ami J'avais une raison de retarder ma réponse à mes chers amis Veuillez me pardonner, je répondrai lentement. 私の大切な友へお知らせ 私にある事情がありました、親愛なる友への私の返信が遅れることを お許しください、私はスローペースで返信します。

[@TachiOhyo56]

Olá, Orazio Senti infinita cura e salvação nos seus breves comentários, sou profundamente inspirador e tenho orgulho de apresentar seus comentários à minha família, obrigado!

[@riccardo3213]

Che dire sei sempre una fonte di ispirazione per tutti quanti 👏👏

[@TachiOhyo56]

Ciao Riccardo. Grazie per aver apprezzato il mio video. E grazie per i tuoi meravigliosi commenti.

[@cahiteroz1921]

Is there a problem with the blade? The secretion turns. The problem may also be on the motor shaft.

[@TachiOhyo56]

Hello,Cahit Thank you for always watching I removed the standard blade and put on another manufacturer's blade, it didn't look right! ! It turned out in a subsequent check. Thank you for watching over me

[@jorgeraulsteciuk3067]

Exelente.! muy bueno..Lo voy a poner en práctica.! Saludos desde Argentina..Mnes

[@TachiOhyo56]

Hola,Jorge Gracias por mirar siempre mi video. Y gracias por el maravilloso comentario. Disfrutemos juntos la carpintería Gracias Nos vemos

[@jorgeraulsteciuk3067]

@@TachiOhyo56 tengo una sierra igual

[@guylabesseuille2716]

Beau travail et très précis. Bravo et merci pour le partage. Prenez soin de vous et de vos proches

[@TachiOhyo56]

Bonjour,Guy Merci beaucoup d'avoir soutenu ma vidéo Et je suis toujours ému par les aimables commentaires. Je vous remercie

[@fabriziofabrizi5524]

ciao Taki .bravissimo come sempre. va bene quel banco Dewolt? ciao Fabrizio Italy

[@TachiOhyo56]

Ciao,fabrizio Grazie per aver sempre supportato il mio video E grazie per i tuoi gentili commenti Stiamo risolvendo piccoli problemi a poco a poco Grazie a te

[@ralphtrites3724]

zero clearance insert + rithing knife! What happened to the gray PVC zci? Did it get painted DeWalt yellow?! Excellent as always; a true Woodworking Sensei!

[@TachiOhyo56]

Hello,Ralph Thank you for always watching my video And thanks for the wonderful comment I also liked the gray PVC beautifully, I painted it in yellow and regretted it! Thank you

[@ffff1758]

interesting, but, may I ask you what for? why three materials? wich would be the use of each one? regards

[@TachiOhyo56]

Hola,ff ff Gracias por mirar mi video Lo siento, ¡no viste mi propósito! Es solo un video hecho con los 3 tipos de materiales que tenía. Como resultado, estaba completamente satisfecho con la fuerza. Gracias por sus amables comentarios.

[@Pbkr2000]

Hello Ohyo56. Nice work. So you have 3 insert for 3 différents saw (diameter) ? Why do U make it in différents material ?

[@TachiOhyo56]

Hello,Pascal Thank you for always watching my video The reason why I made it with 3 kinds of materials is the strength, it takes a great deal of force when cutting! And as you said, I was aware of the diameter of the blade. Thank you

[@ubiratanoliveira692]

Ficou ótimo, é sempre bom ter opções e melhorar nosso trabalho e segurança.

[@TachiOhyo56]

Olá,Ubiratan Obrigado por sempre assistindo E obrigado por seus amáveis comentários

[@timflanigan8586]

I know in some European countries they restrict the use of Dado blades, is it the same in Japan?

[@TachiOhyo56]

Hello,Tim Thank you for always watching my video And thank you for your comment In my country, Japan, there are no restrictions. Very convenient. Thank you See you

[@franciscoyague4886]

Que puedo decir , un estupendo trabajo😍😍

[@TachiOhyo56]

Hola Francisco Te lo digo gracias

[@マグマジン]

やっぱりohyoさんは最高ですね＼(^^)／ そこまで綺麗には自分は作れないので弟子入りしたいぐらいです 離島なので木材を買うと送料がバカ高いので廃材を使用しているので垂直も平面も出せないので隙間なく作るのが厳しいので綺麗な動画を見せてもらえるととても嬉しいです ありがとうございます。 俺もマキタのテーブルソー欲しいてすね(^-^)

[@TachiOhyo56]

鎌ヶ迫さん こんにちは, いつも親切な有難うございます。 鎌ヶ迫さんが今の現状に満足いかなくなったのは素晴らしい事なのかもしれません！ それは鎌ヶ迫さんのスキルの向上によって小さな気になる部分に目がいく様になったと言う事です。 私もそんな訳でMakita2703に限界を感じて新しいDeWALTへ変更しました。 これからも共に木工を楽しみましょう

[@マグマジン]

@@TachiOhyo56 ありがとうございます。 とても励みになります(^^) もの作りって楽しいですよね 作る前に考えるのも楽しいです。 一度でいいから直に工房を拝見してみたいですね 勉強になりそうです。 忙しい中の返信とてもありがとうございます。

[@pierrebouquet4058]

Bonjour, Encore et toujours une amélioration de vos outils de travail, bravo? @+ pierre

[@TachiOhyo56]

Bonjour, Pierre Merci d'avoir toujours regardé Je prépare lentement mon environnement de travail du bois. Merci pour vos aimables commentaires

[@franciscoyague4886]

Que maquina tan buena , es un juguete estupendo , como disfruta de ella 😍😍

[@TachiOhyo56]

Hola Francisco Gracias nuevamente por sus buenos comentarios. Disfrutaré de este juguete en las vacaciones de mañana.

[@s.k1806]

ライビングナイフ切っちゃってる‼︎ 豪快だ🤣 私はチキンなので切断する度胸はありませんでした。 そっか、これ内径変換リングで国産ブレード使えるんですもんね。真似しよ。 それとOhyoさんの身に何かあったようで心配です。大丈夫ですか。

[@TachiOhyo56]

こんにちは。 ライビングナイフ、意を決して切っちゃいました！ いざとなったら再生します。 そうです、いまだで使った、マキタ用の内径のブレードのストックがあるので交換リング25.4→15.9を使いました。 是非お試しください。余談ですが、このDeWalt私が買った時よろ相当値上がりしました！！・・・よかった〜〜！ わたくし先日から腹が痛くて医者に行ってきました、今日は検査日です、今から行ってきます。 心配していただき、有り難うございます。 ではまた次の動画でお会いしましょう。

[@erritwilson9927]

What is your opinion on the saw?

[@TachiOhyo56]

Hello Errit Thank you for coming to my video I am very happy with this saw. The number one table saw I have ever used Thank you

[@The_Woodashians_Corporation]

That oak wood is too nice to be table saw insert ;)

[@TachiOhyo56]

Hello, Thank you for always watching Please tell me the reason, can't you use the one I made? Or can't you use the material? Thank you

[@eejuice]

@@TachiOhyo56 He said it ironically, meant as a compliment about the fine material you used. It is very difficult to successfully use irony in a medium which lacks "body language" when those communicating are not from the same cultural backgrounds.

[@TachiOhyo56]

Hello,eejuice Thank you for your kind information I am an old man ignorant of the world of the Internet and foreign cultures. I always want to appreciate and appreciate user comments. We sincerely thank you for your wonderful information.

[@The_Woodashians_Corporation]

@@TachiOhyo56 eejuice explained it perfectly! It is always strange to see piece of a nice wood as a part of some machine. It is nicer to see it as a part of some item. To us anyway.

[@НиколайТимохин-ч8о]

Отличные видео , уважаю, спасибо.

[@TachiOhyo56]

Привет,Николай Спасибо, что всегда смотрите Моя среда для деревообработки медленно готовится. Ваши добрые комментарии ободряют меня.

[@avidamente]

Hello Ohyo, you did a great job!!! Just a simple question: how did you fix the locking system? I didn't see any, in your pieces. Thanks for your inspiration!

[@TachiOhyo56]

Hello,Francesco Thank you for always watching my video And thanks for the nice comment At first, I planned to make the protrusions the same as the original, but I abandoned, I plan to attach two horns with nails or screws in the near future. Thank you See you

[@idaubney]

Thanks so much for creating this video. This is something I need to do with my saw soon and you again have given me inspiration. Thank you ohyo56 👌🏻

[@TachiOhyo56]

Hello,Ian Thank you so much for supporting my video Thank you for your wonderful comment I got another safety. Make a nice plate too Thank you

[@dominique1801]

bonjour mon ami, bravo !!!! beaucoup plus sécurisant ces inserts 👍 👍 👍

[@TachiOhyo56]

Bonjour,Dominique Merci d'avoir regardé ma vidéo Oui, c'est très sûr et pratique car je coupe souvent des planches minces. Profitons du travail du bois avec vous! Je vous remercie À bientôt

[@fishinghut]

お見事‼😻

[@TachiOhyo56]

有り難うございます＾＾

[@norik122]

Полезное видео, приятно такое смотреть!

[@TachiOhyo56]

Здравствуйте Александр Спасибо за постоянную поддержку моего видео Теперь вы можете делать безопасную работу. Спасибо за ваш хороший комментарий

[@EDDYGARAGEShop]

Ohyo-san Nice work as always 😊👍🏼 Love your dewalt, Hope i can have one too, soon.

[@TachiOhyo56]

Hello,EDDY Thank you so much for supporting my video And always thank you for your nice comments. As you say, there are so many KZbin creators of DeWALT users! ! Hurry up and join us. Thank you

[@NorimarMoreira]

Parabéns pelo capricho!

[@TachiOhyo56]

Olá,Norimar Obrigado por sempre assistir meu vídeo E obrigado pelo seu comentário Reparar isso deve fazer um bom trabalho, talvez! Obrigado

[@monomax33]

какая модель станка ? Вы ставите 216 диск . у меня DeWALT 7485 ? но диск 210. which machine model? You put in disc 216. I have a DeWALT 7485? but disk 210.

[@TachiOhyo56]

Привет андрей Спасибо за просмотр моего видео Я купил DeWalt 745, инструмент низкого уровня. Я использую лезвие 210 потому, что оно может плавно резать твердую древесину. Спасибо

[@monomax33]

@@TachiOhyo56 я своей пилой доволен , даже со штатным диском рез очень чистый , а дуб 50-ку режет как масло . 5500 об .мин. стол идеально ровный , правда немного маловат , но не беда .

[@АлександрВладимирович-к2р]

Отлично, впрочем как и всегда) 👍👌.

[@TachiOhyo56]

Привет,Александр Большое спасибо за поддержку моего видео И всегда спасибо за ваши замечательные комментарии.

[@elyr.9841]

Come Sempre Un Gran Bel Lavoro👏👏👍 Molto Preciso ed Utile👌👌😜

[@TachiOhyo56]

Ciao,ELY Grazie mille per aver supportato il mio video Ho un'altra sicurezza. Grazie per il tuo bel commento

[@andrecastro8367]

Não entendi ele colocou um disco de 254mm foi isso ? Pelo de 250mm

[@TachiOhyo56]

Olá andre Obrigado por ter vindo ao meu workshop A lâmina fabricada no Japão tem um diâmetro interno de 24,5 mm! Você precisa de um anel de 15,9 mm que atenda aos padrões americanos! !! Estou ansioso para trabalhar com você no futuro Gratidão e amizade do Japão

[@ArturoMendezC]

Muy satisfactorio ver estos videos me gustan!

[@TachiOhyo56]

Hello,Arturo Thank you for always enjoying my video and for your wonderful comments. Please continue to be my supporter

[@norbertoluisgarcia]

Buenos complementos ,te felicito, y gracias por compartirlo, abrazo.

[@TachiOhyo56]

Hola,norberto Muchas gracias por apoyar mi video. Y siempre gracias por tus lindos comentarios. Lo primero que debes hacer por seguridad Gracias

[@johnc6339]

Update your DeWalt with a Makita blade? 😁Nice work.

[@TachiOhyo56]

Hello,J C Thank you for always watching my video And thank you for your comment There are several spare blades for Makita, which can be used with the conversion ring from 25.4 to 15.9. Thank you See you

[@ssschuh]

Very precise work. I wonder why the scary saw oscillation when cutting the plywood piece.

[@MarkMcCluney]

Yes, what is happening there?

[@TachiOhyo56]

Hello,ssschuh Thank you for watching my video and nice comment At this time I replaced the blade with Makita, I could not install it correctly, which caused the blade to rage and widened the gap between the plywood and the blade. Thank you See you

[@TheFeyling]

As always neat and inspirational!!

[@TachiOhyo56]

Hello,Fredrik Thank you for always watching my video And thank you for your nice comment. From now on, safety is increased by one. safety first! Thank you

[@RayZde]

blade looks like its wobbling.

[@TachiOhyo56]

Hello MC Thank you for watching my video. Yes, only then the blade trembled, then quickly corrected.

[@hotfelipehot]

Muito bom, Mestre! Um forte e fraterno abraço do Brasil.

[@TachiOhyo56]

Olá,Hot DJ Muito obrigado por apoiar o meu vídeo E sempre obrigado por seus comentários maravilhosos. Obrigado pela amizade do Japão

[@tionolotv]

Muy bueno ,hay varias ideas muy interesantes.

[@TachiOhyo56]

Hello,tionolo Thank you for always watching my video The first requirement of this project is material strength! And some structure and challenges remained. Thank you for your nice comment See you

[@SiamWoodShop]

Great idea, job well done.

[@TachiOhyo56]

Hello, John Thank you so much for supporting my video And always thank you for your kind comments.

[@MrWojpen]

Awesome as always Mate 😁

[@TachiOhyo56]

Hello,Wojpen Thank you for watching my video and for making nice comments. You are my good supporter

[@ranulfosabino7285]

Mas porque ele fez outras se a que tinha era boa ????

[@TachiOhyo56]

Olá,Ranulfo Muito obrigado por apoiar o meu vídeo Para dizer a verdade, o erro de precisão de suas várias partes agora é visível para meus amadores, então mudei para uma nova ferramenta, Makita cuida dos amigos locais. Eu vou usá-lo. Obrigado por seus amáveis comentários

[@TheMikelKatzengreis]

Hallo nach 日本 (Nippon) ! wieder eine schöne & genaue Arbeit ! Dann klappt es auch mit dem Sägen von ganz dünnen Leisten besser ;- )

[@TachiOhyo56]

Hallo, Mikel Vielen Dank für Ihre wunderbaren Kommentare Und danke, dass du es mir erzählt hast Wir sehen uns

[@slavkochepasov8134]

4:38 what kind of glue did you use?

[@TachiOhyo56]

Hello Slav Thank you for watching my video This is an instant glue.

[@ianlogan9415]

No lock to stop the plate from rising?

[@TachiOhyo56]

Hello, Ian. Thank you for watching my video. It's in the storeroom, maybe! But I don't like that part. Thank you for coming.

[@johngrace199]

Curious...why did you use the original insert as your template? Were you concerned over damaging it?

[@TachiOhyo56]

Hi John Thank you for watching my video The reason is that the original insert has a large gap and is not tight! I took a pattern with a pencil and scraped the outside of the pencil mark. Thank you for your comment See you

[@johngrace199]

@@TachiOhyo56 Makes perfect sense...very nice job on the insert as well as some of your other videos. I just discovered your channel this morning. cheers...

[@weekendwarrior9570]

Excellent. Thanks for sharing

[@TachiOhyo56]

Hello Weekend Warrior Thank you for coming to my workshop again Let's enjoy woodworking together See you again

[@jimmydickson8854]

Why dosnt dewalt make a zero clearance insert

[@TachiOhyo56]

Hello, Jimmy Thank you for coming to my workshop DeWalt is not the only one that does not have a zero clearance insert as standard equipment. The reason is to reduce the cost by using both 90 degrees and 45 degrees! That's why many people make homemade zero clearance inserts. Thank you See you

[@Shineysideup1]

Very nicely done

[@TachiOhyo56]

Hello,U Thank you for always supporting my video And thanks for the nice comment

[@СергейВасиленко-в8л]

Приветствую! Спасибо за видео. Даже к dewalt можно и нужно приложить старания! Надеюсь, что у тебя всё хорошо. С уважением.

[@TachiOhyo56]

Привет,Сергей Большое спасибо за поддержку моего видео Спасибо за ваш добрый комментарий на днях. На самом деле, я пошел в больницу для тщательного осмотра, первый прошел, завтра второй, удачи Здоровья вам и счастья из Японии. Спасибо

[@Painless61]

Danke für das Video 😉👍🏽

[@TachiOhyo56]

Hallo,Joe Danke, dass du immer zuschaust Und immer nette Kommentare

[@duczman76]

do you have the dwe 7492 or another model

[@TachiOhyo56]

Hello duczman Thank you for coming to my workshop And thank you for your comment I don't have information on another model, sorry. Thank you

[@duczman76]

@@TachiOhyo56 hi,i asked if u have the dwe 7492,because thats the table saw i have and if this throat plate also fit it.

[@TachiOhyo56]

@@duczman76 Hello My table saw is DW745, the standard is the same as Dwe 7492, maybe! !!

[@duczman76]

@@TachiOhyo56 the 7492 have a 10"blade and i don't exactly know the measurements of my insert plate in inch,but the thicknes is 1/2 " or 12,5mm.i'm from germany and we use the metric system.i will make a template if i have some 1/2" plywood in my scrapbox.unfortunately here in germany dewalt don't have throat plates in the assortment here.

[@elexandrepadoan7089]

Hoje a melhor serra de bancada do mercado, ficou bom más totalmente desnecessário , ainda cortou uma peça original da máquina!!

[@TachiOhyo56]

Olá, Elexandre Obrigado por assistir meu vídeo E obrigado pelo seu comentário Um vírus parou minha oficina! muito solitário···· Obrigado Até logo

[@victorven6834]

Хорошо! Вы себе не изменяете)

[@TachiOhyo56]

Привет,victor Спасибо, что всегда смотрите Я готовлю свою деревообрабатывающую среду в медленном темпе. Конечно, я не буду менять свой стиль Спасибо за ваши добрые комментарии

[@purboid]

what's actually size diameter arbor Sir?

[@TachiOhyo56]

Hello Caraku Welcome to my workshop. I'm sorry, Google Translate doesn't work well for your comment, please reply again with a different expression, please.

[@purboid]

@@TachiOhyo56 how many arbor holes in mm??

[@TachiOhyo56]

@@purboid Which hole is "arbor holes"? A hole for hooking your finger? I'm sorry, ignorant!

[@purboid]

@@TachiOhyo56 I mean holes axis of blade

[@TachiOhyo56]

@@purboid DeWalt genuine blade is 16mm It took time to solve it, see you

[@LanceMcGrew]

Or just buy one on Etsy for $18+ and save a whole bunch of effort

[@TachiOhyo56]

Hello Lance Thank you for coming to my workshop. And thank you for your kind comments. I am an old man who enjoys woodworking every holiday, and I also like to spend time on woodworking. Thank you Lance ・ ・ ・ ・ Tachi

[@いっぱちくん-u7c]

おつかれさまです 新しい道具を　ああしよう　こうしようと 形になっていくといいですね どこまでバージョンアップしていくのでしょうね ｗｗｗ

[@TachiOhyo56]

こんにちは、 さすが、いっぱちさん、それがこれからの私のやるべき事です。 しかし、過去の既に済ませた動画とダブりますのです、動画にできない物もあります・・・ できるだけ私にとっての理想に近づけるかです。 これからも気を引き締めて安全第一の遂行していきます。 有難うございました。

[@ruimartins4868]

Sehr gut 👍🏻 ⭐️⭐️⭐️⭐️⭐️

[@TachiOhyo56]

Hallo Rui Vielen Dank für Ihre netten Kommentare Von diesen dreien war die PVC-Platte die schönste. Ich mag es sehr. Danke

[@mikamajlund3622]

Why did you meade 3 ?

[@TachiOhyo56]

Hello, Mika Thank you for watching my video And thank you for your comment I always try and error, the purpose of these 3 materials is testing, especially strength and cost ... strength is all 3 passes, cost is of course veneer Me and you are woodworkers, Thank you See you

[@alanamorim8559]

Compensado (plywood) de 10 mm?

[@TachiOhyo56]

Olá,Alan Obrigado por assistir meu vídeo E obrigado pelo bom comentário, Sim, é contraplacado de 10 mm, 10 mm pode ser feito sem ajuste. Obrigada Até mais

[@alanamorim8559]

@@TachiOhyo56 Ótimo! Vou fazer na minha dw745

[@miguelgonzalezhernandez57]

Espectacular, 👌

[@TachiOhyo56]

Hola,Miguel Gracias por mirar siempre mi video. Y gracias por el maravilloso comentario,

[@СергейХомицкий-в1я]

По русски - это три П: Просто, Понятно, Полезно.

[@TachiOhyo56]

Здравствуйте Сергей Спасибо, что всегда смотрите мое видео Понятно! Удивительно! Спасибо за хороший комментарий,

[@Homeworkshop_Evgeniy]

Всем привет! Не совсем понятно, объясните пожалуйста зачем разные вкладыши ? Просто я тоже заинтересовался деревообработкой, буду рад пояснениям и советам!

[@СергейХомицкий-в1я]

@@Homeworkshop_Evgeniy заводской при активном использовании - вообще не жилец. А это просто примеры, как из подручного материала изготовить комплектующую. У кого, что под рукой (в быту - ЧПР) - из того и делать. На мой взгляд лучше всего - армированный текстолит. А это популярно показан технологический процесс. Решпект мастеру за хлопоты!

[@luiztiengo1403]

Sim, devagar e sempre!! Bom dia!

[@TachiOhyo56]

Olá,Luiz Sempre obrigado por seus comentários gentis e gentis

[@44matos]

Bom trabalho, abraço.

[@TachiOhyo56]

Olá,Antonio Obrigado por sempre assistindo Obrigado por seus amáveis comentários

[@hassanal-mosawi6049]

Thanks for sharing that

[@TachiOhyo56]

Hello,Hassan Thank you for always watching

[@ASCarvings]

Perfection

[@TachiOhyo56]

Hello,Anthony Thank you so much for supporting my video And always thank you for your wonderful comments.

[@-ZIO]

Nice :)

[@TachiOhyo56]

Ciao,Zio Grazie per aver sempre guardato il mio video E grazie per il bel commento

[@Setimusas]

Muito bom

[@TachiOhyo56]

Olá,gonçalo Obrigado por assistir meu vídeo! E obrigado pelo bom comentário Vou continuar me esforçando para fazer bons vídeos. Obrigado Até mais

[@Лівак-ж5и]

👍

[@TachiOhyo56]

Привет,ЛЕВША Спасибо за просмотр моего видео Вы и я оба любители деревообработки! Спасибо Увидимся

[@Лівак-ж5и]

@@TachiOhyo56 буду рад подписке на мой канал!

[@TachiOhyo56]

👍

[@michaelkehrle3244]

❤️

[@TachiOhyo56]

Hallo,Michael Vielen Dank, dass Sie sich mein Video immer angesehen haben❤️

[@kmhui2749]

1

[@TachiOhyo56]

Hello,KM Thank you for always watching my video And thank you for giving me one Let's enjoy woodworking together Thank you See you