4EFE/5EFE ARP head STUDS EASY Installation

BUY THE PARTS HERE!! campdogs.store...
Installing head studs into a 4efte and 5efe engines, everything you need to know! Please subscribe and leave a comment. thankyou!

[@Camp_Dogs]

Hey thanks for watching, If you missed my video on how to build your own budget ITB intake manifold be sure to click the link below! don't forget to hit that subscribe button kzbin.info/www/bejne/Z5Wni2eYptKYq7s

[@chetronics]

Great instructional, I was considering sorting this out myself, but I ended up just using the arp bolts. 400+hp! That's just insane!

[@Camp_Dogs]

This actual engine is at 385 HP on 28 psi. We will go to 30 which will break that 400 barrier. Engine is still going strong too 😁😁

[@TattooTaffy1]

Excellent how to Matty, passed on to some of my sil mates

[@Camp_Dogs]

thanks taffy!

[@rileypaterson7117]

i love your videos! im getting into builing these engines too and your my main source of knoledge in insipration!!

[@shedworxxx]

Literally got a pen and paper taking notes 📝

[@mickholgate3347]

fantastic vid Matt, can't wait to see this beast go!

[@Camp_Dogs]

cheers mick not long now hopefully!

[@L35inColorado]

Very, very cool -- What a great video!

[@Camp_Dogs]

thanks for watching!

[@toxic4boost902]

Nice bro we need more video and tips bro we love 5efe

[@Camp_Dogs]

lots on my channel bro thanks for watching

[@jacobburns2975]

Blokes a magician

[@gemini3558]

Awesome Matt !!! Excellent how to video mate thanks for sharing !!! 😜👍🇦🇺

[@Camp_Dogs]

no worries! You will be building one soon! :P

[@gemini3558]

Matt Berry yeah mate !!! I have an engine built to get us started with ARP bolts the limiting factor with huge cams and a gtx 3076 , but the next engine and gearbox !!! combo should we hope to set sum records !!! hehe haha 😂 😜👍🇦🇺

[@Camp_Dogs]

@@gemini3558 yeah cool as! ive made 300 wheel HP on the arp BOLTS and haven't pushed it any further yet. so you should be fine. That GTX though is gonna make 500+ easily haha

[@Camp_Dogs]

@@gemini3558 capable of making 500 +HP **

[@gemini3558]

Matt Berry yes Matt 500 hp + easy we are hoping for over 600 +hp mate hehe 😜👍🇦🇺

[@ellistonvaccianna9120]

Love the video alot of information thanks putting the time to make this video respect every time blood.

[@Camp_Dogs]

Cheers mate anytime

[@PP-vs3jd]

Thanks for sharing the knowledge

[@shedworxxx]

Thanks for sharing ❤

[@AderAceituno]

Hola buenas tardes disculpa yo compré ARP de 4age pero veo que la rosca del blok no es igual

[@panoschristodoulou9975]

What head gasket did you use? Blown 2 cometic MLS on 1.8 bar with arp bolts.

[@peterstoyanov7897]

Lookin good man

[@christopherireland4721]

Great watch. Many thanks.

[@shaunsutton3564]

Thanks Matt ❤️

[@roddyglanza2543]

Hey Matt! Awesome vid mate you really help us Starlet lads out with what you do. Just a question about the head studs, is there much need for a re-bore after fitting these ARP studs due to the extra clamping force? Or is it ok to just send it as is. Cheers mate!!

[@Camp_Dogs]

ive recently heard about this on other engines but had done it too many times before on these engines without a problem so i just send it still without worrying.

[@Wolf-zb9qs]

Great vid bro

[@reecemorton9311]

Hey Matt, I’ve got a bit of a strange one for you.. can’t seem to find a solid answer online. Is There Much difference between fte and 4efe piston rings?

[@Camp_Dogs]

I’ve never seen a stock turbo set of rings. Either way I’ve boosted plenty of na engines and the only time I’ve damaged rings is from a poor tune.

[@reecemorton9311]

@@Camp_Dogs Good to know! Thanks Mate

[@ep91v]

Is this video still relevant to the stud kits sold for the 4efte. I know that the block will need drilling ect but are all the other mods nessesery thanks.

[@Camp_Dogs]

There are no stud kits available for the 4efte. ARP only offer head bolts which are a bolt in set. No mods required. Problem is they still dont hold the head down hard enough in my opinion, i still have problems with head lifting

[@nnm9804]

How much power can ARP 4fte bolt handle? At what power should I switch to 4age engine studs?

[@shedworxxx]

He literally answered this question in the video bro. Anything over 250 bhp he recommends the head studs.

[@PP-vs3jd]

Hey Matt, have you ever mixed up the shims in a rebuild? That would make a good video sorting them out.

[@Camp_Dogs]

Hey I definitely have. Had to work out how to measure them and put them back in 😂😂. Good idea though! I've filmed a lot lately but I'll get around to doing that.

[@oudayeramma7210]

Hi matt. What do you advise the cam timing mark on a forged turbo 5efe built? Should the cam timing be on 4e mark or 5e mark?thanks

[@Camp_Dogs]

Hi mate If its the 5e block use the 5e marks

[@oudayeramma7210]

@@Camp_Dogs thanks a lot

[@Timroycampbell]

How much foot pound you give the stock bolt 5/4efe

[@Camp_Dogs]

22nm 44nm +90°

[@Silversups88]

Did the headgasket fits with the 10mm head studs? Or must drill it also?

[@Camp_Dogs]

Mls gaskets are a direct fit, no drilling. Stock gasket, i am not sure

[@Silversups88]

@@Camp_Dogs what mls gasket should i use? My athena with the arp bolts blows up between cyl2 and cyl3

[@Camp_Dogs]

@@Silversups88 sounds like your engine has detonation issues. Cylinder 2 and 3 also run hotter than the other two. Small turbo with big boost can blow the gasket easily, or poor fuel or a combination of both. Ive always used cometic head gaskets and have blown those thw same way as you did until I figured out what was going on.

[@ricardoreid2594]

I want to put a 1300cc head on my 1500cc block can that work

[@johncrow5552]

yes. 1.3 and 1.5 heads are almost identical.

[@lesliechong5991]

Very great instruction of video. My car is 4AFE engine, I was checked on the www.onlinecarparts.co.uk the 4AGE and 4AFE engine the Thread size is M10 and Thread pitch is 1.25 (same Thread size). So I think ARP 4AGE Head Studs 203-4203 should be able to install it, maybe need some modifications for length. @Matt Berry, what is your opinion?

[@Camp_Dogs]

The thread pitch will be the same, I am unsure on the bolt length though. If you can find the measurement for a stock bolt I can tell you how long the studs are :)

[@lesliechong5991]

4AFE and 4AGE bolts are M10x1.25 90x5 + 108x5.

[@Camp_Dogs]

@@lesliechong5991 my arp studs are 108 mm long and 122mm long Those are overall length

[@lesliechong5991]

Great👍 is able to fit it.

[@OperatingPear80]

Fuck yes thank you so much!

[@Camp_Dogs]

haha no worries! what are you building??

[@OperatingPear80]

5efe, just ditched a sc12 to go to a TF035 with a 75 shot on top ;)

[@Camp_Dogs]

@@OperatingPear80 haha that will be cool!!

[@shedworxxx]

Did you ever grind too far into the valve bucket cylinder? Because I have lol 😬😂

[@Camp_Dogs]

lol nope not yet

[@shedworxxx]

@@Camp_Dogs it must of went oval shaped as it was pinching the bucket but I’ve ground and polished it out so it slides freely again. A good 5mm window for the bucket to look out of 😂