40v MAKITA BEAM SAW Cuts Deeper Than Every Cordless Saw on Earth!

[@ToolsAndStuffOFFICIAL]

Which thumbnail did you click on? A. 2 Saws on bench B. Worlds Largest saw (with saw being held) C. So F_____g Big (with saw being held)

[@srowlandson]

B

[@rickykang4671]

B

[@riba2233]

C 😁

[@ToolsAndStuffOFFICIAL]

@@riba2233 I'm glad that one is being shown... I had my doubts.

[@Slaney44]

A

[@KravchenkoAudioPerth]

I ran the corded version of this in the early 90's it's a beast. Love the brake. And no cord!!!! We were doing large timber fences, 190mm square posts. Almost cut through. Mark

[@SheyTaylor]

Big "kid showing off his xmas gift" energy. lol

[@smert_rashistskiy_pederacii]

18:15 It literally cuts the "table" like in those cartoons and so on. It's HUGE!

[@ThielTube]

We need this new spin test on all the circular saws in the future!

[@colinwilson8747]

Tools, Always fun to see you with the way out tools.

[@ToolsAndStuffOFFICIAL]

Got another way out one sitting on the filming bench right now.

[@toolscientist]

@@ToolsAndStuffOFFICIAL please be the Olive Harvester!

[@Dude-xv4os]

Makita makes the best saw blades hands down, I got the Makita HS001 imported from Japan based off your recommendation and it’s amazing! I love the dual speed mode.

[@ToolsAndStuffOFFICIAL]

Try the fluorine coated blades if you haven't already, they cut beautifully and last a lot longer.

[@sigi9669]

​@@ToolsAndStuffOFFICIAL I'm not sure if I've just learned something valuable about saw blade coatings, or witnessed a deep joke about keeping ones saw teeth hard and free of cavities. I also don't believe I want to know. Because I've decided on the latter, and I started my Saturday with a good laugh. Thanks!

[@clutteredchicagogarage2720]

@@sigi9669 I love Makita blades, but I hate the fact that they coat them in teal paint, which inevitably rubs off on the wood that you're cutting. The best finish for a saw blade would be some sort of clear rust inhibitor coat. Otherwise, I love Makita's thin-kerf blades as well as their circular saws.

[@toolscientist]

Just need someone to figure out a way to turn it into a table saw

[@riba2233]

Ouch I'm sure that someone already thought of that idea, not sure how smart it would be 😁

[@ToolsAndStuffOFFICIAL]

Oh yeah, cheers for that...

[@technologicalsingularity1788]

​@@ToolsAndStuffOFFICIAL Dude, I'm wating for your new video. Don't need production masterpiece. Just Interesting stuff only you can say would be very appreciated.. But no Pressure. 😅😅

[@a-carpenter9229]

They should change the base so it can run on their guide rails

[@Lizaard69]

I bought a corded one and almost did it. Decided against as its so scary and big

[@riba2233]

Wow such a nice tool, too bad you can't keep it right 😁 Awesome, been waiting for this one, thanks!

[@timhowell6064]

I've run the corded version of this saw, it's a hell of a tool.

[@AaronNagle-f8w]

It’s looks cool but I’d probably be lucky to use it once a year.I use the 270 a lot along with my 185 rear handle and 165, there’s nothing I’ve ever built that really needed a 158mm blade capability so far.

[@davidatkins1211]

I have the makita 305mm stone saw. Unbelievable bit of kit especially with dust extraction. Cuts all the way through British depth bricks unlike Sthil Saws

[@sassall4284]

This thing is glorious

[@patbird9694]

Welcome back mate🎉🎉. Hope you had a good break.

[@josephmerz2666]

i have the corded version .due to it's size the cord seems to be more of a problem . i have a dedicated rip blade and then the original which doesn't rip so well ,cross cut blade. this new saw has some valuable features/upgrades that should make it the star

[@stevenlee1637]

kickback on this would send you flying back to the stone ages

[@ToolsAndStuffOFFICIAL]

Most cordless tools have built in protection from kickbacks or will usually stall rather than kickback. This model has AFT (active feedback technology) which solves this issue.

[@gaz1967]

A makita tool that makes the 8ah battery look relatively small.

[@ToolsAndStuffOFFICIAL]

I've got another new one sitting on my bench that does the same thing.

[@gaz1967]

@@ToolsAndStuffOFFICIAL what is it?

[@ToolsAndStuffOFFICIAL]

If you were on Patreon or Instagram you'd already know...

[@BiohazarderV]

My guess.. 1 inch Impact wrench

[@BRICKIFIER]

​@@gaz1967Why on earth would he need one of those.

[@veitjacob9764]

Welcome back, tools! But 40min?? Dude!

[@ToolsAndStuffOFFICIAL]

I tried to keep it to 15mins... I failed.

[@veitjacob9764]

​@@ToolsAndStuffOFFICIAL no complaints. This beast needs long praise.

[@nickk7653]

@@ToolsAndStuffOFFICIAL "It looks like we have 10 minutes left" continues for half an hour. 🙂

[@disco_falcon1895]

I have the 10" Makita XGT and love it. I also have the corded 16" Skil and its awesome when you need it. I'll be seriously tempted if/when they release this in the US.

[@patbird9694]

I might need to change my health insurance . If I ever buy that 415 mm circular saw

[@danielgarbuzov8106]

Wow! Any idea when it'll come to usa? I really need one! As soon as the 10¼" was anounced, i pre ordered one. I really want this!

[@clutteredchicagogarage2720]

If I worked regularly building porches with 6x6 posts (apologies for the freedom units) or in timber framing, I would love to have this saw. In North America, there's a lot of timber framing done on the west coast -- everywhere from California up through British Colombia in Canada, and this saw would be awesome for framers who regularly need to cut big posts and beams. In Chicago, where I live, many buildings have 3-story wooden porches supported by 6x6 posts. I know guys who have built dozens of those, and I'm sure they'd love to have these saws just for the cross cuts that they have to make on the posts. For anything other than cutting big posts and beams, it makes absolutely no sense to use this saw over a smaller circular saw.

[@vink6163]

Is there anything you can put on the blade to strip the paint off without damaging the blade itself? Also according to the manual the four battery LEDs mean > 75% charge, so the battery has to be at least a quarter used before it drops back to three bars, that's probably why it stayed on four bars for so long. Still pretty good it took all that to only use up a quarter of a 4Ah battery.

[@ProToolsApproved]

I'm with ya on rarely using the standard 7.25"/165mm, even then it's a blade left rear handle. GOOD GOD MAN! LOOK AT THE SIZE OF THAT THING! I'd rarely if ever us that beast, but I want one!

[@ToolsAndStuffOFFICIAL]

7.25"/185mm

[@BorisBlade7]

I think i'd wear those chainsaw safety pants if I had to use that. I was wincing just watching you cut and seeing that giant blade with the guard fully pulled away as you finished cuts and realizing how fast that could fall back toward you. 😬 Awesome video as always! I have so many makita tools, I wish i could justify getting that too, but that would be a tough sell.

[@arbyars.chicksawdust]

Your hands look tiny when you hold this saw. WOW!

[@whya2ndaccount]

5:00 And the mystery bolts holes .....?

[@Teddysaw1988]

this is amazing! kinda strange though thats its not 80v? am i wrong?

[@Aspire198]

This thing has 'commically large spoon' energy Unreal

[@CSLFiero]

cordless beam saw is not something i think the world needed, but it's a funny world we live in after all

[@БулатБасыров-у2щ]

∅415 внушительные размеры. Благодарю за показ Булатный лайк 👍 мой

[@nickk7653]

That jerk when the brake finally engages fully and halts the blade's momentum... dear god that's some rotating mass right there. What is the selection of blades like at this size?

[@ToolsAndStuffOFFICIAL]

I've only seen 35 and 50th so far, but I haven't actually looked yet.

[@aaronoconnor606]

There's decent selection of blades that size its a common size for sliding table saws. most of those will have a thicker kerf though freud/diablo makes blades for circular saws that size. The makita blades will be the best suited for this saw because of the thin kerf wont use as much battery and should cut faster.

[@cpzmelbs]

Would ya just look at it. So cool lol I’d ride this bad boy to work each day

[@bullard62]

Loving those safety sliders😂

[@ToolsAndStuffOFFICIAL]

First time these ones have appeared in a vid. They are super comfy.

[@SW-ot7bf]

MONSTER 😱💪💪💪

[@AnonVideos]

That’s an absolutely massive unit there 😂

[@UKTOOLTALK]

Boooom back of the net!! Tools is back!!!! Great video!! This saw looks scary as fuck!!!!

[@creativecityis]

Would love it if it could cut massive angles! Like 70 degrees It’s kinda pointless with smaller saws as the depth is minimal, but with that saw

[@jpbiscaro8694]

The kick back on that saw would be terrifying.

[@thomaslhm1650]

Beauty

[@HuskerHardware]

I think my favorite part of all of this was your rocket that says "ASS" on it.

[@videogamewire]

I'm gonna replace my 7 1/4 with this.

[@Tom-sd5ru]

U got any info on new makita cordless finish nailers

[@ToolsAndStuffOFFICIAL]

Yes.

[@spilleradam]

I think that saw should have been 80 volt, two 40 volt batteries

[@kc0lif]

nah

[@babalawohrg]

Got the 5143r, 355mm. Cuts 130mm.

[@lenin972]

This is insane, I thought my 235mm saw was a beast 😂

[@danabenjamin3300]

Besides home owners who might get one these are gonna end up on every construction site and saw mill in the world lol...makita come on with the different amp f batteries..!!!!

[@nominalvelocity]

I have no need for this beast but by golly I want one.

[@jimkane9832]

This should have been 40v x 2

[@TNAN007]

Crocodile Dundee that's not a "saw" This is a "saw"

[@out_on_bail]

What’s the model number of the Japan 165mm saw

[@ToolsAndStuffOFFICIAL]

kzbin.info/www/bejne/haWvZ2eLq9ual7M

[@seanhamilton4175]

🎵 The first cut is the deepest 🎵 depending on how you have your saw set up.....

[@joeludwig8636]

That's just so aggressively big..

[@СергейЖуркевич-й2х]

Макита класс

[@benr8906]

do they make a right sight version?

[@SamuelIrish]

Test the 40v impact driver with a standard 4ah vs the high output 4ah

[@robertrada4783]

I believe you’ll find I ain’t gonna bevel to cut a 45 on a 4x4. 😂

[@kiwigrunt330]

Oh my, what small hands you have...

[@Xenon-t9t]

уважаемый TaS, спасибо за обзор. Было интересно как можно пилить такими большими пилами, и насколько большие пилы могут быть. В России популярен размер 165-185мм. Очень увлекательно было смотреть за вашей работой.

[@plunder1956]

To be honest I am amazed the 2Ah battery can even spin it under load. It looks more like a tool that needs a 1500W Mains motor driving it. Stunningly it's very efficient and almost manageable for such a monster.

[@ToolsAndStuffOFFICIAL]

The tool is rated at 1900watts.

[@Utuber-x44]

We shall call her "bigfoot"

[@JohnKrakatoa]

steel capped boots are forbidden there ??? :O

[@ToolsAndStuffOFFICIAL]

I can't find the face palm emoji, so just imagine this is a face palm emoji.

[@willperry9722]

I bet the blades cost a fortune

[@ToolsAndStuffOFFICIAL]

They are actually cheaper than the Makita blades I use on my 305mm Mitre saw.

[@thomasrogers7614]

Yoooo... 😮❤

[@mickking56]

Hi if you open the guard with your left thumb and hold whilst holding the front handle then the Guard wont be nauseants.

[@TomsTimmervan]

The previous big one kinda tried to look like a Mafell saw, fitting on tracks and retractable guard with a leaver, but this one doesn't unfortunately (except for the blade stabiliser). We mainly use the 185 mm depth of cut saw since 160mm is too little and we rip a lot so cord makes more sense for us (cus this saw and ripping sounded just sad, the mafell goes through dry 18cm thick oak without any problem). But this for a few cuts is not too bad.

[@RenovationsandRepair]

Should be released in the states sometime in 2027😂😂😂

[@elgrosdude7]

the battery unbalances the saw making it stop spinning early

[@Forexfox99]

Cmon Dewalt. You have a 56v system available!

[@danielpike6250]

Underpowered, think best sticking to an electric version. Would not want to try cutting a big slab off oak with that one...😬

[@DharwinMoris]

Its just a nice tool to have but i just realized that it is another useless tool specially in my country where houses are not built with lumber but with concrete, so a 6-1/2" is more than enough for us

[@DysonFraudy]

I hope your wearing a mask