WPL C14 - Radio and ESC

[@gezdonaghy2456]

These trucks from WPL are really good as there are loads of upgrades. Some really fine builds on here🙌🏼 mines is almost complete after metal everything built in and structure made into one piece.

[@Craiger618]

Great video, brother! I have a WPL C24 kit coming, so your videos have been super helpful in knowing what to expect with the build process. Appreciate the time and effort you put into making these vids! 👊😎

[@cookiemonsta_za]

Same here.

[@spoiler42ify]

After seeing yours run, I noticed I had the same 2wd issue on mine due to drive shaft slippage. Took it apart and locked it up with super glue. Problem fixed. Thanks for the nice video.

[@hubertusgrabner6211]

Hi! I just checked out your video, thanks a lot for the very detailed explanation how to protect the wires! I have ordered a Quickrun 1060 wich should do the job in my wpl with the 370 motor. I am not quite sure how to hide this rather big esc but i am sure it is manageable! Thanks again for putting out your great expertise! Greetings from Austria

[@paulwoolams4007]

this is a great video mate..thankyou i will be doing the same to mine shortly..few more bits needed to do it properly

[@garrykennedy5484]

Please,, I have GOT to know where you got that wire cutting/stripping tool!!!!!!!!!!!

[@henkdevries]

Do you have any tips on choosing an esc for the stock motor? I got the RTR version and want to upgrade the electronics to work with my own rx and tx

[@gfhfmf]

Great job! Btw can I get proportional steering if I replace servo on my stock C14? Thnx.

[@RCMojoTV]

I believe you'll need to swap the electronics with one of the new WPL boards, which could have the benefit of engine sounds too if you choose the right one. Or change to hobby grade electronics

[@andysmith4394]

Nice work me my son are fly boys and we have just got into crawling it's lots of fun with lots of mods ☺👍

[@AgaYuditraStudio]

Im waitting for axle gear solution. Coz i have same problem.

[@MrSpot41]

Can you give me some info on your 'Wire Stripper' tool please ? Very helpful video. Thanks for posting.

[@NordicRC]

Looks so great.

[@MonsterXclipse]

Im having an issues with the motor not turning sometimes it will go back and forth then ill stop working and the steering continue to work. The red LED lights up when you hit the throttle back and froths.

[@thedigitalshack]

What type of esc are you using? Thanks

[@islandspec326]

You do a driveshaft vid yet?

[@angelozannotti8392]

where you have set up the circuit for the lights

[@SILVIODQUEIROZ]

Hello Friend Where can I get a plier like that?

[@glowworm3345]

How’s the drag brake working with that esc? I can’t get mine to slow my truck down even on some pretty small downhills.

[@RCMojoTV]

I haven’t driven the truck for quite a while, but I remember the brakes working in forward/brake/reverse mode but there not being any noticeable drag brake in forward/reverse mode. When I get to the electronics on the C44KM I’m going to be a bit more scientific about the testing

[@mikesipes5305]

do you, client work on trucks like eight -teen wheeler trucks like converting a push around trucks to rc. If so I have one for you to do for me

[@rjugoschua]

Thank you for the video Sir :-)

[@lylecatacutan2212]

I placed a 10A ESC with 6CH receiver and a 370 motor on my C24. It runs but doesn't have reverse. Also using a 6CH radio. Can you help? Thanks in advance.

[@codiekennedy825]

Does your esc have reverse? And I'm guessing you've checked your transmitter. Haven't seen to many 6 Channels without reverse but I mean throttle trim or any other settings it has

[@davekessing2266]

how to make from a toy grade rc car an hobby rc car very nicely build gotta love those small crawlers

[@rcsnapon2132]

Awesome video

[@anmwolfrc159]

how did u fix the drive shaft

[@brennoncantrell5867]

Can you send me a link to the parts. Thank you

[@rcjan5690]

Thank you for sharing this ...i`ll follow step by step..Big tumb up..

[@harrisonpaige1594]

I’m using 2 850 mah 1s lipos with jst series plug

[@Leonslockpad]

Ive just ordered one great tips well explained my friend this is my go-to series when my order turns up👍😎😊😊👍

[@mikeymike3240]

Hi Nick, another great video. 😀 👍 👍 👍

[@Rhodeislander]

Nice job on the video, thank you.

[@paulbags123]

Am the only person in the world who has ordered the front and rear full metal axle & drive shafts mod for this truck ? By the way I’m enjoying your videos a lot you are doing a great job 👍

[@mattg6614]

Paul Blanchard nope, I ordered my axles before I ordered my kits. This way I'll have them ready to go when I strip/break the plastics.

[@frankymal8640]

I take it that's a fwd/rev esc with brake?

[@RCMojoTV]

There's no brake, just forward/freewheel/reverse. Given the size and weight of the truck it works rather well though, with the weak motor you can give it a little reverse to slow things down without instantly flipping the truck.

[@kevinc1989]

Dose anyone know why my c14 don't reverse right away after doing this mod ??

[@JDLightnin]

most likely cause is that you used an ESC with brake which would require you to reverse twice before it actually moves

[@JDLightnin]

most likely cause is that you used an ESC with brake which would require you to reverse twice before it actually moves

[@kevinc1989]

Yes exactly ... So what is the fix ?

[@kevinc1989]

Figured it out thanks 😁

[@RC-ty5ym]

@@kevinc1989 Braking is necessary!!! Or are you shifting from 200 kmh direct in reverse? Probably not

[@chrisortiz2640]

Is all you need to get it running is just getting is an esc, reciever, controller, battery, charger.

[@RCMojoTV]

Sounds about right, good luck!

[@roberthopkins4061]

Would you be willing to share a full electronic list of the items you used on the C-14 & B-1.

[@RC-ty5ym]

Is it that difficult?

[@miniRCSports]

nice work and look :)

[@brodygoodwin4006]

Cool

[@jovzzrc835]

Need full metal axel 😊 nc video

[@00godlovesus]

Thank you fine sir!! M

[@garrykennedy5484]

LOL,,, 3:11 he said underware. LOL.. Hey,, this is my mid life outlet, lemme have it.