$40 Side Skirt Extensions! DIY

[@cassanovamousollini]

Construction 101: - never pull back on a skillsaw - never cross cut with your arms/hands/fingers in the way, hand saw or powered saw(lucky you only had a cut) Just an advice. Steel shows no mercy on human flesh, I've seen it.

[@gloriousrunningpotato]

Also never just self tap into your car. Especially under it.

[@hakimdurand8427]

Why ​@@gloriousrunningpotato

[@OfficialMeechMusic]

3:15 never cut towards your hand, learned that in middle school cooking

[@Chunetime]

dumb clean , patience is the key , taking your time getting in done right. Mad respect

[@bondoman2k]

Nice idea! Made mine even cheaper than that. Don't have a Lowes nearby, but have a Home Depot right up the street. I used styrene baseboards (for the inside of a house..lol). And only have to make one cut on each side for the length. Around 6 bux a side. Including paint and primer, I got around 20 bux in both sides! :)

[@justinbuice]

That's a clever idea!

[@franchisefred4066]

Thank you

[@ranbirmarzara1839]

That angle grinder is like 2 cm away from your hand, gives me anxiety watching him using the grinder

[@csmers3743]

Came out clean af!!! Great idea, I'm a Lexus guy but your BMW is 🔥

[@NOLFOL]

Good job ....I did this exact Same thing on my tiburon back in 2007 and even made a front splitter Just need a big enough pvc board which are not cheap (got them free from work) but still cheaper Then the alternative. ...can even wrap them in carbon wrap

[@eddiereyes3235]

Great job on the side skirts. I am building a lower front spoiler like this but using polypropylene ...

[@lambertroy6647]

When you were using the hand saw I was waiting for you to cut yourself.....then sure enough you did lol,skirt extensions look great but Some ppl should not use power or hand tools lol

[@sagaar22]

LMAO i was gonna say the same thing then i saw this comment.

[@MrTaz345]

Hands down best side skirt extensions vid.

[@CuttinChris]

As soon as I saw you make one swipe with the wood saw I was like hes about to catch his hand. Lmao wasn't disappointed

[@dailydoseofaure9403]

Does someone have the measurements I unfortunately had to jb weld my sideskirts on and I can’t remove them

[@combatshox]

no primer before spraying?.also black side indicators.sweet.

[@dhillonmaharaj4863]

What was the size of the PVC that you used ?

[@rayk141]

Its about 5/16" thick, 5.75" wide and 8ft. long. Also since its pvc, you can heat form it with a heat gun to soften it, bend to shape, let cool and retains that shape. This has many possibilities for other mods, and def. cheap cost. PVC pipe glues work on this as well.😉..✌✌

[@BuddysDIY]

Looks dope. You get the PVC from home depot or lowes?

[@chamsok4379]

Awesome video with the side skirts. Wonder if that would work for a front lip and rear diffuser. Oh and use a guard and some gloves when you're using the grinder. Your hands will thank you.

[@bondoman2k]

Would work on the front lip/splitter, but finding this in a size large enough would be the problem. Most people just get large sheets of ABS plastic from the hardware store to do that with. Might be difficult to use on the diffuser, because of the bends sometimes involved in making those. But it might work, I've never made one of those before. ;)

[@syngates9876]

Does the paint stick well? I’d think with a surface that smooth it might peel easily.. but great video! Definitely gonna take this route to do mine, thank you! 👌

[@dailydoseofaure9403]

Primer before for better results

[@baconnbootyy]

Love this idea! Saves a ton of money from buying it already made lol

[@pacaa]

It depends where u live in europe we need to buy if from someone who made it and have certificat (tuv) so we can Atest it and be legal... Yeah so stupid, but whatever...

[@madfisherisme]

Damn bro that looks awesome good job I'm thinking about doing this on my e46 I need something to hide my underglow I wonder if it would be thick enough to hide it

[@eastsideofthetracks8311]

I went to lows but they only had a thick board

[@TheBlackSheepprojects]

Very good idea pal they look good although you should never use tools again. Sawing towards your hand and then your grinding disk was off centered or broken how you have all your fingers is beond me :) nice DIY though

[@esgworks]

l8on6661 Lol thanks man! 🤣

[@JoseRamirez-om9om]

What’s the name of the material where can I buy it..and how thick is it..I really want to do my to my bmw ...

[@cristianalvarado38]

I can’t find PVC UTILITY plastic boards at Lowe’s does it have another name? I walked all through Lowe’s and I couldn’t find it

[@ruderocky1431]

What about when they get wet? Won’t they absorb water

[@raymondjeremiahchikakesta7404]

You indeed did an excellent job. i am looking to do mine and from your video, i am confident that i will make mine. Thanks

[@C300AMG]

EPICK! very nice brother 10/10 for the DIY work !

[@thesafaripete]

what was the size of the pvc sheets you bought and how think?

[@shanekerouack5367]

Hey bro what were the names of those boards?

[@Cheska2012]

What thickness of the board which you used? 😊

[@Osqyrr]

how thick was the plastic you used?

[@InfiniteGamerXI]

Bro that’s sick! They came out great! Question, how have they held up throughout the years and also in the rain?

[@esgworks]

They were great! Until I hit something on the freeway and I broke off my entire skirt 🥺 lol other than that they lasted me a long time!

[@dolothebandit]

@@esgworks that happened to me

[@bondoman2k]

Unless you break them like the owner here says he did, the weather doesn't affect them. They are 'pvc' (the receipt called them that), meaning they are actually plastic. Won't warp or get weak like using wood. ;)

[@toddlondon230]

Can you give us the dimensions, pls??

[@martynas7464]

What are the measurements?

[@jannacino5495]

Is that a plastic?

[@garydeandeery]

Nice job but do you know how close you was for that blade to fly apart

[@HH-uv4iw]

What headlights are those😍

[@luk4o666]

I didn't get what material this is...

[@lptojessie84]

What’s the skirt made out of?

[@KianWard-b9q]

she looks amazing bro she would of looked even nicer if you had wrapped in carbon fiber but thay still look stunning bro thats my next mod on my f10 hv them on the way stunning content bro looking foerword for mor content👌👌👌👌

[@darren7784]

what material and what dimensions??

[@r8228c]

Sick as hell, props..you should do that for a side business.

[@bbrady9673]

looks good but im not felling the wood grain look on the one side.

[@paddyroesir]

Looks good, I’m from Ireland and I have to admit that circular saw is strange looking!

[@ZaighamAli47]

Been waiting for someone to make a diy for this for the E9X. Great job man ✌🏼

[@raymiemac71]

Great job dude.. Just as easy to make a front lip or splitter. Nice car.

[@bj_from_the478]

Nice video sir keep doing your thing🤙👍🏾

[@MrKarlfebel]

What material is that

[@mhaag1619]

These look great, well done and thanks for sharing.

[@JoseRamirez-wv3pl]

What is that shaver thing called at 3:49 I’m trying to buy one!

[@esgworks]

Just a grinder !

[@kareemhenry2282]

Loving ur car bro💯💯💯💯

[@victormedina5005]

Are you from Riverside?👀👀

[@nickguillet8235]

What was the thickness of the board you went with? I went with 1/2" but it looks off imo

[@dreybh7841]

Did it look bad? Bc I dont want a crappy job on my e36

[@usernameunk]

@@dreybh7841 did u do it? looking to do this for my e36

[@r2rogalan]

I am surprised you dont have a rear lip spoiler

[@Mrcover2]

Great video but geez I wanted to take that spray can and go left to right. Wasting so much paint and time.

[@andrem6494]

Qual a espessura do pvc?

[@tonycervantes4816]

Bro what you do to look you wheels like this. In you car.. love it

[@ruderocky1431]

Stretch your tires.. get thinner tires and have them stretched.. pretty dangerous tho

[@ShadowSpeark]

Can you send me a project of them?

[@neu1113]

Good job! the skirts look dope! Btw, where'd you get the m3 bumper and how did cost you to get it painted? I'm bout to get one. I bought all my skirts and splitters online wish I would've seen this earlier I could've built my own PC skirts too. Lol

[@JoseRamirez-wv3pl]

Advice please, do you think a staggered set of rims: 18x8" ET35/18x9" ET35 wheel sizes would be ok to put onto 225/40/R18 and 245/40/R18 (on a 2009 323i) or those tires aren’t good for the staggered set up? I subscribed too!

[@esgworks]

It really depends on what you’re going for. I’m sure they’ll fit but that’ll be a meaty tire setup. What I do is convert the width of the wheel to millimeters; for example, my fronts are 10” wide. 10” = 254mm so a perfect low-pro tire size choice would be 255/35/18 but I wanted a stretch for more clearance and lip to fender fitment so I went with 215/40/18

[@cb2511]

Glad I watched this before I got on ebay 😅

[@danielmaldonado3782]

Awesome dude!

[@walperstyle]

If dude ever figures out saw guides and router templates…

[@alievedits7628]

That's a great idea! Keep up the grind man

[@shanekerouack5367]

Nice job bro! I'm gonna make some for my 335i

[@Psychicrevan]

Not bad and thanks for the idea. I will try this out.

[@yanikherman3182]

What model rims are those ? I love them

[@pinoypyroguy]

BBS rim

[@rayk141]

Great vid. Thanks for sharing.

[@franchisefred4066]

Nice. But should’ve added at least half inch more poke

[@timthongkham1716]

Love the videos man! Keep it up, and when are you gonna drop more EUROGANG stickers? I need some lol

[@esgworks]

thank you! I’ll have more soon!

[@nuced2]

Very useful DIY...got me thinking. I have to ask...can you drive, it it fast, or is it a show car? Great idea, nonetheless. Dangerous craftsmanship skills, but I’d be lying if I said I didn’t get cuts and scrapes; with protection and knowing what I’m doing. I think it’s a right of passage to get a DIY handed to you...def be safer than you are on this vid. Good luck on future projects.

[@tonycervantes4816]

What brand are you wheels

[@luis4210]

Tony Cervantes BBS

[@tonycervantes4816]

@@luis4210 estan bonitos men. Que modelo son or what number...

[@jorgegeneroso2422]

Looks great yo

[@morgnhope]

e90post diy?

[@xoarx]

i could see that cut coming from a mile away. why would you cut towards yourself with your hand inches from the blade lol

[@some_car_guy]

Damn I remember getting an e90 as the same time as you started uploading videos remember how you had about 200 subs I believe remember having the same water pump problems anyway I’m happy that your e 90 came a long way something I wanted my e90 to be but unfortunately I totaled it

[@ReScopeTM]

Absolutly nice. Greetings from Germany

[@O_M_i_B]

To begin with why not use the straight edge on the out side part. 🤷🏻‍♂️🤦🏻‍♂️

[@esgworks]

Klen 330 yeah I realized after I cut it, but still managed to get it straight so it’s not a big deal

[@andreww2111]

U saved me around 250$ good video

[@dartvaderisasavage8239]

Use a grinder guard

[@rafaelsoto2245]

Dope DIY bro.

[@TheAlmighty.Z]

I knew that was gonna happen with the saw. Lol

[@robertquiles5347]

Great job.

[@alibrown7689]

Is that a wrap or spray job

[@maxx1nsane]

I am shocked you still have all your fingers :D

[@fondoo]

Looks awesome!

[@MiguelLopez-wi5nm]

Damm Man looks sick! Great video . Runing to lowes right now!,,thanks . Suscribed!

[@chiefslief1886]

Very Nice !

[@walperstyle]

Self tapping screw, LOL.

[@CuttinChris]

Bro put a gaurd on your grinder asap youre gonna get buck one time and embed that bad boy into your hand

[@mattsauto6462]

Dope asfff brooo

[@tylersherratt4466]

Bro got air ride but won’t spend $400 on carbon fiber side skirts 😂😂

[@esgworks]

Im poor

[@quickscoper39]

Use to do this all the time years ago haha

[@quickscoper39]

But now im a bimmerboy so i cant :/

[@jamarclark4921]

That honestly looks great, wish I would have done this before buying 250 dollar carbon fiber side skirts for my g35 coupe fr

[@everlemus296]

My mans all lots a whole finger

[@staticfb2209]

Looks dope

[@R-power]

You are a genious

[@BMWI-gk9wh]

good video!

[@kristapsdaviskomarovs4709]

That blade was way to close to your fingers 😁

[@SteevWest56]

I’m doing that I’m not going to spend 500 for the side skirt 👍