$40 Crawler Climbs a Tree! Upgraded Dual Motor WPL C14 fits C24

[@DBbyDesign]

Whats super cool with this setup is. You can do dual esc and setup the front to be overdriven on demand. To dig and pivot for better turning on course.

[@simontromans2748]

Bet that tree was left feeling it's life has been fulfilled!

[@jasonsmithsrrcfun9259]

That thing will climb forsure

[@rctrophyr79rus41]

Stunned tuning !!!! super-duper look !! yes with these motors, he passed through! looks like a real trophy wheelbarrow !!!!👍👍👍👍👍👍👍

[@salihinrahim1955]

May I know how to solder the two red wires given? Do we connect the positive side on the first motor to the positive side on the second motor?

[@TomleyRC]

Yes, positive to positive 👍

[@realseesreal120]

That tree is very impressive 😂

[@TomleyRC]

Haha

[@simoncycling6685]

Hi have installed metal links if so have measurements ..thought I'd give c24 full upgrade winter project

[@phantomshtter]

OMFG THOSE DRIVELINE ANGLES!!!😂🤣😂😅 That is beyond fucked.

[@TheHurriedRabbit]

🤣🤣🤣🤣🤣🤣

[@PedroSilva-yv5df]

I, can u explain how u wired the motors?? Couse I install the same n30 in my c14 but they don't work at the same time when climbing! The axle with less pressure rotates the wheels first, when I pull the trigger they go all 4 wheel! But I think I connected the motors different than u!?? Thanks.

[@TomleyRC]

You have to wire them in parallel, so positive to positive, negative to negative.....

[@garettbodel3002]

I couldn't really tell from the video and you didn't really say anything but. Cuz you could have been having your finger on a trigger does it have a drag brake already on. When I look at it on banggood has a button does that mean that you can turn the drag brake off and on. Or program it at all. The one big thing does it have LiPo cutoff low voltage cutoff. I looked on all of them on the site I couldn't see it anywhere I know it's pretty standard nowadays but you never know. Thanks so much for the video. Does anybody have a video of those solid metal axles on a c 24 or c14 truck they say it's compatible

[@TomleyRC]

The ESC has a brake function, but not sure about a Lipo cutoff. The run time is so long with the Lipo I use that I've never run it right down. In fact, I've used this ESC with a few trucks using Lipo's and never had one get that low....so it's either got one, or I've been lucky and never ran it all the way down. I'll check next time I'm out running.

[@cookiemonsta_za]

I've installed this 2 motor gearbox, but my rear wheels turn the wrong way. Help please!

[@TomleyRC]

Flip your Axle, or swap the wires around on one of your motors 👍

[@policopaul7961]

can you make it fully proportional and act like a good crawer,cuz I wanna buy one and make it good.

[@genericytaccount93]

How did u get the plastic drive shaft to work

[@garettbodel3002]

He showed you he put the soldering iron on the metal shaft going into the plastic. Jill it loosened up and then he quickly pulled it out and put it back in

[@bradleypendleton202]

Great video dude

[@TomleyRC]

Brad's Rcs Cheers Dude 👍🏻

[@rcnoob6231]

Hi just started watching your videos very helpful! I have a quick question would this or the 370 motor be a better choice?

[@TomleyRC]

Go for the 370 over these, or the new C34 single speed one. These little ones don't seem to hold up too well.

[@rcnoob6231]

@@TomleyRC wow didn't expect a reply thank you! You earned a new sub!

[@MrsRabbit8]

@@TomleyRC dang it, I just bought two of those N30 motors. Well I guess when they go bad I can switch. It's two bad, they are compact and easy. Seemed smoother in other videos I've seen, but it looked ro be performing quite well in the video, though perhaps your driving is quite good.

[@supastihl89]

Nice, looks good. Are the shafts binding a bit creating that hop?

[@TomleyRC]

Hooptie Rides&Reviews Yes, I briefly mention it at the start, the motors ideally could be about 2mm lower. 👍🏻

[@supastihl89]

Oh sorry didn't turn up the volume at first. 👍

[@TomleyRC]

Hooptie Rides&Reviews No worries dude....sometimes when I’m talking it’s best to have the volume down anyway haha

[@MrsRabbit8]

@@TomleyRC i missed that in the beginning too, thanks for clearing that up.

[@Greenhatcreative]

Hi, does the Micro Servo you recommended work with the original transmitter so you get the proportional steering? (or do you also need to upgrade the ESC to get it working?)

[@TomleyRC]

When you upgrade these with ESC & Micro Servo, you need to also get a transmitter/receiver as well.

[@wetlyd]

@@TomleyRC So which transmitter/receiver would I need?

[@wetlyd]

also what battery should I use?

[@TomleyRC]

@@wetlyd I use this Transmitter.... www.gearbest.com/rc-car-parts/pp_624378.html?wid=1433363&lkid=15243121

[@garettbodel3002]

Just get yourself the FS Fly Sky controller. They're like $23 on eBay. Get one of the ones it only uses the four batteries. And the one that's compatible with pretty much every receiver that FlySky makes. And you can't go on if the receiver ever goes out there like $7. And you can buy a few of them and put them in different vehicles and just use the same controller. The one that has all the different channels and everything I had it and I sold it because. My son would get a hold of it sometimes and mess up all the settings and then I have to reset everything anyways so I just go basic. And if you want to get another controller. You can just buying them back and forth you can run all your trucks on those receivers that's why I stay with the FlySky. The receivers are cheap and work with all their controllers. Can't go wrong great quality to. About $10 cheaper than the one that he suggested. Plus if you live in the states there's a lot of companies on eBay that have them in stock in the states and you can get get your controller or even extra receivers in about 3 to 4 days. Everybody sells them. But when you're looking on eBay just make sure that have an address that's in the United States a make sure you get it quicker. Always make sure. There's a guy in New Jersey that I get all my stuff from and I'm in Massachusetts on the I'll get my receivers in 3 days. Last time I bought two of them for $16.48 delivered to my house in three days kid can't go wrong

[@Mstom178]

are those stock d-rings?

[@joecachia2]

Hi There. great vid. I'm thinking of building a C24 with DUAL MOTORS ( more clearance ) . The dual motor boxes on ebay seem to have the N30 . can these be run with 7.2v or should I stick to 6V ??

[@TomleyRC]

I run this one on a 7.4V Lipo....so it 'Should' be fine 😉👍

[@joecachia2]

Great thanks.

[@Bergwacht]

no dude that thing sucks. dont buy that dual motor thing

[@joseflindbom7680]

Do more videos of it whit the tracks!

[@TomleyRC]

They don't work very well on the C14 with twin motors.

[@DannylCara]

Is double motor better than 2 speed gearbox?

[@TomleyRC]

It depends on what you need it for. Twin Motors give you more torque for crawling but are slower, twin speed is good for trailing and a bit of climbing, but I'm not sure how good it is for Rock Crawling?

[@DannylCara]

Thank you sir

[@isaiasmarquesferreiraferreira]

Very nice , I'm building a 8x8

[@TomleyRC]

Hope you make a video of it 😉

[@silverado9964]

Cool video

[@TomleyRC]

Cheers dude

[@potatopower4026]

Seems like that upgrade can certainly improve wheeling ability. I purchased the upgrade kit for my c24 but never installed. Did it help with top speed at all or simply acceleration and climbing? Thank you! Loving all of your videos and advice. Still torn between. The MN90 and the Fayee version though. But have you seen the MN96 on bang good yet? Preordering has started! I want it!

[@TomleyRC]

It's pretty slow, and lots of torque. Strips the gears to easy though, so not one I'd use anymore. The 370 gearboxes are good for these. I have seen the MN96, not to keen on the extras on it though. The Fayee is better than the MN90 IMO 👍

[@Bergwacht]

my rear diff was gone in the first 5 minutes with my wpl lol but ok droven wit S2 lipo

[@TomleyRC]

The plastic gears don't last. They are now starting to supply some of them with metal out the box

[@cooperwiggins5968]

Hi, I just recently bought this dual motor kit for my wpl rc car, but it is extremely slow and can’t climb at all. I understand it’s supposed to be slower, but it can’t climb either. On Amazon it says something about how you can change it to second gear. Any ideas on how to do that?? If not are there any ways to make this motor kit go faster and climb better? Thnaks

[@1994RALLY]

Can you send a link for the tires

[@zanepetty3193]

How are these motors holding up? I’m wanting to do this or the 2 speed transmission upgrade for mine. Which one do you recommend? I don’t see how both axles pull full time with the dual motor set up

[@TomleyRC]

I'm not to keen on it now, been through 2 rear motors as it strips the tiny gears really easy. I recommend the 2 speed with metal gear upgrade 👍

[@zanepetty3193]

Tomley RC Garage thank you!

[@cookiemonsta_za]

@@TomleyRC I just bought this car with the deceleration gearbox and servo. Seems I wasted a bit of money. :-( So, I should rather go for the 2 speed gearbox set up? Could you provide a link/links to the best one on BangGood, with whatever I'll need? Much appreciated. Thanks. Love your vids.

[@maninthebox01]

Should have gone with the 2 speed gearbox to avoid the axle chatter

[@TomleyRC]

That wasn’t out when I made this video 😉👍

[@porkhunts]

Did you use the 100 or 300 rpm N30’s?

[@TomleyRC]

It doesn't tell you on the kit what speed. But I don't think they are 100's....seem a bit quicker.

[@MegaKikeGasGas]

Ok, I can do C-24 with those parts.. Dual engine, servo??? If so I will build mine. Thanks bro.....

[@TomleyRC]

Welcome dude....yes a sC24 will be cool 👍

[@nicolaicollado8112]

does it work in stock controller?

[@TomleyRC]

I'm not sure if it will, I haven't tried.

[@matthewho26]

Will the n20 motor fit to the original driveshaft?

[@TomleyRC]

Yes, although I used a bit of glue to fit them as they can slip under load

[@joseflindbom7680]

what are the rpm of the motors

[@TomleyRC]

Josef Lindbom Good question! I don’t know 🤔, it doesn’t say. However my guess is around 200rpm+ as it’s slow but not to slow if you know what I mean. They are back in stock now and cheaper! Link in description.

[@ShenRC]

😊👍

[@TomleyRC]

Shen RC 😜🤟

[@md3631363]

Awesome :)

[@TomleyRC]

md3631 😉👍

[@fixedgear.fl.4225]

Ha.... cool

[@upriyadie9294]

God

[@JJONESFPV]

Did u see the post I tagged u in on Instagram??

[@TomleyRC]

J.JONES FPV Just seen it! Was logged in to my other account so had no notification 👍🏻

[@genericytaccount93]

Oh I see what u did lol

[@meolired]

3 years ago parts suck back then