4 Cyl Honda Very Common Low Fuel Pressure

4 Cyl Honda Very Common Low Fuel Pressure
In this video I have a 2014 2.4 Honda Accord with a stored P0087 code. There is a TSB for this specific vehicle and this code, that is to replace High Pressure Fuel Pump. Repair info for this job has you taking a part way too much stuff and will take you a lot longer then needs to be. I will show you how to make this repair properly and in a lot less time. Let me show you how to get this job done quickly.
HERE IS A LINK TO MY AMAZON INFLUENCER PAGE WHERE I LINK SOME OF THE PRODUCTS I RECOMMEND.
www.amazon.com....
The Amazon links are a paid partnership with Amazon.
Find me here:
beacons.ai/nut...

[@isabelnayet3514]

Hi! My Honda accord also has this code and the vsa brake actuator malfunction code . It take a couple of seconds for the engine to turn over and I cannot accelerate normally in my vehicle , it took a minute and a half for it to go from 60km/hr to 100km/hr. 😅getting nervous

[@NutsandBoltswithTone]

That sucks sorry to hear. You should fix it soon or you will be stuck. Thanks for watching

[@mexdrago3009]

​@NutsandBoltswithTone Thanks for the video. I was tempted to replace the mete fuel then said, "Hell no, I aint doung that. lol I fixed it yesterday.

[@HtownRO]

GREAT VIDEO ❗❗❗❗

[@NutsandBoltswithTone]

Thank you I'm glad to help. I appreciate ya watching

[@GiftedHandsAutoRepair]

Thanks for your video, I have a 14 Accord Sport 159K with P0087 code, I replaced the high pressure pump without removing intake or replacing that high pressure fuel line without any problems I cleared the code and car is running fine. I saved $260 by ordering from Honda online instead of purchasing from from my local Honda dealership, just had to wait for delivery, It was worth the wait.

[@NutsandBoltswithTone]

Great job and that is awesome getting it cheaper. I did not remove intake manifold either. Thank you for watching.

[@jplays4788]

where did you buy the part and what is the price thank you I hope and you answer me

[@NutsandBoltswithTone]

I am sorry but I do not deal with cost of parts. I know we got it from Honda. It took 2 weeks for it to get to the shop. Thank you for watching.

[@darlinlubin7396]

I have the same code poping up change this same up and it's still losing power could that because of the timing jump ?

[@hypnoticimage9687]

I just did my fuel pump a week ago for the P0087 code but I was just randomly checking on maintenance on 9th gen accord for engine carbon cleaning and I read somebody comments that they didn’t even need to change the fuel pump. They just did a throttle cleaning and the P0087 clear without replacing the pump. They use CRC throttle cleaner. I wish I try that before I replace my fuel pump. I did mine about for around $400, $ 150 for parts(eBay). And the rest is labor. I prob got cheated on labor but whatever my car is fine now. Better than $2k the dealership quoted. Up to you try, cheapest option before you do anything more. Lots of KZbin video on how to do the cleaning for carbon deposit.

[@NutsandBoltswithTone]

What brand pump did you put in? Thanks for watching.

[@NutsandBoltswithTone]

P0087 code does not have anything to do with carbon up valves. There is a sensor for high pressure fuel and if the fuel pressure is not where it should be then it sets the code. Thanks for watching.

[@trentshook09]

how do you tell there if is a leak?

[@NutsandBoltswithTone]

Well if it's an external leak it will be very noticeable. The only other leak could be an injector leaking and that is a much different approach. Thanks for watching.

[@alexisgodinez280]

Whats up brother . I replaced my fuel pump pressure with an off market brand . My car runs but once it runs for over 100 miles per hour my car losses that horse power . I have code p0420 code and I also replaced the cat converter . What do you think I should do ?

[@NutsandBoltswithTone]

I am not sure at the moment. You can message me on Instagram

[@ToolDemos]

Good job beating the book Tony. You always have really good tips.

[@NutsandBoltswithTone]

Thank you Steve I appreciate that. I generally almost always beat book time. I appreciate the compliment and for watching.

[@brianleon7438]

Thanks. Just saved me clearly 1k in labor from what a shop quoted me. Did the install in about 2 hrs.

[@NutsandBoltswithTone]

Sweet I am very happy you came across my video and that it helped you that is awesome. Thank you for watching

[@ProsperingNerd808]

Do you need to purge the fuel line before you remove the fuel pump?

[@NutsandBoltswithTone]

@@ProsperingNerd808 no you don't

[@ProsperingNerd808]

@@NutsandBoltswithToneok thanks! I was worried it’d spew out gas or something.

[@mariolewin7137]

Thank you for the video. Headed to the shop to do this job on 2015 CRV 2.4 l. Just curious why do they want you to set the engine tdc? What is the purpose of that just for my knowledge?

[@NutsandBoltswithTone]

Seeing engine to TDC is supposed to make it easier to get high pressure pump down while fighting spring tension and the cam lobe. Thanks for watching

[@Duhvidd]

Just what I was looking for! The factory service bulletin calls for intake removal, timing the engine and replacement of all hard lines! I could understand for Honda just replacing it because for them the hard lines are Pennies on the dollar, but the fuel hard line sold by them for consumers is over $150, ridiculous! Thank you for simplifying the process and literally cutting the time of repair in half! 👍

[@NutsandBoltswithTone]

You are very welcome. To be honest almost every manufacture requires replacing all metal fuel lines in the high pressure system that get disconnected but most of the time replacing them is not actually needed. I appreciate you watching.

[@l.ro.2562]

I have the same problem, I replaced the pump already but my problem came back . What else should be done in this matter. I would greatly appreciate the comments

[@NutsandBoltswithTone]

That is a bummer, sorry to hear. First question is what brand of fuel pump did you use? Second is how is the low pressure fuel system and fuel quality? If fuel quality is bad or low pressure system is not bringing adequate fuel to high pressure pump then it will not work properly. Thanks for watching.

[@danielbautista4355]

I have the same problem I replaced both pumps rail sensors low pump sensors to A need program the PCM or ECM

[@danielbautista4355]

You find the problem

[@danielbautista4355]

You find the problem

[@yung_vrat]

Hello, I’m having issues. Would you mind providing advice? My fuel pump rattles at the start of the car, and then enters limp mode.

[@NutsandBoltswithTone]

I am not sure about that.

[@kevinavelar3384]

What is the fuel level percentage with new pump installed? And where is it above 3 percent? I’m sorry my eyes couldn’t catch what I was seeing

[@NutsandBoltswithTone]

I am not sure actually, I trust the process by following flow chart and once I have deemed the high pressure fuel pump failure I roll with it. Thank you for watching. If you have more questions hit me up on Instagram.

[@TurboTyTy]

Pretty cool showing how to do it without removing the intake manifold 👍🏽

[@NutsandBoltswithTone]

Thank you very much, I appreciate you watching.

[@joshrichards1305]

Really late to this video, but would this be about the same process for a 2016 Honda Accord Sport? I don’t know what I’m doing but I don’t want to spend 1600 for a repair lol

[@NutsandBoltswithTone]

Message me your vehicle info on my Instagram and I can look it up. Thank you for watching

[@xAguilaz14x]

My 2019 Honda Accord just got this problem and doesn’t turn on at all. Do you think it’s the fuel pump since it already had a recall

[@NutsandBoltswithTone]

Does it crank over or not crank? Message me on Instagram and I can help you out. Thanks for watching.

[@MrLevi136]

Great video and Im trying to locate and understand how PCV and EGR valve works on this particular engine. Where are their hoses and in which direction vapors or fresh air is moving. At 2:30 you pull the PCV hose from the main air tube. In that hose fresh air is going toward the valve case and PCV valve or vapor is coming from the crankcase thru the PCV valve? Where is the EGR valve located on this 4 cyl Honda? Thank you for your time.

[@MrLevi136]

Great video and explanation.

[@NutsandBoltswithTone]

I am not sure where the EGR valve is or if it even has one. As far as the PCV it flows from the intake air tube to the intake. Thanks for watching.

[@jdduran582]

I have a 2018 Honda accord sport , and got that code would it be the same process?

[@NutsandBoltswithTone]

Most likely, but I cannot look it up as I am not working until March, at home with sprained ankle. Having surgery this Thursday. Thanks for watching.

[@JayMaurice33]

You sir helped me so much with my diagnostic, repair and fix of my Honda Accord. This did the trick.

[@NutsandBoltswithTone]

Thank you very much for watching I am very happy my video helped you out.

[@HtownRO]

What was the torque spec for the high pressure fuel line nut⁉️

[@danielbautista4355]

I have the same problem i replaced the pump already but the problem com back i get that pump to eBay and I need it program the PCM or ECM 🙏👍 thanks

[@NutsandBoltswithTone]

That is the problem with getting cheap parts is you do not know if the part is the problem or if you had a different problem. Sorry you are having trouble. Thanks for watching.

[@danielbautista4355]

Thanks 😢

[@joebagofdoe4762]

Amazing video Thank you Keep em coming!!!

[@NutsandBoltswithTone]

Thank you! Will do!

[@danielle8063]

Hi could anyone help me my cars spluttering and back firming at 3000 rpms and some times it clears up things I have changed on the gti is hpfp and fule pump In side the tank fule sencer spark plugs cam shaft sencer but when I un plug it it runs better don't no what's wrong with it its doing my head in comes up on diagnostic low few pressure and I got anti pollution failure please can anyone help put loads of money in to this

[@NutsandBoltswithTone]

Sorry to hear you are having problems. If you message me on Instagram I can try to help you.

[@danielle8063]

BTW my car is a 207 gti thp175

[@andrewgambon1079]

Hey @danielle8063 , what did you figure out? I’m having the same symptoms and have already replaced both the hpfp and the one in the tank. Same stall at 3000rpms, and vsa malfunction… Any help would be appreciated!

[@lesthersanchez2640]

Do you have to change both gas pumps or just this one

[@NutsandBoltswithTone]

Well first thing you have to make sure of is that the low pressure pump is working properly, if the low side pump does not bring proper fuel volume to the high pressure pump then the high pressure pump cannot work properly. Also the quality of the fuel has to be good. Thanks for watching.

[@jplays4788]

hello brother I have that same code with a 2016 honda accord it takes a few seconds to turn on but when I want to accelerate the car it does not go more than 35 miles per hour and the engine jumps, the problem will be the high pressure fuel pump I await your response thanks

[@jplays4788]

but the strangest thing is that after three days the car returned to normal and now it is running fine

[@NutsandBoltswithTone]

Honda states make sure there is a decent amount of fuel in tank and if you have this coffee the pump is the problem. Thank you for watching

[@dant3113]

My 2015 Accord has the same problem and won't go uphill more than 35mph. Also all my dashboard lights came on not sure if it's all related. FCW system failed, LDW,

[@billbeckett1021]

My only question is how did you figure this out the first time ever doing it? Not removing the intake must save quite a bit of time. Awesome vid!

[@NutsandBoltswithTone]

I actually only look at the manufacture procedure as an overview and look to see what I really need to do. The whole job did not take super long even with filming for the video. Thank you for watching. I appreciate it.

[@FreddieSodium]

Could low oil level inadvertently trigger this code? I figure since the pump is driven by a cam, under acceleration with a lack of oil pressure could trigger the code due to actuators not operating properly leading to this condition? Have a CRV with same code and The engine is very low on oil.

[@NutsandBoltswithTone]

No it shouldn't. This code is set by actual fuel rail pressure not being where it should be. Thanks for watching. Hit me up on Instagram if you have any further questions

[@FreddieSodium]

@@NutsandBoltswithTone Thank you for the quick response Tone!!! I've come to this conclusion because hondas will sometime trigger a Rocker Arm Actuator DTC due to low oil level. So Im led to believe that if the actuators are not phasing the camshafts properly or "on time" I can imagine that the performance of the fuel pressure would lag behind if the car is calling for timing advance and the actuator unable to keep up or lag behind. I could be way off a few years of experience as general service technician. thank again. having a moral dilema thinking we are sellnig a pump as opposed to doing an oil change clearing the code and seeing what happens. howver I dont think fuel supply is something to send the customer off with just an oil change. maybe freeze data would tell more.

[@NutsandBoltswithTone]

@@FreddieSodium the high pressure fuel pump runs off direct camshaft, not variable cam. The variable aspect of the camshaft has nothing to do with direct cam.

[@vergatronik]

@@FreddieSodiumI’m my doubts about too. I got a Honda fit and I was driving with low oil and when I put new one started my problems. Now my car take long to get potency running and gave me smog in the first turn on by the mornings

[@JohnMarraynthm]

I could not have done this in 3 hours without this video. I could not have done it at all. Thanks for such a detailed instruction video.

[@NutsandBoltswithTone]

Hey there I am very happy my video helped you out. Glad it all worked out. Thank you for watching.

[@CarlosFongujo]

How would you look up the tsb ma duel and determine if it’s over or under 3% ? Please help

[@nolimit8540]

Hey I need some advice my fuel pump went out I changed it and my car will drive but will go into limp mode if I try to drive normal idk if it’s the fuel pump I bought or if I’m missing something when car goes into limp mode when I try to go higher in rpm’s code reader still showing p0087 what do you think I should do ?

[@NutsandBoltswithTone]

Do you have any codes? Message me on Instagram. Thanks for watching

[@brandonvillanueva1926]

Same thing happen to my car it’s weird that your saying it’s discontinued because Honda order both parts for me but I’m gonna have to wait 3 months for the part to come in

[@NutsandBoltswithTone]

I recommend parts to do the job and only know what my service advisor tells me. Are you waiting 3 months for the fuel pump or the line? Thank you for watching.

[@brandonvillanueva1926]

@@NutsandBoltswithTone I’m waiting for both parts it was a estimate how long it would take

[@NutsandBoltswithTone]

@@brandonvillanueva1926 oh ok. I think I had to wait a couple weeks to get the pump from Honda when I did it.

[@brandonvillanueva1926]

@@NutsandBoltswithTone I hope it comes in soon they gonna call me Tuesday with another estimate 🙏🏻🙏🏻

[@NutsandBoltswithTone]

@@brandonvillanueva1926 good luck

[@fixitallpaul4847]

Why would they want you to replace that fuel line?

[@NutsandBoltswithTone]

Because it is a high pressure fuel line. If the line does not mount back up exactly where it then it will be a leak. Every high pressure fuel line that gets disconnected is supposed to be replaced but we are not doing this much anymore.

[@fixitallpaul4847]

@@NutsandBoltswithTone The quality in hoses is much better than once upon a time. I sound like an old guy.

[@NutsandBoltswithTone]

@@fixitallpaul4847 is because it is such high pressure that it would be a massive leak

[@solflores9649]

No tdc needed ??

[@NutsandBoltswithTone]

No it just rides on a cam lobe. You just need to put pressure on pump holding it down while you tighten the bolts. Thank you for watching.

[@Thecargohustler]

I appreciate it

[@NutsandBoltswithTone]

Thank you for watching.

[@repairyourpc1623]

Watching

[@NutsandBoltswithTone]

Thank you.

[@susiealamillo5140]

Is that from honda dealer

[@NutsandBoltswithTone]

Yes we bought it from Honda. It took a week or two to get though

[@susiealamillo5140]

@@NutsandBoltswithTone I couldn't get anyone to help me I just had to get it towed to honda

[@mexdrago3009]

I need to replace mine now. Its on back order and cost up to 800.

[@NutsandBoltswithTone]

Being on back order sucks. Thanks for watching

[@johnnyramirez9082]

Very nice work

[@NutsandBoltswithTone]

Thank you very much I appreciate it, I also appreciate you watching the video.

[@armanmalik3577]

Bhai Hindi me dedo video

[@NutsandBoltswithTone]

I do not speak that language I am sorry.

[@rajeshgurung8328]

Lol, he said make a video in Hindi (Indian language) 😅

[@NutsandBoltswithTone]

@Rajesh Gurung yeah I cannot do that sorry

[@onesuzee8314]

Wht does a part like that cost. ? And does it need to be from the Honda factory ????

[@NutsandBoltswithTone]

I actually do not know the cost, I do not see any dollar amounts. We only put in Honda but I had someone recently message me about similar issue and he put in aftermarket one. Thank you for watching.

[@l.ro.2562]

What is your instagram sir

[@NutsandBoltswithTone]

Nuts_n_bolts_with_tone