4a - Eliminating clutch (pedal) fork squeak

[@TheWrenchWiz]

Follow up to this video -> kzbin.info/www/bejne/iHy1qpSapLeekKM The squeak (to a lesser extent) came back the next day. With the camera out of the way this time, I was able to see better and get more room. Now the squeak is 100% gone. With the slave piston out of the way, push the clutch fork (away from the internal pivot head) and pull it outward. You will get plenty of gap to get grease in-between and I put a good amount. You can move the clip out of the way to create a bit more room. Be very careful when getting the slave cylinder out of the way under hydraulic pressure, release the slave rod slowly. You do not want the piston cup inside the slave cylinder to pop out with the fluid. Do not push the clutch pedal when the slave cylinder is not pushing against the clutch fork. If you have a rattling on idle, sound like a bird chirping, this unintendedly got resolved in part 2 of this series (by refreshing the internals of the clutch slave clylinder) - kzbin.info/www/bejne/laWnhHSqmJKFnKs

[@highvisinnorcal]

The mouse at 35 seconds!

[@TheWrenchWiz]

haha yea

[@mikiex]

That's the apprentice

[@TheWrenchWiz]

LOL

[@2jzgenat]

I think we found the squeak😂

[@1961UK]

How could you miss that mouse 🐭

[@svenaberto6797]

Thank you big time did work for my toyota auris 2009🎉🎉

[@TheWrenchWiz]

Great!

[@syafshof6170]

Thank you very much Very useful and I have successfully installed the rubber May you and your family always be blessed with health, safety and happiness always amin

[@TheWrenchWiz]

Happy it helped, thanks!

[@Snicker60515]

This is great to know! My Fit/Jazz does the same thing. Of course, I'm not going to be doing this fix, because these cars are a pain in the ass to work on. When I get my new master cylinder with the clutch delay valve delete, I'll have my mechanic try and fix that squeaking. Thanks for sharing! And make sure you compensate the shop apprentice accordingly, wouldn't want him to start chewing on any wiring.

[@TheWrenchWiz]

Lol. I really want to try the clutch detele thing as Ive only seen positive reviews. Which clutch master cylinder you getting?

[@Snicker60515]

@@TheWrenchWiz I bought one Seb's garage, a small channel here on KZbin, that he modifies and sells to the public. I believe it's actually an early-2000s Civic one that happens to fit our cars.

[@TheWrenchWiz]

@@Snicker60515 Ah ok. Hope you enjoy it even more once its all set!

[@johnmano1439]

You sure are right when you say that these cars (Jazz/Fit) are a pain to work on!... Working on my 6th gen Civic is a walk in the park, especially when compared to my 1st gen Jazz...

[@williamblair2934]

Nice and thorough. Thank you

[@alvinsingh6033]

I had this issue with my Toyota Hilux and the noise was coming from the slave cylinder itself. The squeaking noise resolved after i slide the rubber boot on that slave cylinder until the thin long shaft was visible and sprayed CRC on the shaft at intervals whilst my son pressed the clutch up and down. This lubricated the shaft in the cylinder and after 5 minutes of spraying the noise was gone..

[@TheWrenchWiz]

I did overhaul the slave cylinder, the contact point for the rod inside is greased. In my case I think because the rubber boot on the fork was ripped, too much dirt got inside and ruined the contact points so thats why its not 100% after greasing.

[@user-mn6pn6il1v]

😂😂I thought the mice was the mechanic

[@muhammadawais581]

I have the same passion to do my car by my self. I can do small and easy maintenance tasks. You are way more professional than our mechanics in the market I wonder how you are so much professional. Have you get some training or course. It's amazing to watch your videos.

[@TheWrenchWiz]

There are lots of materials/videos online. I just read a lot and and try things. I am still learning new things and I enjoy it. If you have a passion, like I do, you do not need any training course. I try to follow what the manufactuer says as they know their cars the best. Invest in good quality tools, have patience and always be safe.

[@muhammadawais581]

@@TheWrenchWiz Thank you so much for your valuable advice. I believe the same always following the manufacturer's guidelines is the optimal way for maintenance. But unfortunately, our workshops believe in judad.

[@lucidgravitationalpull2234]

THANKS FOR BEING SO DEATAILED!

[@TheWrenchWiz]

You're welcome!

[@brandonburnett9288]

🐁: I found the problem boss!

[@joshua_mcclure]

Are you sure the squeak wasn't the mouse?

[@TheWrenchWiz]

Lol. I still have my doubts

[@syafshof6170]

Terimakasih banyak Sangat bermanfaat dan saya telah sukses pasang karet nya Semoga anda dan keluarga selalu di anugerahi kesehatan keselamatan dan bahagia selalu aaaaaaaamiiiiiin

[@antonijo4983]

Mickey mouse 😂