4 axis Substitutions_Pocket Toolpath MasterCam

[@billrieck4910]

Do you have the multi axis license when doing this job? When you ran it did all the axis’s move at the same time?

[@cncmachinebear1636]

Exelente video saludos ✌🏻

[@designinnov.engineering]

Thanks

[@jlb0077]

How do you get the material to rotate in simulation vs the tool moving?

[@mikewatson5281]

i am milling a part on a 4 axis rotary using the side of an endmill, because Y isnt in use when it machines radius's it goes point to point and leaves not so good finish, is there a way to make the points closer together?

[@ehdrmfm]

Hi Thank you for the video. I have a question. Is there a way to process the shape of a circle in 4 axes in modeling? (Excluding the roll function on the go menu)

[@designinnov.engineering]

Yes, there are other process

[@ehdrmfm]

@@designinnov.engineering Thank you so much for answering. I am desperate for the process. Could you possibly upload a video? The model you really want is a mask roller Is that function parallel processing in the multi-axis menu?

[@designinnov.engineering]

Ok

[@ashishdhiman7278]

Great tutorial. Due to no explanation verbally about what are you doing and why are you performing this way. It become hard to understand although, we were able to get some points of your way. You did best, we the 4th axis programmer are thankful to you for this upload. Can you upload a tutorial where you can show us. How to select multiple number of pockets whether it's open or close with ramp entry?? Pockets are in zigzag way not linear pattern. And selection of those pockets must be in easy way. Like select one pocket and all the other pockets on surface also get selected at once. Best of luck buddy. You did great👍🤞

[@md8744]

So may I ask you please. Once we have model we go ahead click directly on model wire frame then ok right? Don't need to roll xform into 2D anymore!!!

[@jerryyang2202]

Great video, one question about the creation of the 3D model for cutting, how can we draw the pocket ?, because the edge surface of the pocket is aligned to the axis center, how can we draw it? Thanks

[@DanushkaRanasinghe-jl5md]

Same issue for me .... can anyone help me out

[@DanushkaRanasinghe-jl5md]

Same issue for me .... can anyone help me out

[@hamedhamedi2118]

Hi. How au you? Please teach me four axis rough in powermill. Thank you

[@AlexeyPetrov-p3n]

Hello, how do I create a part outline?

[@cncandcinema4545]

I NEED MORE SOLIDCAM MULTIAXIS PROGRAM.

[@giribabu6458]

Sir if you give step file. It will be helpful to practise it

[@arkarmyint4958]

Sir, can you give me a part file for mill and turn 2, 3, 4, 5, axis

[@dhanasekare3491]

Sir please explain ramp milling option in angle holes or any other options in angle holes continues cut in angle holes please explain this one it's very useful for me please iam waiting for your reply

[@vasavarajni5687]

ye drawing banane ki command

[@mikewatson5281]

hard to follow this video

[@designinnov.engineering]

Ok

[@Tuongcamcnc]

Gà quá