How-To : GY6 125 / 150 Kick Start Gear Installation (Scooter, Kart, ATV)

[@claudio67362]

I have a message for the 101 people who thumbed down this video..you are either envious or totally dellusional because this the only right way to assemble this mechanism..My brother ,your video is excellent,and trust me i only watch your videos because you are a real good teacher..Unfortunately i had to learn all this by myself,too bad i did not see this video 5 years ago when i started working on my scooters,thank you so much

[@49ccscoot]

Thanks!

[@claudio67362]

@@49ccscoot It is the truth my brother,why would as many as 101 idiots thumb your video down?,i have assembled and disasembled that kick start mechanism countless times,and the way you did it on the video its the only way,it does not get to be more perfect than that,you could be keeping it all to yourself and yet you share with accuracy and wisdom all you know and on top of that,freeeee,totally free. and so many unthankful brainless zombies start targeting your channel,that pisses me off..I know these gy6's from A to Z and i watch your videos because i had to learn by myself and i do enjoy them a lot..Thanks a million and honestly,this world makes no sense to me when i see these unfair things,have a good one

[@claudio67362]

What state are you in?Im in Miami,Florida

[@49ccscoot]

@@claudio67362 I'm in MD.

[@KheireddineDjebablia-qk1yu]

Gooood ❤

[@joefulham2768]

Life saver, I took my cover off and most of the components fell out, tried to put it all back, not good 😕 what a brilliantly clear and easy to follow video. Thanks a lot mate

[@lorettacaputo6997]

I thought I was finished doing belt and roller maintenance on my atv engine until trying to get the case cover back in position and the kick start gear got out of alignment. I knew that there had to be alignment marks to position. So I found your video. What a life saver....thanks.

[@NiRvana140]

I can't be more thankful. I feel blessed to have come across this video. God bless you Sir

[@jacks3273]

Hello from England 👋 I have an 8yr old gy6 and had been fixing it up for winter riding till my kickstart broke (always good to have it working as a back up) and thanks to this helpful video it's all fixed and working! Thankyou man

[@Jenny_Digital]

Thank you very much! I lost the alignment, and therefore kickstart action, last time I changed the belt. I wish I'd discovered this video sooner.

[@donberger1267]

This is one of the best 'how to' videos I have seen............for anything. Great job.

[@49ccscoot]

Thanks!

[@jagadishr2405]

Hello these days we were not aware of the science involved in assembling the kicker spring or the dimensions of placing kicker by your video I have been enlightened in arranging these things now I'm expert THANK YOU KEEP IT UP

[@Johnson1281]

You have helped me so much throughout the years. We love your videos and how they are so detailed in explaining how to fix or replace parts on a scoot. Thank you so much for sharing your knowledge with the community. May many Blessings be bestowed upon you.

[@49ccscoot]

Thank you. I'm glad to know that the vids help people.

[@dagmarmabro6290]

This is exactly what I was looking for, very useful, now I know how to fix my scooter kick start . Thank you.

[@aaronbooth9800]

I'm gunna take mine off and give it a good clean as it's stuck/jammed , this video was awesome with all the info Cheers man

[@GTAMASTER-qk9ql]

Brilliant 👍 Just bought a quad with this engine in Been sat many years Kick spring had flung off didnt have a clue where it sat Saved the day 👌

[@jimanonymous113]

We are fortunate that you cared to make such a hi quality instructional video.

[@wackingjack]

Thank You for much for this video, I only watch videos when the mechanic shows all work even can give a few hints to make it easier and perfect! Frank

[@adambarczi6305]

Excellent instructional video. Many thanks!!

[@Triole666]

Thank you for taking the time and effort in helping others. Much appreciated!

[@tims7225]

I wasn't grounded properly I was using green yellow I need solid green now it works thanks for your help n keep making those videos.

[@СлаваКовалкин-е1ф]

Объяснил на английском лучше чем многие на русском объясняют! Большое спасибо за видео!Thanks a lot for the video!

[@Bodneyblue]

I know nothing about engines..of any kind..I don't even drive or ride a scooter!...But I found this most interesting..and well presented. At no point did I feel I couldn't follow these directions if I ever needed to.

[@49ccscoot]

Thank you!

[@atanchy]

This video is one of the best Scooter repair video on KZbin, I will do as you did and give you a feedback .

[@johncooney9332]

Great video. Saved me hours of mental anguish and a trip to the bike shop. Many thanks👍

[@george102472]

All I got to say thank you I'll came home and I took it apart like you had it on the video and I put everything back together clean everything and what happened is the one gear was off a little bit like pushed out so if that I put everything back together nice and the spring correct I try to kick started the pefal up real fast now so thank you you're the man if it wasn't for you I'd be stuck with my 50 and my 150cc

[@49ccscoot]

Glad you got it!

[@arthurgrandson7488]

man i got not idea what are you say because i don't know english laguage, but, your video is really help me, so, thankyou very much for your video ( i was need google traslator for write this commentary xD)

[@martincooke4837]

Well thanks, sir you just got me out the poo took my bike to bits lost my way with the kick start mechanism you saved me is you sent by God lol lol lol from the Mad mechanic from over the pond in England your a star cheers top man

[@rayonknight6149]

great work my kickstarter was loose and not working thanks to you its working now. If battery ever fails its good to have kickstarter working so I wont be stranded.

[@44sasho]

Very undarstandingly simply spoken, well and visual detaled and practical, enough logical where any one can get it, super bravo for the oditor well done ⭐⭐⭐⭐⭐

[@mohdfazli7056]

Thank you man this video really help me i was stuck for a week

[@isaacaldava656]

thanks man! This is exactly what I was looking for.

[@glennpowell.6296]

.

[@marmoa]

you helped me tremendously!! I would just like to thank you for taking the time to make this video.

[@abdovwmk4]

Your explanation so helpful bro keep going regards from Libya

[@moisescanseco8676]

El mejor video,claramente explicado y se logra ver a detalle como ensamblar,me ayudo bastante gracias!!!!!

[@troygaurd9642]

Great video fixed mine by watching these saved me money

[@paavohynynen2654]

Perfect explanation, thanks !

[@garyrichmond7857]

I'm glad I came across this I got a scooter in my shed 150cc roketa and now I know how to put it back together

[@kikinaj1138]

Díky za video jdu to taky udělat podle tebe :) Ahoj Praha - Czech Rep.

[@edysenna]

Hi. I think your video is very good and I understand you better than in other videos, including Spanish-language ones. congratulations, you have a new follower. greetings from Mexico City.

[@49ccscoot]

Thanks!

[@derekmbradford1262]

Ya great video. 15 years ago all i had was a book to look at

[@seamusblack5876]

Best instruction video I've seen excellent 100%

[@Shewwler]

So thankful for this video! Such clarity and visuals for getting this together correctly! You are a very good instructor! Thank you! Now I will search for more videos on GY6 scooters that you may have done and increase my knowledge!

[@Jhovan33]

Exactly what I needed! Excellent video.

[@motorized2105]

Thx. Upon removing my cover the small washers fell out and I wasn't sure which one went on first.

[@brianbosma1396]

Great. Saved me trouble trying to see the instructions on the manual. Just pictures. If you have suggestions on how to fabricate a drive face puller, I would be honoured.

[@49ccscoot]

You shouldn't need a puller for any of the drive faces (pulleys) in this CVT.

[@thesman7918]

Good video. Didn’t need to watch the whole thing but you did such a good job explaining I did want to miss any good info. I’m working on a 83 Aero 80, pretty much the same set up.

[@hectorsilva5043]

Very helpful,thanks man ,I just bought a used 150 cc coolster atv for $50 Buck's and this is the only problem it has😎,now to fix it!!!

[@49ccscoot]

Good luck with the repair and the scoot!

[@MrJockito]

Same as a Honda Squash!! Thanks a lot , Great video !!!

[@brannenthompson9662]

Brillant hannel so so happy I found it as tuning goes there a lot better than your average stick on a BB kit and your scooter will do 75mph bull but tecnically informative too. Thanks

[@49ccscoot]

Thanks!

[@ZulaVideo]

so clear nd smooth. thanks lot ser 🤝

[@mopedmaniac]

Great "To the point" video! Thanks!

[@timhoffner]

Excellent. Love all your stuff. easy to follow, great audio & video. Thanks!

[@49ccscoot]

Thank you!

[@warrenfloyd1484]

Just to let you know, awesome video, however I made a tool.to.make it possible to change the spring without dissasbling anything evcet the spring retsiner, its simply a piece of pipe 1 and 1/4 inch and has a slanted slot about 5/16 deep, works great,will do a video soon, keep up the awesome work!a

[@ImJustKindaHere]

best video on the subject!

[@49ccscoot]

Thank you!

[@mohamadshahriman6950]

Thank you for the video,really helps a lot.

[@paulacooke5466]

Really well explained and demonstrated, best video out there. I'll be trying this job over the weekend...

[@49ccscoot]

Thanks. Good luck with it.

[@paulacooke5466]

Installed it all ok. When I put the cover back on the kickstart just about works for one go. Then it seems to go out of alignment and is very stiff/impossible to engage.

[@49ccscoot]

Sure the spring is right? All marks aligned as shown? No parts worn?

[@paulacooke5466]

Yes think so. Before the kickstart broke I was giving it a real battering when I was starting up. I'm thinking now, that may have damaged it (beyond repair)? Next thought is to repair the electric button start...

[@damikedaevil4582]

Thanks i got stuck with this today. Great help👍👍

[@alejandrociriaco8651]

Exellent video and quality, the audio is perfect Like for everything

[@49ccscoot]

Thank you!

[@VloggingCountry]

I like this video wish I would seen this before I start to fix the 150cc scooter I just gotthe kick starter is not working so I took it apart and im trying to fix it im going to try it again tomorrow now seen I see how it work thanks you for all your help with my scooterthe 50cc 4 stroke I got I have to my sister and you husband we are going to fix it up this winner I hope to have my 150cc on the road so I can say this what a different 49cc 2 stroke to a 150cc I like 150 it keep pulling at 50 MHP and my 2 stroke is about top out there keep up all the grate videos thanks again for your help us all

[@49ccscoot]

Thanks and good luck with your scoot.

[@tfmobilewash840]

How can some one dislike this video?? Awesome video well explained buddy.👍

[@49ccscoot]

Thank you!

[@ronaldslegers1754]

Very well explained video! Thank you!

[@jonnykowe2309]

thx very good video greetings from Germany

[@aiman272]

The GY6 bushings tends to break and all bushings must be inspected for hairline cracks before installing it again. I have my scooter with this problem and replacing them with new ones will make them operating smooth again. This is very useful when your battery is dead since the scooter cannot be pushed start.

[@Eternal27]

This was super helpful thanks 👍

[@jeremiasvasco3]

This video is very helpful thank you ❤❤❤

[@bopeep7080]

Thanks, I needed this.

[@irocss85]

Thanks. Great explanation.

[@TheStifled]

Thanks dude, i have been wanting to do this job myself and now i know. You have some awesome vids & have been a great help to a newb :D

[@49ccscoot]

Thanks!

[@WhitBoss]

Outstanding video!!! Thank you!

[@Fred6ERIC]

Perfect, now i can repair it, it's perfectly clear! 👌😊

[@daisybeagle6259]

Great video mate, thank you!

[@engchoontan8483]

The beauty of petrol-scooters and pretty generic GY6 is some models have both kick-start and electric-start AND push-start = which makes using a battery-powered screwdriver or drill with socket, a possibility. Anything that have a pull-cord can have all three modes of starting by copying the concept and buying the parts and slapping it on with a slight additional welded nut for the electric-drill(with socket, optional clutched-torque settings) That will include old-cars. To add an assistive electric motor which is also regenerative and call ot a hybrid will be a bit more work on the timing-belt to crank-shaft portion. Nut-case is a double-edged joke.

[@terrytraxxas814]

Very detailed and very helpful‼️

[@boydkletter]

Thanks Brother, perfect info! Thanks for your time

[@roller-rolf]

Hallo sehr gutes Video gut gemacht ,Daumen Hoch .Gruß Roller Rolf aus Hannover in Deutschland weiter so !

[@marianozamudio4401]

Thanks man from México puebla

[@markbuchli6477]

Very helpful man, thank you. I appreciate you.

[@akhtermalik3166]

Thank you very much.God bless you.

[@davidscott6935]

Great job, really needed it.

[@eutenka1772]

thanks mate! for a very accurate demonstration 👍

[@fizaraja2205]

Very professional and good video

[@49ccscoot]

Thank you.

[@jurgenblum4476]

Perfekt und sehr verständlich erklärt (y)

[@zekrisalim8219]

It's a good job and understandable thanks more.

[@ahaatrumpet]

Fantastic, life saver 👍

[@OutdiroadtvStars]

thank you for this please give more videos on this type scooter

[@paulclutton2056]

Helped me out big time 👍

[@KhayroDIn96]

Thanks man u r the best

[@DrLove911]

Great video thanks 😁👍🏻

[@ufukdagustu164]

Superb video , Thanks

[@ANACONDA_2000]

fantastic.U saved my ass :) thank u very much for this very helpful video

[@MarioTorres-vu4cc]

Danke, ich kann keine Englisch aber ich habe es gut verstehen können, was du meintest.

[@mladvance-yt1014]

Good explaination THANK YOU

[@WhoWhereTheBee]

Thanks for sharing! Super helpful stuff.

[@kevinstearns4198]

i took apart my kick starter assembly and the marks didnt line up. but still worked? im doing it ur way.

[@johnnysammygidharry9949]

Thanks for a good tutorial

[@derscooterschrauber7886]

Hallo ..Dein Video hat mir weiter geholfen.. Danke einen Daumen hoch lasse ich da...lg Peter

[@emregezen3101]

Just perfect. Thank you alot bro.

[@A.Hisham86]

Very helpful! thanks! :)

[@paynecm01]

Good video man. Thanks for taking the time to do good work an showing it.

[@MrKnecht86]

BIG Thx from Germany :)

[@garygrinkevich6971]

interresting I think my kickstart assembly is different than this mine has the assembly on the side you remove process looks the same though.

[@justscooters9821]

Great video!

[@marioramirez5478]

Thx man really well explain