4 Variations of CARPRO IronX!? ◢◤ Sky's The Limit Car Care

[@gorillanismo]

Would Iron X Snow Soap would be effective enough if used straight directly on the clay towel as lubricant/iron remover?

[@SkyCarCare]

Yes it would but it would be too slippery and too hard to wipe off. Better options imo.

[@diegor.1497]

Which are the better options?

[@curia8487]

can you use product after expiration date is due?

[@SkyCarCare]

Yes, with IronX you can use it past he expiry for some time.

[@victoryensured7137]

Great vid, I didn't know there is an LS version.. Also I have a question, recently I bought Carpro's Polyshave clay towel and i wonder is it safe to periodically use it on a coated car? Will it marr the coating wich will then loose or diminish it's hydrophobic properties? Also can I use it in conjunction with IronX or better yet Ironx paste (wich I have in my arsenal already) without destroying the clay towel? Thank you for your time to introduce me to Carpro lineup! Keep it up!!

[@SkyCarCare]

Great question! No, you should not use clay or polyshave on a coated car or it will mess up the hydrophobics in most cases. Yes, you can use in conjunction with IX paste but we have found its better to just use a clay lube.

[@victoryensured7137]

@@SkyCarCare Thank you guys for your great work and fast replies here, thanks to ppl like you there is less confusion in our overthinking minds :) Cheers SkyCarCare your doing Gods work! :)

[@SkyCarCare]

@@victoryensured7137 Awwww you are so kind! Thank you!! Have a great week! -Corey

[@rover1374]

Thanks for the video. Rather than follow up with a mitt after rinsing I usually do a quick snow foam and rinse thoroughly. This seems to be sufficient for me 🤷🏻‍♂️

[@SkyCarCare]

Thanks for the feedback and tip Rover!

[@zachwen]

Any reason why nobody talks about IronX Snow foam? I haven't used it but it seems a like a really awesome product i feel like it saves time and can be used for lubrication for the clay bar at the same time. But i don't really see many people talking about it. Everyone just says IronX spray is best option, any reason? Is the snow foam just not as strong or ?

[@TnTriton225]

Do you use a different mitt for each product? Or just rinse it out and use next product?

[@SkyCarCare]

This video is to discuss each of the IronX products but you only need one of the ironx products on a given vehicle. Having said that, you can use the same mitt with each of them, should you use one or the other.

[@TnTriton225]

@@SkyCarCare I was referring to moving to another step. Like reset or Lyft, then maybe hydrofoam.

[@SkyCarCare]

@@TnTriton225 Ahhh it crossed my mind that is what you were saying! :). Yes, it is ok to use the same mitt - no problem.

[@jayzhang14]

HI how long can this ironx last once opened? I am thinking to get the gallon one

[@SkyCarCare]

3~5 years depending on storage. I would use within 3 years to be safe

[@jayzhang14]

@@SkyCarCare yea I think so, thanks man

[@Cloudy5.0]

Do y'all have a three piece kit like in the video, with all the matching vinyl stickers, gamma seals, and buckets?

[@SkyCarCare]

We do not, we do have these two items though that have some kit discount pricing built in. Just search - "Bucket with Gamma & Grit Guards & Premium Vinyl Bucket Decal 3pc. We would throw the stickers in with the buckets however the buckets are such a low margin item due to the importing and shipping costs, these type of stickers are such high cost to us, that we have not offered that to date.

[@flowinthrou]

I used Iron X LS on paint, I sprayed more than this demo, then I rinsed but it produced foam and I had a hard time rinsing it off. Is it a cleaner too or it is the way it is?

[@SkyCarCare]

It sounds like you used the wrong trigger. Was the trigger you used white? If so, thats probably the CARPRO Foaming trigger that you used which creates a foaming affect of the product sprayed through it. If IronX dries on the surface before you rise it off then just go over it with a wash mitt or sponge lightly while rinsing. I do that as a habit anyway.

[@flowinthrou]

@@SkyCarCare I think I used the chemicals spray, but it did not come out foamy. It came out like expected, sprayed liquid. I waited 2 minutes, I don't leave it long because I always have trouble with drying stuff, it's summer now. Then I rinsed. But now I saw the video, I'll do it like you here with the mitt

[@Romans_Toupee]

Please do a video comparing Hydro2Foam vs Hydro2. Id love to see what the main differences are, great video once again btw.

[@SkyCarCare]

it just so happens we did shoot one of these! I believe it is in editing.

[@SkyCarCare]

Let us know if this suits you. kzbin.info/www/bejne/m5qVhoVjrqd4hrc

[@bluegrasskid4835]

On some of the detailing forums, I read of posters prepping a car for polishing/coating, applying Iron X to a section and then claying that section using the Iron X as the lubricant. They then move on to polishing from that point. Do you recommend claying with Iron X as the lubricant? I would not have guessed a product designed for Iron decon would have the lubrication ability to act as clay lube.

[@SkyCarCare]

Well, it will work for sure... If looking to save time then it can save time as well. For me it would add time since I like to clean off really well after my Iron X step. Alternately, during my clay step I coal off with MF towels section by section without washing. If you are polishing in a later step then there is not really a downside to IX with regards to it being a lubricant except it will expose you to the chemicals of Iron X for a lot longer.... Personally I prefer separate steps. If you do use IX as clay lubricant then definitely wear gloves.

[@bluegrasskid4835]

@@SkyCarCare I think I agree with you. I will wash the vehicle with reset to remove the Iron X and use clay lube or possible the wash itself as lubrication.

[@RDowson]

Snow Soap in an IK Foamer 1:5 makes a great wheel cleaner.

[@SkyCarCare]

Thanks for the tip Robert!

[@Augusta7]

How often should I use IronX on personal car? Particularly on the wheels. Like how many times a year or something like that. Thanks

[@SkyCarCare]

Great question! That depends on the miles your putting on it... If it is garaged and weekend driven then no need more than 1-2x per year at most. If it is a daily driver with 200 miles a week then you could do it every few months and on the wheels even more often depending on how well you keep them clean and protected.

[@Augusta7]

@@SkyCarCare thank you!

[@rappapadim3352]

Hey, is it possible to dilute with demineralised water 1/1? Or will decrease the properties of iron x?

[@SkyCarCare]

Hi Rap, Diluting will weaken the product which you dilute. In the case of Iron X you are better off NOT weakening it :). Thank you!

[@maximo573]

Please make a video "How to wash a car " correctly from the beginning until finish with all the product that we should be using

[@SkyCarCare]

Here you go! kzbin.info/www/bejne/rYPXdoeid9ala8k

[@rickebert3849]

Besides the smell is there any difference between Iron X and Iron X LS? Thanks

[@SkyCarCare]

LS is also stronger and doesn't dry as fast.

[@thesir8028]

Those bucket are pretty cool. Where can I buy them. Great video.

[@SkyCarCare]

Thank you for the feedback!. And those buckets are fully available on our website. We offer kits that come with the lids, grit guards, and the stickers are sold separately. You will want the premium bucket stickers. Here is a link to some of the bucket kit options. www.carpro-us.com/search.php?search_query_adv=Bucket+kit&section=product&_bc_fsnf=1&brand=33

[@snsum2853]

What is the shelf life of Iron X paste and liquid spray?

[@SkyCarCare]

Bare minimum of 2 years. It can last over 5 if stored from start to finish in the right environment... but try to use by 2-3 year mark.

[@SuddenDeathSyndrome]

Could ironX paste be added to a foam cannon with for example water or snow foam?

[@SkyCarCare]

Its a cool idea but I don't think it will mix very well. You would probably be better off with Iron X Snow Soap at that point

[@walenrod17]

Does IronX or TarX or Trix require to be washed off by Reset or MulitX before clay&polish&ceramic? To not interference with the polishes or bonding of the coating?

[@SkyCarCare]

Hi Walenrod, Iron X does not need any Reset or Multi X to remove it completely from the surface. TarX and TriX however will leave a little something behind and should we washed off with Reset or as you wish.

[@walenrod17]

@@SkyCarCare thanks a lot! Will it not come of with eraser after polishing? Or will it do anything bad to the polish power?

[@SkyCarCare]

@@walenrod17 It will come off during polishing but it will affect the polishing and also can be more aggressive to the paint to have extra solvents on the paint OR could cause extra lubrication to change properties of the polish. Technically you "could" do it... but maybe not "should". You are mixing chemicals in a way... so we couldn't say it is the safe route to go or the best practice.

[@Steathl]

What about using IRON X Soap with IK foamer on wheels?

[@SkyCarCare]

Yes, you can do that no problem

[@Steathl]

@@SkyCarCare have you done it? Wanted to know if you have seen any difference on cleaning abilities from standard IronX application vs Snow Soap IK foamer

[@SkyCarCare]

@@Steathl We have not used IX SNOW Soap in the foamer but Alexandra did use IronX in the alkaline sprayer. There is a difference in iron removal between the two products. IronX is superior to IX Snow Soap with regards to iron removal -Corey

[@ms_garage___7301]

🤩🤩🤩🤩

[@lv9530]

You all are the best, ordering all of my detail supplies through your site!

[@SkyCarCare]

Thank you. Thank you. Thank YOU! Make sure to create an account to get 3% back on your orders!

[@lv9530]

@@SkyCarCare already have placed three $150+ orders 😄

[@gregsullivan7408]

Nitpick: time 2:05 IronX paste is MORE viscous, not less viscous - "viscous" means "thick". 😀

[@SkyCarCare]

Oh, did I say less? Hahah! Thanks!

[@meanf1502]

Is it safe for all wheels

[@SkyCarCare]

It is safe for 99.9% of wheels on the market. Clear coated, polished aluminum, chrome, etc. We do not use the word "All" because we wouldn't use on Anodized and there may be some aftermarket cheap finish we are not aware of. All common wheels it is safe on.

[@bbdetailing9123]

Good video and nice Subie

[@SkyCarCare]

Thank you friends!

[@andypimentel356]

love the videos man fr

[@SkyCarCare]

Thanks Ox!

[@hakimrahman85]

Thank you again

[@SkyCarCare]

Thank you Hakim!

[@ryant1090]

What is that pressure washer?

[@SkyCarCare]

That pressure washer is a small 1600 PSI model from Ryobi. We would recommend upgrading to the 1900 model however. This was one of our staff members models. We have since moved to the slightly more powerful model. Its the perfect size and power for detailing!

[@jaywill1978]

Good stuff thanks for the demo!

[@SkyCarCare]

You bet. Thanks for watching!