No video

4AGE 20V AW11 MR2, The Poor Man's Ferrari [EP2] - THE SKID FACTORY

  Рет қаралды 182,042

The Skid Factory

The Skid Factory

Күн бұрын

Support us on Patreon: / theskidfactory
Buy merch here: www.theskidfac...
Today on The Skid Factory, Al, Woody & John inspect the 4AGE 20V block and pistons and form a game plan to rebuild the engine.
Woody then visits his mates Andrew & David at ‪@ZeroTo60Tube‬ to get some of the parts vapor blasted to clean them up and make them look brand new!
Checkout ‪@ZeroTo60Tube‬ here!
/ @zeroto60tube
/ zeroto60tube
www.instagram....
If you like what you see then Share it with your friends and don't forget to subscribe and hit the bell for Weekly episodes!
For updates keep your eye on The Skid Factory (TSF) here:
www.instagram....
www.instagram....
/ theskidfactory
www.instagram....
/ theturboyoda
Please note: We like to make interesting car mods and show you how we've gone about it, but we can't promise that anything we show you will work for your particular car, or that you won't harm yourself, someone else, your car or your warranty doing it. Please be safe, be responsible and unless you know what you're doing, do not fool around with very serious machinery just because you've seen us make it look so easy.

Пікірлер: 434
@theskidfactory
@theskidfactory 4 жыл бұрын
Head over to Zero to 60 and give them a Sub! kzbin.info/door/tEQM9eop5tRO-eWN6-AQwQ
@JesusisJesus
@JesusisJesus 4 жыл бұрын
The Skid Factory 5:20 The Engine is dobbing you in “Bought, .bought, ...Bought”
@ArtVandelayOfficial
@ArtVandelayOfficial 4 жыл бұрын
Please consider doing a 7age 1.8
@marklitzow2743
@marklitzow2743 4 жыл бұрын
Definitely do a vid on the test n tune for sure. Keep up great content 👍
@KickMoreAss
@KickMoreAss 4 жыл бұрын
Do NA. MAKE IT SCREAM. There's all ready too many turbo builds on KZbin,and not too many high power NA builds.
@liddz434
@liddz434 4 жыл бұрын
I got so excited when you said you were going to chuck some cams and springs in there! I always think if you're going to do a tear down and freshen up ya might as well pay a little extra and throw in a few goodies!
@yammoSki123
@yammoSki123 4 жыл бұрын
"Google something with ya brain engaged" By far one of the best quotes in the motoring world
@Havana69
@Havana69 4 жыл бұрын
in any world for that matter
@robmanueb.
@robmanueb. 4 жыл бұрын
I can't see Al but heard "his" voice that said they shouldn't use a turbo which leads me to suspect that Al has been kidnapped and been replaced with an impostor. Bring back Al!
@AfferbeckBeats
@AfferbeckBeats 4 жыл бұрын
RoboYoda
@aviatorix8805
@aviatorix8805 4 жыл бұрын
Yeah, they don't call him Natural Aspiration Yoda
@dannyhudson5115
@dannyhudson5115 4 жыл бұрын
No it's just turbo "but not for free" yoda
@k5ren
@k5ren 4 жыл бұрын
Al Lied! Hence the name of his business - Allied Performance!
@juhojalonen3046
@juhojalonen3046 3 жыл бұрын
He didn't wanna touch the MR2, hence NA was the way. :D
@StopDropandLOL
@StopDropandLOL 4 жыл бұрын
I like it when you guys bring John on, great to see an expert show his craft.
@dnick1981
@dnick1981 4 жыл бұрын
Yoda has entered his third and final phase: Wise mentor.
@alexfloresjr.429
@alexfloresjr.429 4 жыл бұрын
Al, Woody, Marty... Salute to all
@guy_autordie
@guy_autordie 4 жыл бұрын
@geheimschriver that's just a bracket. Wrong Yoda here.
@deanrobert8674
@deanrobert8674 4 жыл бұрын
Legend has it that Al has downloaded himself to the net, and now has take over his Doppler ganger. Now Al's every where and nowhere at the same time. Spooky
@PhilJennings
@PhilJennings 4 жыл бұрын
As an experienced vapour blaster (have exactly the same machine) you will need to pull those throttle bodies apart, I guarantee there will be media inside everywhere. Also always best to remove any ferrous parts as they will now rust as you have removed the protective coating.
@sirexwasp
@sirexwasp 4 жыл бұрын
“Non mulleted mans Pontiac Fiero” Classic
@FirstLast-bi8xi
@FirstLast-bi8xi 4 жыл бұрын
Vapor will pack those beads in so tight water will not dislodge them, you need to poke with a wire rod or whatever. Taping the casting with a hammer will help too. I did mine on a stainless bench top, and freaked out how much comes out...and keeps coming out. After about 7 cleans i felt about 90% confident.
@ArkaynAdrian
@ArkaynAdrian 4 жыл бұрын
"Local workshop owner, not a Laundromat" - never gets old.
@figifister
@figifister 4 жыл бұрын
I'm all for N/A Screaming goodness
@nammmy1
@nammmy1 4 жыл бұрын
As i work on cylinder heads and glass beed sand blaster every day i would definitely be pulling that throttle body apart. Glass beed is bad news if it gets in the engine
@PiDsPagePrototypes
@PiDsPagePrototypes 4 жыл бұрын
If no boost, make it rev. Beyond S2000 revs.... Al's 'Google with ya brain switched on' is priceless advice for Every topic.
@thins1378
@thins1378 4 жыл бұрын
Can't beat an Al's narration
@DirceuCorsetti
@DirceuCorsetti 4 жыл бұрын
I've seen vapour blasting on motorcycle parts and it just looks awesome. I hope woody gives that engine bay some cleaning and painting to make those parts pop. That car has such cool lines, I wish we had them here in Brazil.
@Wilbure
@Wilbure 4 жыл бұрын
man seeing the parts getting cleaned in the dishwasher and the vapour blaster soothes my soul. also big ups for John and "howyagoin", one of my favourite phrases that.
@ashporter1980
@ashporter1980 4 жыл бұрын
YAY FOR JOHN! I also think this build should be called "Woody can do that" Because that seems to be what Al is saying for all jobs.
@joonatankahkonen1667
@joonatankahkonen1667 4 жыл бұрын
The level of your detail and measuring to an old toyota motor is just insane. The old Japanese Toyota motor company builders are probably bowing to your commitment as we speak. Absolutely thrilling to watch though. Thumbs up.
@TheSergeiFranco
@TheSergeiFranco 4 жыл бұрын
Watch out for oil pump casting of the TDC mark, there is difference between ST and BT. The sprocket is different between each.
@mattsnyder4754
@mattsnyder4754 4 жыл бұрын
“I say send it, but if I ruin a motor...” I know that feeling.
@555_Kochi_STi
@555_Kochi_STi 4 жыл бұрын
I think Woody saw some vapor blasting action on Project Binky.
@nukedathlonman
@nukedathlonman 4 жыл бұрын
Wow, I'm really impressed with the vapor blasting - the finish is awesome!!
@joealex65
@joealex65 4 жыл бұрын
I really love that Al is now narating the videos, i hope you keep it for the whole MR2 series! 😂😂
@elitecol69
@elitecol69 4 жыл бұрын
It's because woody is leaving soon, incase you haven't noticed all the hints through the last few vids
@chewbacca181
@chewbacca181 4 жыл бұрын
Fred Bassett how do you know he is leaving
@dazaspc
@dazaspc 4 жыл бұрын
Dont forget the budget backside of the valve polishing. We always polish the back side mounted in the drill press, lathe or even drill. Just tape up the area where the guide runs.
@LeviHeizer
@LeviHeizer 4 жыл бұрын
You need to play the song "Running in the 90s" while working on a 4age for more hp.
@guy_autordie
@guy_autordie 4 жыл бұрын
Listening to eurobeat while driving gives you a 50hp increase.
@hoost3056
@hoost3056 4 жыл бұрын
Best comment of the day, Bunta would proud👍
@DestroyersGarage
@DestroyersGarage 4 жыл бұрын
johns ute is sweet. cant wait to see it moving.
@fat.chance
@fat.chance 4 жыл бұрын
Zero to 60 is a great channel, well worth a look
@L3g4cyTT
@L3g4cyTT 4 жыл бұрын
I love the Kx 500 in the background, what a machine
@drift1jz
@drift1jz 4 жыл бұрын
Block "sold to guy with the screaming chicken tattoo" 😂 New addition to Johnny's 4A parts collection 👍
@mrgernade
@mrgernade 4 жыл бұрын
Enjoying the build. I've got a silvertop I've been working on for the past year or so, to stuff into an aw11. I fell into the rabbit hole when I found some missing material in the cylinder bore that required an overbore. So if you guys need some pistons, rods, or cam shims, let me know.
@timbr33
@timbr33 4 жыл бұрын
i love the fixed head on the vapour blaster! im going to rig up a holder for my bead blaster like that! closest thing I've done is cable tie the trigger so i don't have to hold it down for hours hahaha
@mrdatsun211
@mrdatsun211 4 жыл бұрын
Absolutely love it guys. These video's just get better and better. Common sense and no bullshit!
@troycrimmin796
@troycrimmin796 4 жыл бұрын
Full force are the go to for suspension on the bikes, andrew was great to deal with when i bought my bike off him and a few months later built my suspension
@38skippers
@38skippers 4 жыл бұрын
Oohhh vapour blast. I could watch it all day.
@youneverknow4707
@youneverknow4707 4 жыл бұрын
I worked at Southside cylinder heads down here in Brisbane for a time. We vapor blasted almost every head that we did. To get the media out I would use the hose in the blasted to get the majority out and then take it to a dunk take where I would dunk it 20-30 times. After that I would run it through the hot wash and blow it off making sure to blow out all the oil channels, bolt holes and water jackets. The water jackets will be the hardest place to get the sand out of as it is cast and the sand likes to stick in the corners, so I would just make sure your really throughout with the air gun getting it right down in there.
@aserta
@aserta 4 жыл бұрын
Even if you get the media stuck in passages after vapor blasting, because it's glass beads as opposed to sand grains, round vs sharp, it's easy to remove with a water hose and an aerator. Which essentially means you have to shove air through the water hose before it enters the block (one passage at a time). By doing that, you "shock" almost all the beads off the galleries and lines and you'll be in the green. As with all kinds of blasting with media...the first oil pass is sacrificial (IMHO) and you'd probably want to change it only after a few cycles. Either way, heaps better than sand blasting. As a side note, i heard that there's new media out there that once exposed to a specific lubricant, it melts. Prolly too expensive yet, for us shop gamers, but in the future, who knows.
@marcusl9118
@marcusl9118 4 жыл бұрын
Didn't think I'd like this AW11 series, but now I'm hanging out for next vid. Keen to hear it running!
@aSinisterKiid
@aSinisterKiid 4 жыл бұрын
Great to see John again. It's such an art to measure all those tolerances and it's super cool to see him in action.
@aserta
@aserta 4 жыл бұрын
The original video with the washing machine shaking itself to bits was made by a fellow Aussie of yours, who unfortunately isn't with us anymore. RIP Aussie50.
@azimpetra
@azimpetra 4 жыл бұрын
Hope everyone is playing along with their 4AGE on the bench.
@feral4mr2
@feral4mr2 4 жыл бұрын
Rebuilding one myself at the moment too. 😀
@Cliffo-me8wn
@Cliffo-me8wn 4 жыл бұрын
Al n Woody, Woody n Al, thanks for getting us through this, cheers.....
@siegel197866
@siegel197866 4 жыл бұрын
Everything is coming up Milhouse!
@ryantilley-general.shenanigans
@ryantilley-general.shenanigans 4 жыл бұрын
I'm loving this roll reversal guys! It's awesome to see how far everyone has come on this whole You Tube thing. I've just finished rewatching the MCM MX5 turbo build, and I'm half way through the Super Gramps build back at the AM auto shop and to see Al go from quiet infront of the camera to being the camera guy doing the voice overs is very cool and Woody going from being behind the camera to this is great stuff. Love it!
@fendel_
@fendel_ 4 жыл бұрын
The days with new Skid factory videos are my favourite days!
@SigmAnalog
@SigmAnalog 4 жыл бұрын
To my knowledge, the 4A-GZE's internals are basically identical to the standard 16-valve "Bluetop" 4A-GE. The Roots chargers they used on those engines were pretty small, and the engines themselves were, in classic Toyota style, relatively overbuilt, so the innards weren't under that much more stress than they were on an NA engine. All 4A-GEs have identical blocks, though, so mixing and matching is entirely kosher! Side note, _dear god that throttle body._ ITBs on a 4A-GE are already a match made in heaven, but after vapor-blasting...man alive, that's some sexy, sexy shine. _I want this car so bad._
@feral4mr2
@feral4mr2 4 жыл бұрын
The 3 rib 'bluetop' bigport 4age is nowhere the same as a 4agze. It came with a 3 rib block vs 7 rib. 40mm big ends vs 42mm and 18mm little end vs 20mm. The later 7 rib 'red and black top' bigport 4age and 4agze are exactly bar the pistons and a knock sensor on the 4agze. The 7 rib smallport 4age and 4agze are exactly the same bar the pistons, these also came with oil squirters that the earlier 7 rib blocks didn't have. They also had a breather from the rear of the head to the block/crankcase, also works as a oil drain back. The 20v silvertop and blacktop blocks are very slightly different to the smallport ones, they didn't have the head to block breather.
@Skater3z3b
@Skater3z3b 4 жыл бұрын
Good stuff guys! Can't wait to hear those throttles sing!
@thereal2scummy636
@thereal2scummy636 4 жыл бұрын
The loose bolts is a bit of a thing with 20v that have had the limiter raised especially the cam caps need to be kept an eye on if it's seeing 9k or more regularly, Also definitely splash out on new oil pump n keep to thicker oil they like to eat vvt gears if u gt to fancy with the oil
@andyoram5815
@andyoram5815 4 жыл бұрын
Balancing the crank ? You boys brighten up the UK ! Keep doing what you’re doing ✌️👍🇬🇧🍻
@steveveness3829
@steveveness3829 4 жыл бұрын
G'day from West Australia, Guy's 😉 Love the trip down memory lane. Nothing like 4 throttle body's singing a song behind one's head. Somehow a feeling of being one with the car. An interconnectedness of what to expect from car manners, or lack thereof if it's an animal😉🙂👍👍
@StratoJohn
@StratoJohn 4 жыл бұрын
Great episode! Good to see a mixture of Al and Woody in front of the camera, and also good to see input from John and zeroto60
@paddy2661
@paddy2661 4 жыл бұрын
Another beaut video fella. Wicked ute too John . All info is straight to the point and love the humour . Yeah let the tubes sing great call with the cams also
@ianfairbanks1318
@ianfairbanks1318 4 жыл бұрын
Super cool JDM stuff, Y0! I know Al hates em, but this is what i love and when i watch.
@LittlePixelTM
@LittlePixelTM 4 жыл бұрын
AW11s are my absolute favourite so I'm so glad to see you guys doing this project - when MCM hinted about their MR2 I was excited until I found it it was a MkII. This thing is going to be sweet - kudos!
@bleeksbentbits3150
@bleeksbentbits3150 4 жыл бұрын
Thought I needed glasses too Al, until I realized it was my arms getting shorter... This can be double checked by the fact the ground is getting harder to reach when bending down to scrabble things Ive dropped
@christianbuczko1481
@christianbuczko1481 4 жыл бұрын
The best thing about that car is its not made by fiat. I had a fiat once. It was a literal death trap. Brakes failed once, tyres were 135 wide, and not big enough for a push bike, it had bad lift off oversteer, the body had several holes over a foot long filled with a few inches of filler, the radio wasnt attached to the dash board. Infact they came without a dash from factory, it had a missing fuel cap too. I rolled it on a corner which had oil on it and it just started raining so was like an ice rink. The BMW in front went round ar 60+mph on a british country road. I slowed to 40mph, and the car understeered, then oversteered 90degrees and drove up the inside corner hedge at about 10mph because it was hardly moving. The fuel tank emptied straight into the car interior pooling on the upside down roof, the radio, still working missed my head by an inch and landed in the pooling petrol. The radio carried on playing while i got out the car, having to force the door open which had crushed itself under the cars weight. Basically, i have no idea how i didnt get blown up, crushed or worse...
@clubsport9334
@clubsport9334 4 жыл бұрын
Been subbed to 0-60 for a while now. Their new salvage Supercharged M5 series is well worth the watch!
@ZeroTo60Tube
@ZeroTo60Tube 4 жыл бұрын
Thanks man! We are moving sheds at the mo, so haven't had a chance to film any more on it since that last vid. Hopefully get some time again in the next few days and the vids will start flowing again!
@AntKardano
@AntKardano 4 жыл бұрын
Love the budget approach on this build. Seems attainable somewhat.
@mattsmally747
@mattsmally747 4 жыл бұрын
2 handshakes with the vapour blast bloke at the end there, very Aussie
@SirDaffyD
@SirDaffyD 4 жыл бұрын
Bolt the supercharger from a 4AGZE onto the motor and make lots off cool supercharger noises. Sounded cool in my mates EA86 Sprinter when he replaced the old 4AG motor with a 4AGZE, and it went like stink!
@mattsnyder4754
@mattsnyder4754 4 жыл бұрын
John’s drag car is sweet. You can tell that’s the most precisely assembled car on the planet just by looking at it
@nickslayer4368
@nickslayer4368 4 жыл бұрын
Now I need a vapour blaster.... Damn those parts look brand new again!
@nickslayer4368
@nickslayer4368 4 жыл бұрын
@CurlyG65 awesome I'll have to start investigating
@tangybuttfrogfpv8772
@tangybuttfrogfpv8772 4 жыл бұрын
You guys have inspired me to start a project car, got myself a clean zl fairlane and a barra conversion to play with. Thanks woody and al
@NickyP500
@NickyP500 4 жыл бұрын
After I vapour blasted a cylinder head it had some ally welding done, this heated the whole thing up and released even more blast media! Even after what I thought was over the top cleaning. The heat must have evaporated the moisture out.
@mikedixon1299
@mikedixon1299 4 жыл бұрын
I do a lot of 20v motors here in Cape Town with good results the cams I use are the CAT cams 293deg with 9mm lift they work with std springs and the Vvt still works on average with a ported head and those cams you can expect around 135kw
@TomarenaiEraserRain
@TomarenaiEraserRain 4 жыл бұрын
Wow that vapour blaster is beast mode
@colinsmith2423
@colinsmith2423 4 жыл бұрын
You guys should get in touch with Manon Racing out of NZ. 4a-ge guru, tons of great performance parts you cant get anywhere else. Guys got a legendary ae92 Levin as well.
@feral4mr2
@feral4mr2 4 жыл бұрын
They deffinately has a whole pile of tired and tested performance parts. I look forward to the day i can afford to click on the order now button from their store!
@bwsgarage
@bwsgarage 4 жыл бұрын
Keep the great content coming!
@timsaveneh567
@timsaveneh567 4 жыл бұрын
One of your best eps I reckon. Love the different locations. Really love whrn John is on the show, something cool about watching a very calm expert. Felt like a bit of a journey, really liked this one and loving the build.
@finlay230
@finlay230 4 жыл бұрын
love the project woody !!!! MK1 MR2 are cool as !!!
@Magnero
@Magnero 4 жыл бұрын
I noticed the simponss flag a about the 12 minute mark. OMG that is so awesome lol
@Paulman50
@Paulman50 4 жыл бұрын
Love this channel, bit of knowledge, bit of shit, bit of funny, bit of giving shit about people that don't know what their talking about (that's me, that's why I'm here).
@brownsworthy7323
@brownsworthy7323 4 жыл бұрын
Yep, silver top rods were larger the black top was lightened up to help it's high revving nature.
@Yelociti
@Yelociti 4 жыл бұрын
I think the throttle body being a restriction is a myth We even use them on Blacktop Beams. Blacktop 20vs also have a higher comp than the silvertop
@theskidfactory
@theskidfactory 4 жыл бұрын
Yes I thought it seemed unlikely too being a 45mm unchoked throttle.
@Athfos
@Athfos 4 жыл бұрын
All the Australia Post Letter Flutes in the bike shop. 😂😂
@chrisrnz
@chrisrnz 4 жыл бұрын
Woody: "I'm a little bit weary doing this." Also Woody: "Whatever, send it." But seriously, this is some top quality tech content. Even people that know nothing (like me) can enjoy it. Good job.
@dannyhicking
@dannyhicking 4 жыл бұрын
I am in the same boat as Al, I am probably at the point where I need reading glasses, but not enough that I have been to the "glasses shop" yet ;-)
@freakysteve140281
@freakysteve140281 4 жыл бұрын
Just need to do it. I didn’t realise how bad my eyes were till I got them checked and got reading glasses. Changes your life.
@oldage001
@oldage001 4 жыл бұрын
@@freakysteve140281 100% this. Getting glasses was like going from a 480p to 4k screen
@tomwagemans1872
@tomwagemans1872 4 жыл бұрын
Since I bought my glasses my tig welds are so much better. Didn't realize how bad my eyes were.
@Paulman50
@Paulman50 4 жыл бұрын
@@tomwagemans1872 ditto
@gabbosadventures9288
@gabbosadventures9288 4 жыл бұрын
Yep, even the cheap ones from the chemist are ok, no visit to the "glasses shop" required lol
@somegi9
@somegi9 4 жыл бұрын
good motivation for rebuilding my 16v smallport for my ke70 thats been taking up space in my dads garage for 2 years. gonna be stoked if it even turns over at this point
@leroydonnelly2909
@leroydonnelly2909 4 жыл бұрын
Awesome work. I clean my old Stromberg carbs with the water blaster, they come up new.
@JesseValentine
@JesseValentine 4 жыл бұрын
Yep Al, Yamaha was the master of the 5 valve. They discovered that above 6 valves per cylinder actually decreased power.
@pce0513
@pce0513 4 жыл бұрын
Johnny bought the block by the sounds of it 😁
@matutolaYT
@matutolaYT 4 жыл бұрын
This MR2 is also the car of another youtuber "driving 4 answers", I think you might want to get in touch since you share a lot of the same interests, and like you two guys, he appears to be a nice guy as well
@FREQQLES
@FREQQLES 4 жыл бұрын
John's man cave has better acoustics than 99% of popular youtubers.
@malcolmjcullen
@malcolmjcullen 4 жыл бұрын
It's quarter to 3 in the morning, just about to finally go to bed, when I get a notification... Looks like I'll be up for half an hour yet!
@HiggyRSQ
@HiggyRSQ 4 жыл бұрын
Yoda" if you don't know what you are doing, talk to someone that does". Woody " I'm just going to wing it"
@TheKaptainKernow
@TheKaptainKernow 4 жыл бұрын
Watching this in England, I can hear the collective French groan from over the channel every time Woody says "Wah-lah". Perfect!
@Brock_Landers
@Brock_Landers 4 жыл бұрын
Dammit boy! I need a vapor blaster!
@brownsworthy7323
@brownsworthy7323 4 жыл бұрын
Yes, it's a Yamaha design
@martinultimatevw3779
@martinultimatevw3779 4 жыл бұрын
20vt head looks also veryyy similar
@theairstig9164
@theairstig9164 4 жыл бұрын
@nugget garage mentioned something like "スキッドファクトリー" now you have been immortalised. I feel this would be a good script to put as a replacement for the regular Skid Factory logo on merch. Might even sell a few in Japan. I would definitely buy a hoodie
@xozindustries7451
@xozindustries7451 4 жыл бұрын
You guys are so funny when you’re working on your own stuff, so serious when working in other peoples stuff! Great work, no reason to make over 400 horsepower because you can’t use that much power anyways.
@seinfeld11123
@seinfeld11123 4 жыл бұрын
make sure you use the oil pump and tension-er and belts from the blacktop. they are 1 tooth less, however the blacktop uses a hydraulic tensioner which can be swapped to the silver top but everything from oil pump etc needs changing as the hydraulic one is notoriously unreliable black top has wider gaps in the buckets/valves to allow better oiling
@travisellis7432
@travisellis7432 4 жыл бұрын
I'm currently pulling apart 3 holden 186 engines, to make 1 out of the 3
@steveveness3829
@steveveness3829 4 жыл бұрын
Hope you are lucky to find a billet steel crank coz you definately can get them to sing all the way to nine grand. With lots of time and a file for zero balance. If not well 7 grand is easy enough😉🙂👍👍
@leroydonnelly2909
@leroydonnelly2909 4 жыл бұрын
Nice, I'm currently pulling apart 4 Holden grey motors to make 1 good 1 for my FJ panelvan 😝
@Paulman50
@Paulman50 4 жыл бұрын
If you pull 3 engines apart and get 3 times the hp, dose that mean you get 4 times the hp, if you build an engine from 4 engines.
@travisellis7432
@travisellis7432 4 жыл бұрын
@@steveveness3829 I have 2 steel cranks. Both came out of 186s engines.
@stuartdead
@stuartdead 4 жыл бұрын
Well, I know which guy I'd rather deal with. Great vid guys.
@dan_2846
@dan_2846 4 жыл бұрын
Andrew literally reminds me of Andrew Hawkins from Motive haha He seems really well spoken to the camera and sorta looks similar lol
@neaptidevlog3732
@neaptidevlog3732 4 жыл бұрын
Love this channel. All done from the home sheds
@TomBudin
@TomBudin 4 жыл бұрын
shaved woody is lookin pretty slick
@nielsdebakker3283
@nielsdebakker3283 4 жыл бұрын
Soot grinding/cleaning without a mask. And then the remark about his "stash", brutal.
@garethplaysdrums
@garethplaysdrums 4 жыл бұрын
Great video. The engine parts washer was good. Liked the comment about it walking off down the street 😂👍
@ShedLife
@ShedLife 4 жыл бұрын
Yesss 4age stuff haha. Got 4age info here if you ever need any! 👍 4AGE the world.
@beardbuilds5140
@beardbuilds5140 4 жыл бұрын
It’s only a little get around nugget , leave it N/A and spank it !! Vapour blasting was pretty cool , it would be crazy to vapour blast something and not even have it take the colour off a sticker ! I still want a kingswood shirt , and chance of doing another run of them ?!?
@scottinWV
@scottinWV 4 жыл бұрын
LOL! Made me think of the video of the clothes dryer the guy puts a brick inside. It beats itself to death!
@MrDannyd9
@MrDannyd9 4 жыл бұрын
Have you thought about oil drain-back holes in the pistons, behind the oil scrapers? It works on oil burning Saturns 🤷‍♂️
4AGE 20V AW11 MR2, The Poor Man's Ferrari [EP3] - THE SKID FACTORY
28:16
The Skid Factory
Рет қаралды 158 М.
4AGE 20V AW11 MR2, The Poor Man's Ferrari [EP8] - THE SKID FACTORY
34:16
The Skid Factory
Рет қаралды 164 М.
Алексей Щербаков разнес ВДВшников
00:47
Harley Quinn's revenge plan!!!#Harley Quinn #joker
00:59
Harley Quinn with the Joker
Рет қаралды 21 МЛН
Why Is He Unhappy…?
00:26
Alan Chikin Chow
Рет қаралды 108 МЛН
7 Days Stranded In A Cave
17:59
MrBeast
Рет қаралды 77 МЛН
We bought a rare straight-six engine for £1!
20:41
DRIVETRIBE
Рет қаралды 703 М.
Building BILLET BARRA Engines
23:04
Fullboost
Рет қаралды 101 М.
4AGE 20V AW11 MR2, The Poor Man's Ferrari [EP4] - THE SKID FACTORY
16:54
The Skid Factory
Рет қаралды 144 М.
Unboxing the Hulkosuka’s NEW Powerplant!
23:58
The Skid Factory
Рет қаралды 185 М.
Drilling Holes in $6000 Turbos - THE SKID FACTORY
23:44
The Skid Factory
Рет қаралды 163 М.
Full Build: From Rusted Out 1961 Chevy Impala to Revved Up Red Sled
1:55:16
4AGE 20V AW11 MR2, The Poor Man's Ferrari [EP6] - THE SKID FACTORY
26:42
The Skid Factory
Рет қаралды 159 М.
Алексей Щербаков разнес ВДВшников
00:47