4G94 2.0 DOHC Mivec N/A makes more power and hits the Dragstrip!

Today we look at Andrei's 4G94 DOHC Mivec 2.0 N/A
Parts list :
Custom Intake
4G92 Mivec Head
4G94 Block
Subaru injectors 440cc
K20 coil packs
Honda B18C Pistons
Honda B18C 68mm Throttle Body
Adaptronic M1200 ECU
2.5 inch Exhaust
Mivec Gearbox
Tuned by Slick
Pump 93 octane gas
My socials
/ daniel.j.e.. .
/ dpersad2
Turbo and Maxxecu standalone can be purchased through Ultimate Sport Tuning.
www.ultimatespo...
/ ustltdtt
....
For all your oils, fluids etc you can check PRS PERFORMANCE
/ prsperforman. .
....
For TYRE STICKERS, you can contact tyrestickerstt
/ tyrestickerstt
....
For fabrication, you can check out Brandon
/ branz_performan. .
» Send me stuff «
Daniel Persad
6531 NW 87th Ave Ste T-2034
Miami, FL 33178-1624
United States

[@daviddeen12]

In the next episode... Let's see what a 50 shot can do 😂

[@danielpersad5789]

Thats actually coming.....in d future lol

[@spanxsh7638]

No way😂 I saw this vid first, before yours btw, good content

[@danielpersad5789]

Ha ha. Thanks man

[@arttheseven5526]

I looked at another 4g93mivec(1.8) dyno they were able to get almost the same HP(167) but the Torque is around (125+). I was expecting a little more hp on a 4g94(2.0).

[@danielpersad5789]

We have some restrictions in the setup. Currently redoing some stuff so we expect more power soon.

[@jsuazo1988]

This car is running super great!!!!. But i Have my 94Mivec All Motor 209whp & 169wtq in a Lancer 03

[@remy08_46]

Nice build bro. Can i know what timing belt do you use? What code and length?

[@danielpersad5789]

Cant remember the exact belt lol. It would be a standard one, but cant remember which one as it will depend on the pulley you make for the setup

[@neilsonw6174]

Bess video, keep up the good work

[@danielpersad5789]

Aye thanks man!

[@billfrev]

hey brother i have a N/A 4g69 and when the Mivec kicking in at 3200 Rpm i feel big different ...hear a big difference ...... you're car it sounds like no mivec activation ....could be huge power increase

[@danielpersad5789]

Its the way they have the transition setup, its smooth. But where currently doing some work on the setup. Will post a new vid once this is completed

[@LeoNeo-cz9kf]

Bro u have open back to hight rev n low for body...mivec she best power for drag 402 meter..like body to race...n gear box have open from 2 to 4

[@danielpersad5789]

Aite cool

[@alifkm2]

Try to look at the malaysian and indonesian scene on the 4g9 series engine. We ran as fast as 11 sec quarter mile all motor here.

[@danielpersad5789]

What fuel you guys used? we are on pump gas, 93 octane

[@shaquillejemmott1800]

Any links

[@dajokerr___5260]

Can you make a list on what I would need to swap my head on my 4g94 to make Dohc

[@danielpersad5789]

Based on my knowledge, belt, twin cam pulley and bracket that goes to the engine mount. other than that, everything pretty much bolts up.

[@shaquillejemmott1800]

Any details on which intake manifold and pistons he is running

[@danielpersad5789]

It's a custom made intake. I believe its b18c pistons as the size was similar to the 4g94 size

[@rodrigopires8327]

I have a mitsubishi carisma msx which already has a 4g93 1.8 dohc 140hp, it's not mivec, but as it's a model that only came out in europe they did a collab with renault so the gearbox is renault, so I'd like to know which one is the model and in which cars does this gearbox come in, because there are few Mitsubishis that we see with the gearbox facing the right side (if we are looking at the car from the front), I want to swap it for a Japanese gearbox , but I don't know what adaptations I need to make, if anyone knows what gearbox this is and what steps I need to take, please tell me :) it would help a lot

[@danielpersad5789]

Its supposed to be a direct bolt up. You have to find a ck lancer. Even the cs lancer 4g15'/4g18 gearboxes can bolt up to the 4g93 engine

[@darancampbell5505]

Is it a bseries intake you using as well? And wat management?

[@danielpersad5789]

Nah, it's a custom made plenum . Unless u mean the whale penis lol. Yea. Car has a adaptronics standalone ecu

[@jayryia]

Niceeeee! Like I really need to start doing some lil chooks on the old 16 second CB here boy. Lancers passing me. On the 15s note though, once the overall diameter of the tyre factored, then yeah acceleration would have a benefit if the tyre smaller, especially on a NA setup. Some sticky tredwear and mass.

[@danielpersad5789]

It's time for u to try yes lol. As for the 15s, we got alot of wheelspin, as it's 2.0, it's alot of tq down low. So thats why we opted for the 17s. With proper slicks, 15s would work out better yea. Glad we were able to test them

[@jayryia]

​@Daniel Persad Correct. That's why I mention the sticky treadwear for 15s. I Think with the 15s he can launch a slightly lower RPM (4-4.5K) and keep part throttle. Or even as wheelspin starts, short shift 2nd and go. But for sure a lighter launch will give a nicer move off

[@danielpersad5789]

@Jayryia yea for sure. U would think he was launching high, that was around 2500rpm max eh lol. 2.0 with alot of low down tq to deal with. Any lower and he basically roll off . But probably feathering the throttle can help. First time out. So next time with more practice, we should see a better time

[@jackdaniel4977]

Try dial cam shaft it will makes more power

[@danielpersad5789]

Intake or exhaust? I'll pass on the info

[@4G18SOHC]

May just shift power band, but It's worth a try!

[@danielpersad5789]

@4G18SOHC well it's how much he wants to rev as well. Those rods are tiny lol

[@mivecmanchannel]

Lots of wheel spin, better change to better slicks tyre for drag

[@danielpersad5789]

@Mivec Man Channel in time yea. This was street tyres 180tw. Worked with what we had at the time

[@carloskrieck487]

It’s easy swap 4G92 to 4G94 on lancer ck4?

[@danielpersad5789]

its pretty straightforward, using back some ck mounts etc

[@cecilschelborn5668]

Can u tell the name of the pods and the price pls

[@danielpersad5789]

Owner said it was custom built. Can't remember the cost as it was a long time ago

[@KreepaEvoX]

Mileage is acceptable but it can do a lot better. You should make a little more power with that setup. More revs maybe. Rods look frail on the G94 but they can take good punishment

[@KreepaEvoX]

kzbin.info/www/bejne/iHKoe6R5etCIeNUsi=3uMpovjAqj70lWYZ that's a long gear, no lsd, untuned car revving to 6,900 rpm

[@KreepaEvoX]

kzbin.info/www/bejne/mKOwp6WqmrKDbJIsi=Cm8T914OXtSrCr4L This is my friend banging the limiter at 7,800 because he sucked in that run, lol. It can take it no problem

[@danielpersad5789]

Yea man. still have so more work an tuning to do.

[@beethao5578]

Bro where you get your dash gauge pods

[@danielpersad5789]

That was a custom made gauge pod

[@legistermusic7342]

One a want but the single cam version my aim is to be the fastest single cam in jamaica ...

[@danielpersad5789]

Very nice! Single cam can make a lot of power yea

[@legistermusic7342]

@@danielpersad5789 blessings g

[@joelsantana53]

Shaved the head at least .080 and some cams and and you will be over 200.

[@danielpersad5789]

I will pass on the info to the owner. Thanks man

[@generalmanager644]

That shit slow . Cant beat nothing Remove the honda pistons its running like one .😅😅😅 I've seen 1.8 sohc in Puerto Rico n/a hit 260 to 280 .something ain't right with that combination. Or tuning

[@danielpersad5789]

What u didn't mention is the type of fuel the guys in Puerto Rico using. This is tuned on pump gas, not any type of race gas.

[@generalmanager644]

So do you know how much power a mirage cyborg produces? 175 hp and its a 1.6 liter you got a 2.0 dohc mivec it's supposed to be at least 230 to 250 .do the math .am telling you something ain't right

[@danielpersad5789]

@generalmanager644 175bhp. You're confusing bhp and whp. Fuel also plays a big part of it. But the car still has some upgrades to do, and more tuning to go. But u don't just easily make power n/a

[@generalmanager644]

@danielpersad5789 well we have a dyno .and I know what am telling you .that car ain't right .suppose to be over 200hp

[@danielpersad5789]

@@generalmanager644 yup