4 Upgrades for the SCX6 THAT YOU NEED!

[@greenwithnb]

Really happy with my Steady Foams. Thanks for suggesting them.

[@scalebuildersguild]

Glad you like them!

[@eriku7205]

It’s been about 3 years I’ve watched you and I finally get your jokes .. it’s all the lil details I appreciate thanks for the hard work

[@scalebuildersguild]

Thanks for watching and sorry for my bad "dad jokes"!

[@FokDR1]

I've had mine for 2 months now and loving it. Upgraded the servo to a Powerhobby 1513MG (same specs as a Reefs 2000, but $200 less), Aluminium front shock mounts to get rid of the upper panhard mount flex, DIY metal bracket to get rid of the the lower panhard mount flex, Injora aluminium wheels, Flysky GT5 TX + RX, Lights on/off from TX. The upgraded power and rigidity of the steering caused the RX/ESC tray to break at the front left mounting point, which is a weak point, so I replaced that with the Vitavon tray. I reprogrammed the ESC more to my liking. I have an Injora aluminium front bumper mount sitting here waiting to be fitted - the reason for that is that it includes a servo mount for the stock steering servo - I will covert the stock servo to a winch, power it with a hobbywing 1060, and mount it behind the bumper. I also plan to change the pinion to 1 tooth smaller, as I don't need the current top speed in 2nd gear, so lower gearing would be more useful for how I use the car. I'm using Gens Ace 3s 8000mAh batteries and getting great run times out of them. I find the BEC in the ESC to be fine, as I'm direct powering the steering servo. I'm still using the stock foams, but will replace them with the new Proline Dual Stage as soon as they release them. Yeah, I've spent a bit on upgrades, I can't help myself, but I'm loving this truck. Cheers from NZ ... eh!

[@scalebuildersguild]

Sounds like a great set up! Cheers mate! 👍

[@Truth_Spoken]

Steady Foams made a huge improvement in my truck. I also have a Reef's Beast 2000 steering servo and the Bowhouse RC slipper pads. All are solid recommendations.

[@WoodsUnknown]

I love my scx6, the only thing ive done is tighten the slipper clutch as it was loose out of the box and i taped the vent holes to prevent water from coming in and now i am super happy, what an amazing truck.

[@scalebuildersguild]

Glad you like it!

[@michaelhoyle3266]

I have a SCX6 on order, supposed to be here Friday. Can't wait!

[@scalebuildersguild]

Have fun!

[@herozero1287]

Love my SCX6, I've done a few upgrades so far, custom rock sliders, fender deletes, Powerhobby servo, Injora wheels, and other small things like rock lights and vinyl decals. Hopefully someday they'll make some Patagonia tires for the 6. It's truly an impressive machine!

[@scalebuildersguild]

Cool! I hope you're having fun with it!

[@stabbyjosh7931]

It enbiggens the heart of all men!

[@chilinonadrtroad2737]

Glad you showed this with the slipper pads I thought it was the motor surging the way it sounded but the slipper makes way more sense I'll be getting those on the double

[@scalebuildersguild]

Thanks for watching!

[@andrewrichey7374]

I finally got to see one in person, wow is it huge, nine of us went trailing the other day and I was amazed of the performance of it. It went over stuff I didn’t think would make it but went over stuff like nothing. Appreciate as always you sharing

[@scalebuildersguild]

Thanks for watching!

[@laserbeam1620]

Great video. I love my SCX6! I use a NSDRC RS2500 and it's so strong. Next is definitely foams!

[@Socalnik66]

Been running the Hirax tires and the beast 1000 for awhile now and love it. Drilled out the stock servo arm and made it work withe servo. Added the Vitavon steel driveshafts, shift servo mount and shock towers. The only disappointment is the stock body. Was driving it on some short cut grass, rolled it slowly once completely over back on to its wheels, and punch a side mirror into the body and cracked the other side where the mirror mounts. Now running with no mirrors, Shoe Goo, drywall mesh, and thin tire wire to patch the holes. with your recommendations. going to pick up the slipper pads and the wheel faces. I love you channel and your cinematography is always impressive. Thank you for all your hard work.

[@scalebuildersguild]

Thanks for watching! It feels like a long time since we've seen grass here in Canada 😂

[@SteadySpin]

Really solid review on upgrades. Looking forward to more on this rig!!!! Cheers 🍻

[@scalebuildersguild]

More to come! Thanks for sharing your foams with me! Can't wait to test them properly!

[@kyleroberts5061]

Removed all the sap from the axles and transmission and put marine grease. Made my own two stage foams from Crawler Innovations with tools I designed on Fusion360. I opted to do the slipper delete from vivaton. Just dropped in the Reefs2000 and can’t wait to hit the trails. The Hyrax will be in the future I’m sure your rig is looking great Matt!

[@scalebuildersguild]

Right on! Thanks for the info and thanks for watching!

[@NaturallyRC]

4:27 Why wait? We were lucky to have an SCX6 join us in the Ravines recently and (bone stock) the thing was an absolute beast -- deep snow, hardpack, glare ice, ice-cold creek rapids -- no problem. Almost made me want one. Maybe the slider kit. 😁

[@RcNickster709]

Agreed!! 😁😉

[@bucksrcworld8119]

awesome upgrades, def need to do the carbon fiber slipper pads, have only shimmed the diffs on mine so far..

[@KeepinitRealGarage]

Got one about two weeks ago. Loving it so far. Still tons of snow on the ground so all my trails are covered and haven't really got it out much yet. Thanks for the info on the slipper pads, haven't ran Into any problems with mine yet at all

[@silverbullet126]

My SCX6 is sort of upgrade crazy town. Newest on the way is the 3BrothersRC Black Jacket 6S motor, going to use a MMX8s to run it.

[@Antony_Fallen_Customs]

Great video. Ill getting the upgrades for mine. I found that the front panhard mount flexes a heap when there is load on the steering. I've ordered an aluminium upgrade for mine. I painted the roof on my yesterday 🤣

[@trashbag8124]

They need to make the Hyrax in a 1:1 size, that’d be amazing.

[@Truth_Spoken]

Oh god no.

[@trashbag8124]

Why? They do amazing?

[@scalebuildersguild]

I'm not sure that would scale up the way you think it would. Thanks for watching!

[@chevyon37s]

For me I found the hyrax tires are overrated, anything JConcepts green is better and I like my proline KM3’s better than the hyraxs.

[@anibalbabilonia1867]

Man I was impressed by the size of that rig at the hobby shop! Pictures don’t do justice! It is a great looking rig, but when I saw the price! Yikes 😳 I couldn’t afford it! But it is definitely beautiful! Nice upgrades there though!👌😎👍

[@capt.andrewcederholm1898]

I recently added a few great parts from treal, front axel, servo mount, front and rear braces, and center brace, and most important servo towers front and rear! All parts are gunmetal! They have so far worked flawless still using factory servo. You are very correct that the factory servo is lacking but my budget is blown for a while treal products are in my opinion the same caliber as Vitavon! Choose not to do the rear yet cost is the only reason. Love the channel next is modifying my used new to me MC8 by cross

[@scalebuildersguild]

Good luck with the MC8 upgrades!

[@Tight_Lines_Uce]

Awesome content. Thank You for sharing your thoughts and time. Definitely will have to upgrade my servo. It just went out yesterday. Going to my LHS to pick the Beast 1000 today. 👍🏼👍🏼👍🏼👍🏼

[@scalebuildersguild]

Glad it was helpful! Thanks for watching and have fun with the Beast!

[@darkcrawleruk]

Have a look at the Treal Upgrades for the SCX6. Plenty of bracing and also some wheels.

[@scalebuildersguild]

Thanks, I'm not keen on swapping axle housings, the plastic at this size makes a big difference over an obstacle due to the weight. I will see what else they have though!

[@darkcrawleruk]

@@scalebuildersguild they have a few bits other then axle housing. Friend of mine is the UK importer for Treal and his SCX6 so far is over £2500 lol.

[@RC-ScalerandBuilder]

Foams are definitely on my list of things to change. I’m still running the stock servo, just powering it with a castle BEC, that has helped it a lot, I also beefed up the panhard mounts on the chassis and axle with DIY mods. I’ve also bound it to my DX5 rugged and like the ability to change esc settings on my radio.

[@scalebuildersguild]

Sounds great! Sounds like a good setup! Thanks for watching!

[@RC-ScalerandBuilder]

@@scalebuildersguild thank you for making great content. You’ve given me plenty of inspiration and knowledge to tackle things I wouldn’t have considered doing before.

[@TheWright1]

I have one but still haven’t done any upgrades yet. I definitely want the slipper Pads and Hyrax tires. Not sure on the foam or none foam insert. I’m thinking 3brothers RC anti foams.

[@V8chump]

Man I wish 1.9 hyrax looked like that! Those side lugs look awesome, they probably help performance too

[@jerryvolpini7987]

Some wise choices there Matt 👍 I would like to see how no foams perform in this application?

[@Rokstardad82]

My first scx6 upgrade would be to get an scx6 lol. Great video as always 👍

[@scalebuildersguild]

Thanks 👍

[@silentjde]

I got to drive one over the weekend and it is definitely different, it was like driving a power wheels, lol

[@scalecrawlnl]

Good fun lunchtime, rc upgrade video with SBG! The truck fills up the frame rather nicely. No need for the truck at the mo, nevertheless, exciting they actually made it👍

[@scalebuildersguild]

Thanks for watching! I hope you enjoyed your lunch!

[@NordicRC]

Top dollar presentation

[@scalebuildersguild]

Glad you think so!

[@felipealvarezjuarez322]

Saludos amigo muy buen video un gran trabajo con el axial! Una pregunta las aletas delanteras donde las conseguiste? T agradecería respuesta saludos maquina!

[@toksta79]

Some of the scale and trail groups and events I attend don't allow the SCX6 so I decided not to get one. Definitely looks cool though.

[@JunkfoodZombieGuns]

Start your own group. Don't let them hold you back!

[@RCtime]

Wow all of these things are so huge 😎😀

[@thejeepinrealtor5742]

The track bar / panhard needs better mount support. Aftermarket aluminum front shock towers make a big difference stiffening the frame side panhard mount. That, servo, and the anti foams are what I have done so far. I’m about to be putting one of the 8s black jackets by 3BrothersRC in though 😬 Ordering my mamba monster x tonight!

[@walterbryan1798]

Really cool!

[@scottdaubenspeck2291]

Sweet video. I've done vitavon axles with portals, driveshafts, rx/esc tray, motor mount, aluminum beadlock wheels, & shock mounts. 3brc antifoams & the new black jacket 860kv 8s motor, castle mamba monster x 8s esc, agfrc 100kg 3-4s direct power steering servo & reefs 400sc v2 shift servo. Keeping stock tires for now & do plan to test out the steady foams as well. My rig weighs 33lbs without batteries.

[@SteadySpin]

You got all the upgrades

[@RcNickster709]

Well I tell Ya I am loving mine just fine AS IS. for now. I have added a little color here and there I have ordered a larger Bec and some shims for the Front and rear diffs. I like the tires on this thing, but you're right. They ARE stock, so replacing them is inevitable. But work well for now. ;) Also I am really noticing the Pan hard Bar/steering plastic mount flex, everyone talks about. for me? That will be my next project. All great points Matt and thanks for sharing

[@scalebuildersguild]

Thanks for watching!

[@sjelen]

So, finally got one of these bad boys and it kinda killed the tenth scale for me. This is so much more fun to drive in slow speeds and just watching the heavy turk going from side to side. Really hoping this scale would take off and we could have good safaris with it like we did today with around 50-60 drivers with our tenth scale.

[@integrityrc7356]

Lots of help thanks. What is your thoughts on 4way steering

[@scalebuildersguild]

It's fun depending on the circumstance. I don't see much need for it on a trail/scale truck. Rock crawler? Give it a go!

[@CoachD386]

Nice upgrades 💪🏾💯

[@scalebuildersguild]

Thanks 💯

[@johngookinsable]

Daddy always said there were two kinds. Big ole good ones and good ole big ones!

[@boiledtea479]

Do a scx6 budget build off.

[@tomlucasrccrawlers9108]

Why not the 3Brothers RC 3D printed Anti-Foams? Not going to spend $400 on a servo....they bumped their head at that price. Way better option...why not a $225 Spektrum S9120BL 1/5 Servo? It makes 1454oz of torque at 8.4. And it's still fast.

[@scalebuildersguild]

Funny you mention that servo. That's what I just replaced, and it's night and day. That servo has some torque, yes, but it's very loud, and very slow. I couldn't drive with it.

[@rolexr]

Has anyone tried out if the front bumper of the HONCHO fits the WRANGLER? Maybe with some minor mods....

[@scalebuildersguild]

Haven't tried it, give it a go!

[@rolexr]

@@scalebuildersguild …o.k.…I did it today and man…it fits like a glove without any modification 🤩❣️❣️❣️ kzbin.info/www/bejne/m4LbmppvibWFjqs

[@andrewdecavia7553]

Any upgrades yet for the ring gear? Heard if you shim it, it has a better chance of lasting. Between the cars price, that reef’s servo price and some people saying you need to run those viviton (or whatever the name is) axles to correct the issue. We passed on buying one when we had the chance but I know my daughter would love it if we got one.

[@scalebuildersguild]

Haven't had an issue with the ring gear yet, and at this weight I think plastic axles are better. Thanks for watching!

[@seanhanley947]

"A noble spirit imbiggins the smallest man"

[@brandonhall5494]

bring back the scx6 for some axle upgrades and custom body paint

[@BlindGuyRc]

Yeah know. When this came out I was all. Meh, I don't need one. Over time....... ....... Well I need one. I need a pheonix first. But I do want a scx6. I also need to get more space haha. Great video. Love the upgrade tip videos. The Jeep looks bad ass.

[@scalebuildersguild]

Thanks for watching!

[@trashbag8124]

I’m looking to get into scale with a kit, what should I go with? SCX10 III Jeep JLU Wrangler with Portals 4WD Kit, SSD Trail King, Traxxas TRX-4 Sport, or the Element Enduro Kit? I’m open to other options as well! I want something that crawls amazing, can bash a little on the trails, and looks sick and is durable.

[@scalebuildersguild]

I would agree with Grant Kennedy. The TRX-4 is always a good option. Good luck with your purchase and welcome to the hobby!

[@SwampersRC]

We all like bigun's!

[@scubachrigi]

Thanks a Lot. I was thinking the same after i ready the Specs...sorry to bother you. I install a seperat bec to the steering Servo from Castle cc bec i think... And add a 80kg Servo at the same time. Should i use a seperat Akku for that to have more runtime on the Car or is that Not nessesary?

[@scalebuildersguild]

A BEC handles the servo, it won’t effect battery life.

[@RCinOC]

Can i put the reefs servo in and program my esc to 7.4 without damaging the stock shift servo and lights. I have the honcho. Thanks…

[@scalebuildersguild]

The stock shift servo will not like it. Stick with 6V, or run a BEC.

[@cosmaninashiva6115]

Sind die Proline Reifen nun im Grip so viel besser? und was spricht gegen ein China Servo? SPG 3870HV oder SPT 70 , einmal 46kg oder auch 70kg.

[@hemistormrc]

The only thing that could make Hyraxes better is a full scale company making 1:1’s!

[@scalebuildersguild]

Could you imagine?! That would be crazy. Just so crazy it might work.

[@Brake0722]

is there any difference from the honcho to the jeep, in terms of chassis upgrades.. or are they both the same?? i did notice the honcho has different tires than the Jeep. but other than that not sure what else

[@TheZX11]

Same chassis. The upgrade, maybe, is the flip up body versus the four clips on the Jeep.

[@bentraw2632]

I'm begging u to make a video with this 1/6 Super Baja Rey and the scx6 jeep JLU! Please, I really want to see them together. They say they're the same scale, but I want to see if they look appropriate together. Please do it!

[@joshuaminton4359]

What front fender flares are you running?

[@scalebuildersguild]

Knight Customs.

[@scubachrigi]

Can you tell me If there is an issue If i lift the BEC to 7.2V? Are to Stock servos Made for IT? Specilly the Gear Servo? And what about the LEDs? I got a honcho.... Thanks for your anwser 🎉

[@scalebuildersguild]

I’d say the gear shifting servo won’t hold 7 volts. You’d need to upgrade that for sure.

[@andrewsouthern3517]

I want an scx6 at some point

[@Bikes_N_Adventure]

Any thoughts on the harmful carbon dust that those slippers will create? Carbon dust is a massive lung hazard, of course you'll only be exposed to it when it's time to replace the clutch.

[@scalebuildersguild]

There's little chance of the carbon pads actually creating any dust and there's no abrasion. That's not something I would worry about at all. Thanks for watching!

[@Rangeman001]

Can we instal diff locks on this?

[@scalebuildersguild]

The SCX6 diffs are already locked. Thanks for watching!

[@thesaint3389]

Is there an adapter so I can run the scx6 wheels on a 1/10?

[@scalebuildersguild]

I think a 17mm to 12mm hex adapter should work, but double check the manual for sizing first.

[@tbonnnzsmith7935]

the carbin pads were do u get

[@scalebuildersguild]

The link is in the video description! Thanks for watching!

[@forrestcrabbe]

🤘woooooooooooooo🤘🍻🤘

[@vbspeed7571]

Hi from V&b Speed just dropped some rc drags✌👍#2022Drags....grate jeep

[@wiccanfpv]

i just cant get into the bigger stuff, bigger it is seem to use it less.

[@scalebuildersguild]

Fair enough! Thanks for watching!

[@wiccanfpv]

@@scalebuildersguild i dont fault you i no you get alot free so thats awsome, i just feel most of the hobbie realizes when size goes up cost goes up. The steering is still really weak after your mods as seen in 10th scale the front swaybar mount being plastic wont cut it, imagine what that metal part will cost in that size.But i love watching yours lol

[@taaraadv9144]

Obviously by the comments the Anti-foams by 3brothersrc is the upgrade of choice. But nothing wrong with promoting start up companies.

[@scalebuildersguild]

There's nothing wrong with anti-foams either, but I'm still not convinced they're any better than a foam. I get the waterproof part, that's good, but until I can do a proper side-by-side comparison, I'm not willing to comment.

[@taaraadv9144]

@@scalebuildersguild I have them on my trucks they are superb on sidehills, and it seems like everyone is running them. So they can't be worse. ha, ha. Fair enough though, would like to see what you think.

[@oldironsfury]

I (need) oxygen to stay alive . I will have to tell my wife I need a SCX6 ! 😉🤷🏻‍♂️😂

[@scalebuildersguild]

I like that you have a healthy fear of your wife like I do! 😂

[@searbhreathach9762]

Maybe the foam was meant for a smaller scale? That's probably it.

[@scalebuildersguild]

Possibly, thanks for watching!

[@searbhreathach9762]

@@scalebuildersguild Yeah man for sure. It aslo might be sold that way for people to enjoy light trailing. I find for my scx10 I like trailing instead of rock climbing

[@crawlerhelge]

1/6 hilux body 🤔🤔🤔? Hmm maby yes

[@wesmadebuilds681]

I wander what Mr Whipple would think of you squeezing those foams. Let’s see who is old enough to get this reference.

[@scalebuildersguild]

Please don't squeeze the Charmin!

[@DEENRC]

Love the scx6 recently made a trailer for mine..short video on my channel of it..I think you should make a trailer for yours. you would do a much better job than me..love watching your videos..You inspire me..👍

[@scalebuildersguild]

I'm glad I inspire you! Thanks for watching!

[@FerociousSniper]

That's what she said. XD

[@EtherealProject3D]

This truck needs portal axels.

[@scalebuildersguild]

What makes you say that?

[@EtherealProject3D]

@@scalebuildersguild I think it would give it a more bad ass look. I know on a truck this big portals are not exactly nesassary but it would look awesome

[@rueagonvyceratops2879]

No i don`t have a scx6 . i want one , but i can not afford the price for one , since my rc budget sets at 500 dollars for anything new or large scale .

[@scalebuildersguild]

Fair enough. Thanks for watching!

[@jacobsimpson347]

Check out my moa fcx24 build!!! Let me know what you think

[@charliebrown238]

Swee Jesus! $389! For a servo! You guys have WAY to much money! HaHa! You lucky buggers!

[@chippytits3803]

Better get used to it everything is going up in price

[@itzjoeylo4501]

That servo is $380 USD wtf

[@fredstah714]

I’d buy it if they warranty it for 5 years for that price.

[@itzjoeylo4501]

@@fredstah714 and I can buy eight $50 servos for the same cost as One…

[@brokennib1]

Wow, ok. You forgot to mention that these little upgrades only cost 700+ bucks retail!! And not one MENTION of a BEC, which this truck desperately needs. (20-50 bucks) There are MUCH cheaper alternatives out there, but I guess that doesn't reflect your best interest, I assume.

[@scalebuildersguild]

Keep in mind, the truck itself is already an eye-watering $1000US, so naturally, upgrades are going to be more expensive due to the size, and performance required. I didn't mention a BEC, because I haven't actually run into that problem. List some of your favorite cheap upgrades here! Thanks for watching, and your comments!

[@brokennib1]

@@scalebuildersguildSorry, I'm really not hating on you, I know this thing is expensive because I own one. (btw, it's 1200 us, not 1k, big difference) same servo off of Amazon, 300 bucks , as opposed to 500 for the reefs. Also, there are simple mods to stiffen up the steering, very low-buck. Some guys can afford an additional 3 grand to put in these guys, I cant. These trucks are awesome, but it is a bit more expensive than 10th scale

[@scalebuildersguild]

@@brokennib1 I always appreciate the feedback, and yes, I should have added a "+" after my $1000 statement. The Reefs servo I have is $389 on Amain.

[@brokennib1]

@@scalebuildersguild ooo cool! they were 500 when the truck came out, so that's very cool. I got an ARGFC servo for 289. It's a bit of a sticker shock when you first start shopping around. I just want this truck to stick around for awhile, not get priced it self out of the market. It's just an awesome scale and platform!

[@brokennib1]

OOPPPSY! You have the Reefs 1000, I was thinking of the Reefs 2000 ! My bad! OOOPSI-DooDLE!

[@RyanRKJ]

Hyrax? Eww. I liked seeing the KM3s better.

[@scalebuildersguild]

Everyone's got an opinion!