34mm Polini PWK Flat Slide Carburetor Install & Modifying A Stage6 Bellmouth To Fit : RC1 : Part 18

[@ville1453]

If you replace std subframe to Stage6 or similar, you get more options to mount carb. I think it will improve handling and will reduce bouncing of the rear end also. Keep up the good work!

[@tormarhighhlands4599]

Good job mate,I love to watching your experiments 😃

[@user-dt3kf9nu5u]

Just ordered a Polini 28mm PWK carburetor with 118 MAINJETinstalled, stage 6 PWK/CP MAIN JET KITS 100-122; and 125-148, Stage 6 Racing MKII 70CC 10mm gudgeon pin Minarelli Horizontal AC cylinder kit for my SMC REXY 50 moped......all from Distribution Scooter Tuning in Canada

[@robertpierce1981]

I shall wait right here until next installment

[@X7rocks]

So far my buddy who got an rc one that was tuned by a German company uses a 34mm carb. So far he's easily hitting the 90 mph mark. But it could also be due to the tuning from the german tuning company. It's stupid fast.

[@49ccscoot]

It's not MT Tuning is it?

[@X7rocks]

@@49ccscoot I'd have to check. It is Burkes bike that I had the motor sent from Germany for his piaggio typhoon. We've had hk engines and mt. But I'll double check.

[@matthewnorris203]

Keep going with the beard, it looks good on you. ScooterTuning does ship really fast, it’s crazy, especially them being from Canada.

[@paulbudford]

So far so good. 👍

[@kornelmag6943]

I really like your leds at the background! And you motivate me to do some work with my scooter, even if it’s cold and wet outside (check weather in Brodnica in Poland). I have to assemble my Piaggio NRG because at 25 November my technical inspection ends :P Waiting for testing! 😊

[@GorrillaFastTv]

Polini is a great carb I run the same one

[@bravo1412]

Dellorto vhsb 34 for power or even a 39-44 but thats for 125cc+! PWK even the polini opimizt one are a trade of! all brads have a name to make high qualitiy parts! but on a 2 stoke the carbe is the thing your brand name can do bad on! Malossi goes the eazy way, a well known 28mm cab with a lot of fallsave. A round slaider maks the carb more youser frendly. Special on half to max open. The aera over the mainjet is large! so you have alot off Venturi efekt working for you! so you are alway on the rich side when you close the trottle.Thats wen you close the thottel full and than go full thottle, the enginen needs a bit of time to rev up and make the power on the scooter. The PWK seris is a half flatt slider. its in between a eazy tune carb and a full power carb. the VHSB Series is a flat slider carb, designt for the 2 stoke moto GP 125/250/500cc in the lade 1980 (>1985) and optimizt in the 1990( 1994-1998 peak power). this carbs are a night maer to tune perfect! i know alot of engines that made way mot power with the VHSB than the PWK! 2fast100cc the vhsb34 made a 36hp! the pwk 31 biddalot vhbs made 34hp! the pwk 29.5 malossi 96 core 31hp. the pwk 28

[@zanderhansen9472]

Looks amazin, always a pleasure to follow what you're doing, love all the maching and extra details you're doing, have you ever had a though about changing your subframe to something stiffer? Maybe a fixed subframe to release the bouncyness on the subframe

[@49ccscoot]

Stiffer would be good, but I don't want solid because of vibration since it's not a race scoot. Don't really know what's out there that still uses bushings. I definitely need to do something if I want it to launch, but suspension isn't really my thing.

[@joshuaharrison9331]

stop guessing & get engmod2T - It'll show you which sized venturi is optimal.

[@user-dt3kf9nu5u]

Scooter tuning is where I order parts also but I pay for UPS shipping to Hawaii. It's not free.

[@kadiryalcin7460]

When wil the result vid come online

[@49ccscoot]

I hope it won't be too long, but it'll be at least a week or two before more carb stuff is posted. I had carpal tunnel surgery just before Christmas and then tested positive for COVID on NYE. I don't like doing vids when I can't talk well and I've still got to record all of that and then edit.

[@kadiryalcin7460]

@@49ccscootthats fine bro. Am stil waitint :-)😅

[@49ccscoot]

@@kadiryalcin7460 I've been slower than I thought. Got rebound COVID. I've had no energy, can't sleep, and struggle to want to do anything. I am working on the first of the updates now though.

[@jeffkrauss5582]

With pwk carbs I’ve always found they need an odd ball main jet

[@kolten808]

😮 that uh bigger carb there should uh breath new life to that cylinder lol🍿 😁🍻

[@mcariffadil6600]

What are the size of the holes in the pwk 28, can you tell me?

[@jeffkrauss5582]

Have you tried using micro drill bits for adjusting your jets

[@49ccscoot]

I have. I find it easier to have a full selection and use bits if necessary beyond that or for size checks/comparison.

[@Rexxy_90]

I always need to drill the channel for the fuel so it can flow enough to the float. I had several PWKs where it didn't flow enough and died after a while at full throttle. Even if it flows well from the gas tank!

[@Dariush27]

Out here we call the PWK's D-Sliders because of their D shape

[@Craigyingermany]

Thanks for the video. What background music was playing during the set up part (approx' 4 minutes)?

[@49ccscoot]

Not sure. KZbin is supposed to auto-credit songs from their Audio Library in the description now so I quit writing them in the description when I upload. I don't see whatever that one is in there though, so maybe they don't add everything. It's definitely from the KZbin Audio Library, but I don't know beyond that right now.

[@Craigyingermany]

OK thanks@@49ccscoot

[@PedroRodriguez-hy5ty]

Will this carburetor fit a Honda pcx 175 cc scooter let me know thanks

[@devanandseedan9687]

Good night Brent how are u....I have a question as u know I have a yamaha jog upgraded to 70cc I got a scrap bike to buy yamaha jog z with disk front brake......is it advisable to change over the fork and replace my drum brake with the dis brake

[@49ccscoot]

The disc brakes definitely stop better and have a better feel IMO.

[@devanandseedan9687]

@@49ccscoot thanks

[@lukeriley2721]

my rc-1 is so loud, do you have any recommendations to quiet it down?

[@49ccscoot]

A couple. Malossi's silencers use pretty small holes in the baffle. The silencer could be modified or replaced. I have replaced one of the MHR silencers with a Yasuni silencer on my TRP 86cc and that quieted it down a bit. That's shown in the link below. Diameters are a little different on the RC-1 pipe, but we fit one to Ryan's RC-1 with a similar setup. kzbin.info/www/bejne/ranKiYSgh96Unrssi=SFM751l0Yx8ureDL&t=1784 The other big source of noise is the pod filter. I haven't tried them yet, but maybe check out Polini Thor airboxes. An airbox and the right silencer should quiet it significantly. This is something that I've really wanted to do as well, but just haven't got around to it yet.

[@uwu3130]

cool :3

[@Tahterimonni]

Is there any way to contact you for tips on this build i find few key points how you can reach MUCH more power 5-6sec 0-60 is easy to reach

[@49ccscoot]

I'm thinking you're the person that contacted me on the forum already, but if not that's easy enough to do or my contact info is on my site. I would say to remember I'm a big guy and 300 pounds. We're talking 550 pounds or so of scooter and rider, high center of gravity and can't be launched wide open. I'm not usually 100% in the throttle till 20-30MPH.

[@Saucethe1]

🔥🔥🔥

[@GirolamoGas]

Проще было самостоятельно изготовить из болванки, чем подгонять деталь)))

[@vuvanhai1466]

Hi , can you show me about the piston gap with cylinder by experience - by shaking it inside cylinder. ( my scooter is scarabeo 502t ) . Hope to hearing you

[@49ccscoot]

If you're judging piston to cylinder clearance by wiggling it in the cylinder, you're doing it wrong. There's no way you are going to be accurate like that. I show proper piston to cylinder clearance checks in great detail here : kzbin.info/www/bejne/hJvMe2yJn8iXesUsi=q9-Txo-l0Ym9drx1

[@vuvanhai1466]

@@49ccscoot thank you so much !

[@mohdjemadil4527]

My suggestion... Dont tilt the pwk carb like that long term you're going to have a problem... Thrust me im also using pwk(with powerjets)

[@Scissors69]

Won't it just have problems straight away? What will the long term do?

[@seanmayo206]

I don't have a clue. Wanba talk building with wood im on it but i bought a 2022 icebear an took off all restrictions. I need help Pls help me. Theres nobody around here that works on um

[@49ccscoot]

What's the problem?

[@Juandelacruz-lx8qc]

Hope that you will consider using mikuni 28 flat or tmjn yoshimura 26 on ur rc1…👍

[@MrSandRune]

150km\h???And it takes 2 second.Much better than car,super-car,fly.

[@حسينقرهمحمد-ي5ب]

في اي دوله يوجد بيعه

[@49ccscoot]

I bought it from Canada.

[@حسينقرهمحمد-ي5ب]

Thanks for the reply bro, how much does it cost?

[@حسينقرهمحمد-ي5ب]

I have a Yamaha Rex 135 bike with a carburetor. Does it increase the speed several times, brother? Please reply.

[@49ccscoot]

@@حسينقرهمحمد-ي5ب Go to ScooterTuning.Ca to see the current price. The 34mm seemed to help with acceleration vs the 28mm oval slide, but the 28mm didn't eat any pistons.

[@حسينقرهمحمد-ي5ب]

@@49ccscoot My brother, I want to know what is useful and suitable for the Yamaha 135 bike, which of the sizes. Thank you for the response, my brother.