4 GIANT Motors in RC Car - 1st Run (did not expect this to happen)

[@biaggi150]

I can’t imagine the reality being more different from the promise of a new RC!! Looked amazing, actually a POS! Entertainment value off the scale, thanks Kev and crew!!

[@CamCakes]

I mean, it seems that the material they used wasn't strong enough to handle the raw torque and power!!!

[@marcoreviews]

It needs some DJI cyber nanny calibration lol 😂!

[@dawsonmobley]

Looked like whatever method they used to keep the tires from expanding at speed failed miserably 👍. The wheels seem to be to fragile to stand up to normal use,much less any abuse.

[@sullythepankake9663]

They sent the car out with 3d printed wheels lol if they had real wheels and had enough clearance between the underbelly it would've been fine.

[@stevezimmerman5644]

That thing is awesome Kev. It's redefined the hobby. No longer do you have to go fast or bash a RC car for it to explode it does it first time you touch the throttle! Major timesaver. Makes Stemp a bit redundant though, replaced by a machine that destroys itself, sorry Stemp, you have been made obsolete! That's 2022 for ya!

[@rcloadout8357]

🤣🤣

[@Wolflly-1999]

🤣

[@davidbrown5557]

That car reminded me of Jackson storm Until it blew up of course super glad I did not spend a Dime on that vehicle thanks Kev.....

[@Nordlicht05]

ok wich manufacuterer makes the biggest boom when flooring it is the new contest.

[@davidclark2702]

This comment cracked me up! 🤣

[@Netbug]

I come back to watch this every couple of months, it's so funny.

[@volvo09]

Same, this is gold! 😂

[@Rek_Rc]

The car did nothing, and yet was still the most spectacular rc I've ever seen in action. Wow what a showing, and just when I started to think 1500 dollars was too expensive it really delivered the thrills. I can't wait to see someone achieve a full 14 foot speed run with it.

[@technoplex395]

XD

[@brianl8983]

The car did nothing and yet was completely destroyed

[@RCTNT]

Underrated comment, oh my.

[@chubbs6504]

Looks like junk imo

[@theonlyjasonkirk]

For once, Kev can't be blamed for destroying the car. Has to be the worst failure ever.🤣

[@kneckel]

welllllllll it is the same wheel he unscrewed 😅

[@zaiizaii4669]

it's not his fault the car is not durable and it has too much power

[@johnalenwork53]

Sad but Agreed

[@dnafpv]

@@kneckel and two that he didn’t if you actually watched the vid…

[@Hamzamakesfunvideos]

I feel so bad for him!!!

[@matthewbernard4152]

I’m in shock...... it’s as if they never even drove the prototype much less the final model before shipping them out. It’s absolutely gorgeous but that is the equivalent of a show car prototype. Never goes over 10 mph trailered from garage to show and back lol this is a lovely desk or shelf model

[@gordonbyron5145]

yeah my thoughts exactly lol

[@mankind8088]

Yep bragging rights only

[@Patrik2166]

Except they did... Kevin just bashed on the car for clicks... He single handedly killed their business

[@spec_opsgaming]

@@Patrik2166 except he didn't do his normal bashing, he was actually going really easy on it, and it literally just crumbled. He didn't destroy their business, he showed his audience how crap the product was even if by accident.

[@mech0p]

@@Patrik2166 they killed their business. He didnt do anything crazy and all of this should of been sorted out before they even sent it out. Plus who tf sends out a prototype? Also they said they wouldnt send anymore stuff to youtubers and do their own testing when they should of fixed it and sent it back to kevin to test again which would have restored peoples faith in the business. This is 100% their fault and he had every right to bash it when it broke before even driving it and then shattered on the first turn.

[@OGs_Playground]

Kev, this is where your value to us and the hobby really shows up. Nobody that watched this absolute catastrophe will buy this car and make the same mistake. 'Preciate you Pal 🤙🏼

[@Kalbo32MM]

@@tylerseabook9423 bashing... are you serious. The thing exploded at under 10 mph on moderately flat ground. The fact that it exploded on his work bench should show you how brittle the parts are on this thing. Potential is there if it's made from the right material.

[@OGs_Playground]

@@tylerseabook9423 Dumbest thing, really? Looks to me like the tire expansion happened on the stand before any bashing occurred. So angry. You really should get laid more. Step out behind that keyboard fella.

[@somerandom7215]

@@tylerseabook9423 Not been on the internet long if that's the dumbest thing you have ever read. Agree with the rest though.

[@FrequentFlyerRC]

@@tylerseabook9423 What do you mean?? The tires would have "ballooned" regardless of where he had driven it! Just looks like the company never tested what would happen at high speeds! How does your comment explain the incident of the tire ballooning on the bench breaking the spoiler? 🤷 💩

[@blainesworld6404]

Well the God news is that only 25 were made. So I think we are good

[@CrackedCogInTheMachine]

I wouldn't even bother with that thing, lost cause without some substantial upgrades. The moment I saw the wheels were 3d printed i knew this was going to go bad, looks like the suspension arms were 3d printed as well. Cool concept... for cnc machined parts. 4 hub motors will see that thing blasting at ludicrous speeds. May want some belted tires as well. Did the manufacturer even test this thing? lol

[@ggycka_guy]

lol

[@Skwisgar2322]

To be fair, this thing looks to be designed for super smooth high speed tracks, a parking lot like that might as well be off-road as far as it is concerned.

[@isaack2274]

Just the fact that it has a wooden floor

[@legiony5209]

Apart from what people think 3d printed parts are actually really strong, you just need to learn to use the material correctly: I have 3d printed rims, but every wall is thick between 5mm and 10mm, same for the Shocks arms. It's really sad for this car to fail like this, it looks like the damages wee caused by real silly errors. I would have made all those blue parts out of molded nylon, the motors mounts almost two times thicker, the chassis thicker, the body mounted traditionally with clips, the motors controlled by a flight controller (like fpv drones) and the wheels belted. It looks like a really good prototype tough, it just need some minor but vitally important modifications 😂😢

[@FrankBullitt390]

They didnt even take into account tire growth at RPM which was why it kept failing, first time on the bench.

[@dspencer8827]

Motors having a fit😃😃👍

[@buddhahat]

Jesus it blew itself apart that was one of the shortest lived pieces of kit I've ever seen on your channel. Thanks for spending the $$$ so we didn't have to! Can't wait to see the rebuild with proper parts. It looked so stealth before it went tits up lol

[@jamesbond-pr5jl]

Soooooooooooo by the power of GOD eh? 😅

[@nabcdefghijklmn9853]

It initially looked amazing and a real game changer. My jaw dropped when I saw the in-belted tyres balloon and break the diffuser. The test run was so funny for all the wrong reasons, and this time not Kevins fault. Mammuth have suspended sales on their website and posted on Facebook to take responsibility for the horror show due to substandard wheels.

[@holmes1956O]

Good for them maybe have a look at the suspension components quality while they are at it

[@AirArtStudiosOfficial]

How could they not know though😂. It’s not like it was an extreme test😭😭

[@davelowets]

Those "factory modded" tires and wheels are an absolute joke. Edit: ...and get rid of the wood on the bottom, and replace it with a proper Carbon Fiber plate also... 😕

[@henria.277]

The entire car is 3d printed, this is shit quality and the reason it is so expensive.

[@endgovernmentextremism]

7:13 The camera panning to Kev, who throws is to Steve as he turns and walks away out of frame is perfect.

[@willowravencroft]

no drop test, no torture test, not sending it to to moon.. rc car still EXPLODES 😂 another quality content from Kev! 👏

[@GeorgiaLSCrew]

😂

[@mathiasvangils9589]

No staircase off doome 🙈

[@clarklouis5822]

Lol

[@zach.225]

I feel like with a bit more R&D the car can be insane. I see a lot of potential in this kind of car.

[@SkitzoFPV]

It looked like the rims were 3D printed and they just slung apart (which is what I predicted). I did see a ton of potential there though

[@tonyu2298]

You see a lot of potential, I see a lot of waisted money.

[@brandonr8269]

cool concept, drone motors as wheels but yeah...four hex screws to hold them on?? I knew instantly that they would fail catastrophically with any power to them. I'm not even an engineer and that was obvious.

[@neongaming6336]

pretty impressive build quality.

[@Friddle]

😂

[@jamiestevens9381]

This is why we need Talbot in the hobby! Lol I appreciate the stress testing!

[@kristopherguilbault5428]

Exactly! He's perfect to test and break! He's so well off that it doesn't matter a shit to him if he wastes $1500. Lmao

[@Hamzamakesfunvideos]

LOL

[@diemturner5755]

lol, "stress" testing. If you redefine stress testing to moving about for longer than 10 seconds...yeh.

[@bigmickrc8265]

Wasn't even tested, it destroyed itself 🤣

[@micahhittinger6083]

Good god! I love the concept of that car. A motor on each wheel, no diffs, no gears, no driveshafts. What crap manufacturing. It destroyed itself immediately. Either they had a major malfunction in the making of the parts or they’re idiots! How is something that piss poor made and then shipped to someone like Kevin? It’s not like he beat on it. Seriously. WTF!

[@ozzie7523]

Send it back to them with all the pieces it left behind😂

[@Lunarpollo5622]

LOOKS 100% SPEED 100% DURABILITY -5% SELF DESTRUCT CAPABILITY 100%

[@Mr._Magee]

The technology behind the car is brilliant and innovative. The wheels are far too brittle. Needs more testing and development. Hope it does well.

[@Mr._Magee]

@@Cloxxki I think the wheels were 3D printed by the looks of it, just not strong enough. I was really hoping to see this car absolutely fly. It's certainly got the power. When Kev pushed the throttle and turned the steering, it was catching the underbody. There are a few flaws that ironing out. Gutted it ended so early.

[@Giuliana-w1f]

3:34 the front right tire touches the plastic while steering It looks like no one even tested it

[@dirkmohrmann8960]

This is literally 4 drone motors and a re-programmed drone controller in an (apparently) poorly 3D printed chassis. I wouldn't call that overly innovative, and for the price it's an absolute joke, considering that they seemingly couldn't even be bothered to do literally any product testing.

[@superchargedadventures]

Brilliant Innovative and invented in 1898 by Ferdinand Porsche...

[@Giuliana-w1f]

@@dirkmohrmann8960 it doesn't look 3d printed, but it is poorly design (if you can call it that), the wheels can't hold the torque of the motors, and it doesn't have space for the wheels to deform or even steer (at 3:34 the front right tire stops wheen touches the plastic while steering)

[@DSPPC]

Well… you have to admit, the engineering got into this car has been exceptional. I like the ideas, and with all the electronics it is definitely a step forward. The choice of 3D printed wheel, and suspension parts is a bit… wrong imo, especially when using the wrong materials. That was probably the main issue here…

[@JohnBaxendale]

They can't have done any testing, he ran the throttle up on the bench and even without the body on, it self destructed 🤣

[@AdamHarte]

Seems like it should have just been a mod kit for an existing Arrma platform, rather than making a new platform out of 3D printed self destructing materials.

[@l4x3rj]

With the motors mounted to the wheel the force on the control arms will be huge. They will need to be way bigger and stiffer in addition to better material

[@dylannye155]

Lol you're probably right, tires shouldn't shatter like that for something that costs that much

[@TheDeeGeeNL]

Also the wheels are printed in such a way they're not balanced.

[@jessedemarcus5993]

That’s the best video you’ve had made so far

[@tman1132]

Got to be a record. Fastest time Kevin has broken an RC car.

[@tariqmeliani645]

Nah de car broke itself

[@luke7542]

Gotta be a record the most expensive maintenance rc car too!

[@ozzie7523]

Did they send you that thing free of charge as a youtube promotion? I hoped they liked their 'promotion video'😂😂😂

[@dspencer8827]

3 wheels on my wagon 😃👍

[@JkDSnake]

[@chaosrc13]

Out of all the crashes I’ve seen on your channel, that’s honestly the most entertaining one I’ve seen 😂😂😂

[@HobbyQueenRc]

That's insanely cool... shame it disintegrated like it did.. The shocks look like amazon specials?

[@anthonyrawsthorne656]

You'd be gutted if you'd spent $1500 on it, and it must be the first time we can ever say, you weren't being tough on it!! Love their blurb - zero axles - zero differentials - minimal maintenance 🤣🤣🤣

[@Gavs_rc_hobbies]

They forgot to add 'zero durability' 🤣🤣

[@GlenD1977]

Well they're not wrong, you wont be maintaining it as it'll live on the shelf........in bits lol

[@anthonyrawsthorne656]

@@Gavs_rc_hobbies And ,Zero Wheels! 🤦‍♂️🤣🤣

[@ManuelOrtizification]

zero wheels lol

[@diemturner5755]

Holy balls, am I glad I saw this. This MUST be the most fragile RC car I've ever witnessed. What is this thing made of, bubble gum and wet tissue? This certainly goes a long way in explaining why the manufacturer demo'd the car on an indoor basketball court. A perfectly smooth surface. I was considering picking up one of these...at a price point of $1500 without a transmitter I would have been absolutely livid. I wouldn't pay $500 for it now.

[@Psalm91ArmorUp]

I wouldn’t pay $1..

[@Lord_Pistachio_Nut]

I think bubblegum and wet tissue would have lasted longer actually! 🤣🤦‍♂️

[@mvbracing]

I remember a 1/10 offroad competition car called the predator, that thing was also made of glass like this car

[@tonyu2298]

Well said. What a a waist of money.

[@claycollins8973]

This is up there with the boat one in hilariousness 🤣

[@captaincouldverc]

1500$ for a wooden chassis? 30 seconds of run time before a catastrophe.... Thank you for testing the way you do. This just saved so many people, so much time and money. Certainly people would've scurried to this model had they not seen how fragile it is.

[@somerandom7215]

nah wooden skid plate, the chassis was carbon fibre

[@captaincouldverc]

@@somerandom7215 OK it's bellypan, still doesn't mean that's a proper excuse to MAKE A 1500$ RC WITH PLYWOOD! And trying to justify plywood on an rc car, is like trying to say the model A, is current high tech.

[@insiainutorrt259]

Its called a scam... Obvious one at that

[@muskokamike127]

Hint: learn a thing or two before making comments. Morgan still uses wood in their vehicles, same as Kenworth and Peterbilt.

[@captaincouldverc]

@@muskokamike127 INTERIOR DESIGN pieces in a mass production heavy haul VEHICLE vs high performance oriented TOY......... really? You certain you want to continue chatting rigs with a retired diesel mechanic as your defense?

[@METALfanUSMC]

Gotta love a "WHAT HAPPENED!?!" moment before it leaves the bench!

[@thatmanjuan645]

Awesome video..!😎😎

[@dangliebitz]

I saw this car a while back, thought it looked like it could be epic, but was wondering how the motors would stand up to kerb strikes, then the wheels exploded before it got near a kerb 😂

[@CalebBoender]

Curb*

[@dracolyth]

Dafuq is a kerb?

[@RCCaveStudios]

Curb ..

[@squits]

@@CalebBoender kerb /kəːb/ noun a stone edging to a pavement or raised path.

[@devilman1976]

Kerb is UK English, curb is American English so if you septics want to carry on correcting British people how to write the language do carry on but don't think you're always right. Take it easy guys!

[@chrisallison4175]

'Drive it till the wheels come off' - Didn't take very long.

[@rcocm]

One of my most fav episodes 😂 all the anticipation and excitement, but first the damage in the shop, then spontaneously exploding on location, then complete destruction with hilarious reactions 🤣 😆 pure gold. Could have been any car, it doesn't matter, just epic content 👌

[@jondilly1974]

It’s a great concept, but all the FDM printed parts scared me away for this exact reason.

[@darealkosmo]

people really need to invest into injection molding if they want to make products that last. This was tough to watch haha.

[@TheNamesArif]

it looks like it wants to fly too

[@ianphil397]

​@@darealkosmo You can do a post process on FDM parts where you pack them in salt and then re-melt them. They should reform into a solid part with a stronger crystaline structure. Still wont be as good as injection modling though.

[@FuoFire]

oh yeah and whoever sells you anything structural 3d printed in plastic know that but hey, shhhh

[@Pablo668]

The concept is fantastic, the design looks awesome, the execution...... Sorry to see that happen Kev. I actually think that when these things are ironed out they will be brilliant. Just needs some re-thinking. And it is so quiet!!! When you think about it tech-wise, it's a ground drone. Fun vid Kev!!

[@picklewiickle.1583]

Cant iron out anything printed its way to brittle

[@jamesnagle7894]

Clare laughing is the best!!!

[@CristiNeagu]

Him: Body is held on with magnets. Me: Oh boy... that's bound to end well...

[@CristiNeagu]

Update: and I was right. Whoever made that thing was very naive.

[@carbonworksau]

Looks like they've got quite some development to do! I think the weakest rc car is stronger than this, especially at the price of more than $1400. I had high hopes for it, it looks so sick. Hopefully they can solve the issues!

[@kasuraga]

I think a 140 dollar rc car could handle more abuse than this. Hell, if that $140 car his this thing, it would be fine but this expensive ass car would explode into a million pieces.

[@victorkrivor2174]

its designed for axial stress, not lateral, theres a reason its a top speed machine

[@kasuraga]

@@victorkrivor2174 that makes no sense at all. top speed cars still have to endure lateral stress since they'll never drive perfectly straight. the power alone is enough to snap components on this thing.

[@caspfornia]

Looks like it has a pulse still maybe you can revived it. 🤘🤪🍻🍻🍻🍻

[@jayhow997]

Not bad, traveled 12 meters before catastrophic failure, great value £100 a meter.

[@TheCameraManReviews]

That was one of the funniest things ever. Me and my son were crying. Excellent video!

[@stevenyates3196]

Wow glad that wasn't my money lol. Looked so smooth and quite. Well... until it self destructed.

[@rcalltypes8230]

I like the idea & it has potential. It’s made out of out very cheap 3D printed materials. Didn’t they test it, before sending it to Kevin 🤷🏼‍♂️

[@SteynvanLent]

To be honest, no amount of testing would make it Kevin proof ...

[@HAWK__VEERU]

Yaa

[@chriscarswell450]

Kevin IS the tester!!! 😆

[@RizwanGnag]

Good to see everyone laughing and having fun...Kevin you are such a gem! God Bless You!

[@SoberDaze1]

Ok...that's hilarious 🤣🤣🤣 I saw this video when it came out they're going back and watching you guys cracked up again makes me laugh out loud

[@volvo09]

I love rewatching this video, that car is such a mess 😂 and the laughter is too damn funny 🤣

[@truenopanda86]

Holy wow, this was absolutely crazy man! It couldn’t even handle itself!!

[@ramsandrzr3706]

Absolutely amazing that’s the latest technology. Four wheel brakes everything awesome about having the motors in the wheels

[@TheNeelonRokk]

Four wheel breaks (fixed it for you). 😁

[@mattgrieve774]

It looked insanely fast when it was moving! I think you got more smiles out of this in the 42 seconds it lasted than any of your other R/C's!

[@dodgywheelsandropeywiring5697]

Those motors look like large drone motors to me, can't imagine them being any good if dust gets in them... oh never mind it exploded. :-/

[@stellerate]

This car was definitely more of a collectors item than a car to actually be driven, I can't believe it just fell apart like that tho.

[@gesie0504]

Mammuth Tough Baby!

[@GlenD1977]

As soon as I saw all the load bearing parts and wheels were 3D printed I had a feeling this was just going to disintegrate, I wasn't wrong lol

[@dnafpv]

Right! As soon as he took the body off you noticed all the 3D printed parts. I was like damn no way those will hold up I must be wrong they only look printed then oops lol

[@MrGazhay]

I've been waiting for someone to do this with torque vectoring etc... I'm genuinely gutted!!

[@colinmetzger6755]

You really need a special made motor with a huge shaft, maybe 4mm steel if you want it to really be able to survive a beating. Also going to need to design the bell to protect the magnets in the motor better so that dust from the road doesn't just wreck them too. Could be very cool with proper design, but this clearly isn't it from a mechanical standpoint and we didn't really get to see if the SW was any good with how short lived it was.

[@tysemilicia3931]

@@colinmetzger6755 we would be able to see more tho if it wasn’t so bad mechanically

[@Lunarpollo5622]

5:57 I can't stop laughing How'd it just disintegrate randomly like that 😂😂😂😂😂 Self distruct

[@D3moknight]

This is probably the hardest your videos have made me laugh. I can't imagine they actually tested this car before they shipped them. First problem is a car that looks like it was designed to be a 100+ mph car has unbelted tires instead of belted or foamies. On top of that, the suspension parts look like they are made from saltine crackers. The power train looks serious though. How did they expect a paper mache suspension setup to hold down all that power?

[@MrGibbie2210]

3D printed parts on a monster like that had absolutely no chance of standing up to the torque that thing puts out…..

[@AtTonisGarage]

This is not an RC...this is a beast...looks like a concept car form GranTurismo...it's fantastic 👏👏...and then you see it running and you are like....what???????🤣🤣🤣🤣

[@lowridr2]

Think we can appreciate how tough some of these hobby grade rc really are

[@AB-80X]

Not sure that's the case. I own a few things that are crap to say the least, and they are still better than that heap.

[@smallscalemotoring]

One of the best Talbot videos in a while haha Sorry that this happened to you. I hope the manufacturer steps up to help you fix it. Keep up the great testing!

[@Jadinho_11]

Love sitting down at the end of the day sipping a coco and watching my favorite rc youtuber mess about this is why kev is the best person on KZbin

[@rcmakingtracks18]

Wow, that must be some sort of record. 1,500 rc car explodes in less than a minute. However I did laugh out loud. Nice one Kev. John

[@TheMdavis07]

I am absolutely speechless LOL. Kev you're an absolute legend please give this car another go it's got so much potential not going to lie right before the end of the video when all the other tires came off my stomach notted up. I was not expecting that. SMH🤣👈

[@HIGHFLYINGBUDDY]

I don't want you to change anything u do, this rc car might break the world record!!! But I had to skip through ur intro just to get to what I wanted to see carnage and/or success! lol keep up the great work!! Much love from USA Massachusetts!

[@warriordugan7236]

The Kiss brothers in Hungary have a lot of redevelopment to do as well as giving you a full refund. They should want the car back to evaluate what went wrong so they can use more reliable parts on their 3D printing machines. Thanks for the great video Kev. Pretty sure no one will be buying this failure of an R/C car until it's all sorted out.

[@boxxer-bu1bl]

OMG 🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯 you are the bestest

[@boxxer-bu1bl]

Yes

[@H3110NU]

The drivetrain, motor setup, and software looks great. Just think they need to work on durability “slightly”. Stronger wheels, stronger hubs, stronger diffuser (or more space for tire expansion) better mounting system for the body. Ok so basically I think it’s a great prototype to hang on the wall, but it’s not ready for the consumer yet.

[@ryanbenge7824]

I agree with this dude. Hopefully Kev didn't kill this cars image before it had a chance to sell and fix its problems

[@ianbudgetrc2574]

The first thing to do for them is to make the tyres belted

[@jarfur559]

I agree, if the motor is in the wheels, they need to be strong to take the added weight and torque

[@Adam-vi1ep]

Problem is it's only made for the basketball court 😂

[@dspencer8827]

Very cool car though

[@bobpattenden]

Shocked to see wood being used, surely there is a better material for this purpose. No way 3D printed parts will take that sort of stress, body held on with magnets, at 100mph? Fantastic concept but looks like it was built in a shed. Cracking vid Kev.

[@GizmodoMN]

Wood is cheap and easy to work with. Many people use wood for splitters and air dams on real cars in SCCA and NASA.

[@muskokamike127]

@@Cloxxki Peterbilt and kenworth use it for the floors in their trucks and Morgan uses it for the frame of their vehicles. It is only people who wish to demonstrate their ignorance make comments like "shocked to see wood"......

[@D3moknight]

The wood was the only thing that didn't fly apart on this thing.

[@gt-r9035]

Don't blame wood. It's a cool Material for construction. & btw it wasn't the wood failing.

[@ferv888]

Of course people are shocked to see wood on this car, if you pay 1,5 k for a car and they use all cheap and shitty materials like wood.... Im not saying wood is bad but if it is such a thin wooden plate, it's worth nothing and has no strength... Thick wood can be strong, yall make shitty comparisons with your NASA and shit... Stfu, all of you

[@skree_fpv436]

I recognize those start up tones. Those are BLHeli escs. Those motors look like GARTT ML5010s which are a really cheap brand of drone motors. You'd think for the price of this thing they'd use a good brand like T-Motor or Brotherhobby.

[@MegaSockenschuss]

Or molded plastic parts, or maybe CNC machined, but not this weak 3d printed stuff...

[@anden2462]

Guys the monster truck is almost ready still

[@StevenKeel]

Thank you Kev, for testing the quality of this car. I definitely won't be throwing my money away on one.

[@mjrcrawler]

Looked incredible but definitely was a let down hopefully when it’s fixed it will run as good as it looks Entertaining as always though my friend!!! 😂

[@W1ll1sZhang]

This is so ridiculously funny

[@ghostinng274]

$1600 for a car that tears itself apart. Huh.

[@theblue_hatter4829]

Great video I really hope to see more cars like this they go insane speeds I think if you put a direct drive on the 200+ mph rc car so it won’t be geared down at all because 1000 kv motors in that it’s gonna rip (you would need insane space to run it and great tires)

[@davidmckenzie4092]

That was the funniest thing I've seen all week, thank you so much No. 4/25, good luck getting parts for that thing. It looks amazing though, great concept

[@kamil4151]

Lol I've literally implemented the same idea with some drone motors I had around and some 3D printing. I expected it to be super fast, but in the end, it was super hard to control ( I guess due to extra mass and inertia in the wheels ) and I crashed and burned it on the first test run. I still plan to return to it and try again, maybe I get some inspiration from these guys.

[@ChrisBLong]

This has always been the problem with hub motors, in full-size applications as well. Far too much unspring mass.

[@FarmerFpv]

@@ChrisBLong, They have a gyroscopic effect. Unsprung mass is not an issue when you have it dampened for its weight. Unsprung mass is always brought up in the full-size car world and is always a myth that has no effect on the vehicles. Besides, the parts were 90% 3D printed. if it were injected molded or machined parts it would have not had these issues. The company is a POS.

[@FuoFire]

get the inspiration from other guys or keep it up with your idea, as you have seen in this video theres nothing to learn from and its sad

[@nickvledder]

Check out "e laermans" efforts on KZbin... Very, very effective with hubmotors on a car and a reverse-trike.

[@gazza1059]

I'm guessing as soon as you come off the power the motors use magnetic field for braking to. Perhaps adding power then reducing power is asking too much of the 3d printed mounts and the fast slowing/braking action caused the failures. You'd think they would test it before sending it to you lol. Great video, haven't laughed like that in a while.

[@jamesklingensmith2711]

I would love to see you upgrade the losi dbxl to the max!

[@8bitStevo]

Seems to me like the motors should be inboard to reduce unsprung weight and also fixed firmly to the chassis so they don’t twitch and torque the suspension. The main failings are the wheels though which should have been easily avoided, shame as it looked like it was going to rip

[@RobertNES816]

It's like they designed the car and never actually tested it.

[@nadiaelderbas8515]

The main problem is the clearances between the chassis and the ground and between the wheels and the body.

[@Tzuau78]

I liked the look of this, reminded me of the esc and motors from my old racing quads. Conceptually awesome (could potentially use gyro and motor speed for traction control and torque vectoring). In practice… it’s a ways off yet 😅

[@jjsgaming7324]

That's absolutely hysterical I have never seen a remote control car fall apart that easily

[@paulessdot2]

Did that company search high and low to find the most brittle plastic to make an RC car from?

[@JamesSmith-ds5og]

I want to see this car done properly. It looked like it had so much potential

[@TheArfdog]

The postmortem twitching at 7:40 just sent me over the edge. I’ve never laughed so hard at an RC video. So embarrassing its pissing hilarious and Claire laugh makes the video lmfao. “A bit there … and a bit there” lol!!!

[@jake4194]

Wow, I wonder what the company that makes this car is going to say when they see this! 🤣

[@ferv888]

They will feel embarrassed about how trash theyr car is

[@Daan_015]

emotional damage

[@coqfier]

the strongest car i have ever seen 🤣

[@ethancowan2441]

At 7:08, I laughed so hard Kev!!! I was CRYING!

[@D.C.Johnson]

Kev, I predict this will be one of your most watched videos ever. I've never seen anything quite like this. Sad and hilarious. Womp, womp. But you got this! Note what went wrong, get it fixed and let's see what this thing can do! You rock Peace

[@scottsrcshop]

Was actually hoping to see this thing rip not r.I.p. I’m blaming the RX he loves to use 😝

[@AlvaFPV]

That company really had some balls to send you a car that’s damn near totally 3-D printed. What the hell did they think was gonna happen and they knew you was gonna make a video. The design, if made from quality parts looks awesome though.

[@AlvaFPV]

@@Cloxxki thats nuts

[@variator7466]

I like the concept but maybe 3D-printing parts wasn't the brightest idea :)

[@jehutyprime]

Stemp “It’s made out of that stuff - what do you call it?…” Steve “Cheese.” 🤣🤣🤣

[@justinm3641]

I was expecting this car to be insane not with just awsome looks but speed!! 😅 I was so shocked to see how easily it is for it to brake, great idea but who ever made this car needs to redesign how the car works!

[@chadpennington4594]

That is a book holder, nothing more🤣

[@mattyf1492]

Hmmm, seems like this company is trying all sorts of bizarre ideas, but never seeing things through! Disappointing for sure. Breaks literally out of the box lol this is why you don't build stuff solely on a computer program, real world testing will always show the faults! Thanks Kevin for the amazing video! Always a pleasure watching this channel!!

[@eriknyman3984]

They totally went though the R&D cycle.......and forgot the D.

[@ClaytonHunt]

LOL, that's the best! I built a 3D printed RC car with my son, the 3D material just isn't up to the forces involved. Ours exploded in like 3 seconds too, lol!