430+WHP Turbocharged 4G69 SOHC MIVEC

[@EK4_SiR]

This is one car you'll always see innocently cruising on the highway and not know what it's been up to lol.

[@danielpersad5789]

Thats how it should be lol

[@red0357]

Dan you are so correct......Lancer4Life

[@danielpersad5789]

@@red0357 as the saying goes, lancer is the answer lol

[@brandonwhite6334]

Well it's a daily driver.

[@nathanr.6542]

Realtalk

[@Sero12245]

Shout out to Brandon, very cool build. I love that you used k24 pistons. I had no idea you could use those in the 4g69.

[@danielpersad5789]

The wonders of internet lol. But yes, very nice build for sure!

[@isaiahritter4489]

@@danielpersad5789 how can I get in contact with you

[@ultimatesporttuning1355]

We have a lot of respect for this guy... hands down...

[@danielpersad5789]

Same here!

[@brandonwhite6334]

Thanks much appreciated.

[@MariTheMenace]

430 wheel now pass me on the highway like a regular street car yes. Keep it Lowkey. Keep it Stock🔥

[@danielpersad5789]

That is d way lol

[@brandonwhite6334]

But it is a regular street car .

[@MariTheMenace]

@@brandonwhite6334 sure bro, lemme chill in my corner with my lil 105

[@danielpersad5789]

Lol

[@cecilschelborn5668]

Finally someone do a fully video on ck

[@danielpersad5789]

Yall asked and I gave lol

[@m3e642]

Nice! got a coupe as my first car. Not in a great condition but it will for sure be fun restoring it :)

[@danielpersad5789]

Yea for sure. They are fun cars for sure!

[@Sero12245]

Sick build, that turbo is bigger than my head lol.

[@danielpersad5789]

Ha ha yea. Can't wait to see her run again

[@らいどん-o8q]

日本だとこの型式のランサーを改造する人はほとんど居ないのでとても新鮮な気分です

[@danielpersad5789]

For sure!

[@KerryDrift]

🔥🔥🔥🔥Alot of stock parts in this boii😂.

[@danielpersad5789]

Stock parts is the way for them lancer men an them lol

[@christianlawrence5216]

Big red....waiting to see more

[@deigima]

This is sick. Respect the dude

[@danielpersad5789]

Yea. Proper machine!

[@CriticalDreamsAnime]

Lovely build

[@danielpersad5789]

For sure

[@amrmegahed4309]

Hi dear Tell me your piston set code Did you find any trouble with small end width in this pistons 4g63 conrod width is 26.40 mm K24 conrod width is 19.80 mm

[@danielpersad5789]

I'll contact the owner and get that information for u and respond soon

[@amrmegahed4309]

@Daniel Persad Ok I hope not forget

[@danielpersad5789]

@amrmegahed4309 hey, he is not sure. All the work was done by the machine shop unfortunately

[@JorgeGonzalez-ew1oz]

Hermoso bro tengo uno igual espero pronto iré para dyno 🤗🤜🤛

[@danielpersad5789]

Thanks man!

[@Otownliving]

Nice build

[@danielpersad5789]

Definitely is

[@willis23jm1]

F5m42-2 gearbox?........ 480cc injectors and getting 400hp? .. duty cycle was what percentage? .. what was the 400hp psi@

[@johngray5360]

Yeah I started lifting an eyebrow when I saw the injector size too

[@johngray5360]

Maybe decapped?

[@willis23jm1]

@@johngray5360 oh 🤔kool

[@danielpersad5789]

@@willis23jm1 yea I think its decanted. Injectors definitely needs an upgrade. This was a mixture of pump 95 an some c16. So that helped alot. I think 16psi gave him 400whp

[@brandonwhite6334]

The injectors are decapped but are currently maxxed at 18psi and need upgrading to bigger injectors I am also running water methanol injection which is helping

[@shanemundle3154]

I have a set up like this in Jamaica 🇯🇲

[@danielpersad5789]

Nice! What kinda power your setup does?

[@nicholasram8235]

I wanna bring my lancer by yall to build, how can i get in closer contact

[@danielpersad5789]

You can contact Brandon-310-4162

[@Omar_Punisher]

hi,nice build i have almost the exact recipe but dont know how many mm is the cometic headgasket can you help me with that info

[@danielpersad5789]

1.5mm - 2mm gasket would be good .

[@Omar_Punisher]

@@danielpersad5789 ok my main problem is that the pistons touch the head with this gasket resolve this?

[@red0357]

@daniel I have a simple Mitsubishi CK2 and from the east....can you recommend a good Mitsubishi mechanic....thanks

[@danielpersad5789]

My dad does that. He's in San Juan. U can reach him at 726-1579. Persad

[@Eddie111Garcia-vo7vw]

What year and model ? Whats this car called in canada?

[@danielpersad5789]

This is a 1998 ck2 lancer. Comes with a 1.5L 4g15 engine but we swapped it out for a 2.4L 4g69 engine and turbocharged it.

[@андреймалыгин-щ6ж]

Здравствуйте я вам пишу из России. Скажите пожалуйста какая получилась степени сжатия. Прокладку использовали штатную?

[@danielpersad5789]

Avg compression we think is around 10:1. we used a 4g63 thicker head gasket.

[@zulvlog4286]

Nice car

[@danielpersad5789]

Yea man!

[@cecilschelborn5668]

Can u pls do full video on white sw20 celica

[@danielpersad5789]

I'll have to work on that. I'm not really that good at reviewing lol. My thing is more working on the cars and getting in some racing. But I will work on it

[@a6thomas574]

Nice ride wonder how it would go with awd?

[@danielpersad5789]

It will be quicker for sure. But he's staying fwd.

[@NSPlayer]

@@danielpersad5789 thats not how AWD conversions work.

[@danielpersad5789]

@@NSPlayer the owner said he will stay fwd. Most ppl we know goes awd but he likes the fwd setup

[@willis23jm1]

Awd advantage is quicker off the line.. fwd is way faster once going as less weight n drag. Awd better for cornering.

[@danielpersad5789]

@@willis23jm1 yea for sure

[@biglou36010]

K 24 pistons did you use the pistons rods from the k24 as well? Or you use the 4g69 rods?

[@danielpersad5789]

We used eagle rods for the 4g63. Just the pistons were k24

[@biglou36010]

Yes I'm sorry I had to watch the video again and I heard you said it the 2nd time but thanks for your reply anyway

[@danielpersad5789]

@biglou36010 hey no problem. All questions welcomed!

[@billfrev]

I have a lancer 2.4l 4g69 i wonder if i install my power pully will lose power starring , A/C and cooling .... is this mod worthy for everyday driver ..... does it require a different belt from stock ?

[@danielpersad5789]

I wont recommend no ac for a daily driver lol. And the power gains will be very minimal

[@warendraa]

to swap using 4g69 on a lancer, is the lancer's default gearbox plug and play? What gearbox does the Lancer above use? please answer thank you

[@danielpersad5789]

Hey man. So when going to 4g69. You have to use a 4g69 gearbox or a 4g63 fwd gearbox. The 4g9x or 4g1x boxes won't bolt up.

[@warendraa]

@@danielpersad5789 oh okay, thanks for the information

[@danielpersad5789]

@@warendraa no problem

[@593432223]

What gearbox is being used

[@danielpersad5789]

This is the oem gearbox and we fitted a onx lsd to it

[@593432223]

@@danielpersad5789 is it reasonably available

[@kynanlol]

did you do any modifications to make the 63 headgasket fit?

[@danielpersad5789]

Yea we did. Had to weld off a oil port on the block as the head gasket didnt have a spot for it. Block was carried to the machine shop after to deck the block.

[@brandonwhite6334]

The 4g63 head has a oil drain port where the 4g69 head doesn't so that part of the 63 gasket it slightly out of the 69 head so I welded that port on the block closed then decked the block.

[@darrionsandy9153]

You could get a LSD for any gear box?

[@danielpersad5789]

Not really. What setup you wanna get an lsd for?

[@darrionsandy9153]

@@danielpersad5789 qg18de

[@danielpersad5789]

@@darrionsandy9153 Whats the gearbox code?

[@benmcneely12]

What kind of lsd is that? Im looking for one for my Ralliart lol

[@danielpersad5789]

Lol. It's one we saw on ebay About 450 usd. It works well.

[@jeancharlesrabaux5658]

What is hoseepower the cars please sir

[@danielpersad5789]

The car made 435whp 355tq @18psi

[@jeancharlesrabaux5658]

@@danielpersad5789 houaa soo good bye sir

[@eis-zj4qq]

Would this setup work for a 4g69 with Evo 9 mivec head?

[@danielpersad5789]

Yea it can

[@NightcrawlerNC]

How come this isn’t awd?

[@danielpersad5789]

This is originally a fwd 1.5L ck lancer that we put the 4g69 in. The plan is to stay fwd

[@islandboiilee7749]

What harness was used for the build?

[@danielpersad5789]

He custom made his harness to work with the adaptronic m1200ecu

[@janmuniz955]

What are the specs on the pistons?

[@danielpersad5789]

It's just off the shelf nippon k24 pistons rated for over 500 hp. Bought on ebay

[@janmuniz955]

@@danielpersad5789 I'm planning on rebuilding the engine with those parts. Just bought a ralliart crashed and I'm going to part it out. You got an Instagram account to follow up?

[@danielpersad5789]

@@janmuniz955 this is my friend's car. I will let him comment with his info so you can reach him as he will have all the specifics

[@rosmarcrespo3409]

@@danielpersad5789You need to modify the block to use the k24 pistons? Can u use the k24 pistons with a aftermarket 4g69 rod?

[@spanxsh7638]

Yo dan, how can I get in touch with you?

[@danielpersad5789]

You can get me at 1-868-356-4483

[@azmayozi9490]

What engine management?

[@danielpersad5789]

It's running an Adaptronics M1200 Ecu

[@micocorpuz8948]

Tuning files?

[@danielpersad5789]

What would you like to get?

[@cecilschelborn5668]

Is the gearbox 4g93 or 4g92 or 4

[@danielpersad5789]

It's a 4g69 gbox. Only that or a 4g63 gearbox can work. The 4g9x series gbox has a different bolt up

[@cecilschelborn5668]

@@danielpersad5789 ok. Thks

[@danielpersad5789]

@@cecilschelborn5668 no problem man

[@willis23jm1]

Fwd Eclipse and galant gearbox can wrk also..2005 and above gearbox has better gear ratio than ralliart version.

[@danielpersad5789]

@@willis23jm1 yea true

[@trgcapture]

🔥

[@Mr.Klassik]

Bro how much would it cost to turbo charge a 4g15 DOHC

[@danielpersad5789]

Could be anywhere between 10 to 15k . Depends on if you use new or used parts.

[@Mr.Klassik]

@@danielpersad5789 where u guys located wanna pass n check y’all

[@danielpersad5789]

@@Mr.Klassik we are Piarco side

[@Mr.Klassik]

@@danielpersad5789 go have to link me ur digits

[@danielpersad5789]

@@Mr.Klassik sure. 356-4483

[@nathanr.6542]

430whp nrml nrml on the highway passing me inno😮

[@danielpersad5789]

Yea lol

[@jeancharlesrabaux5658]

Is one Mitsubishi the cars yes ho no sir

[@danielpersad5789]

Mitsubishi ck2

[@jeancharlesrabaux5658]

@@danielpersad5789 kool verie good cars

[@danielpersad5789]

@@jeancharlesrabaux5658 yes they are

[@jeancharlesrabaux5658]

@@danielpersad5789 💪🚗🤠

[@danielpersad5789]

@@jeancharlesrabaux5658 😁

[@rodneymatthews25]

boost by gear

[@danielpersad5789]

Where working on that as well. Going to test boost by speed an boost by gear. Because the spring is an 8psi spring. And it makes 300whp at 8psi, we may look at going with a smaller spring to help with the traction

[@LeBron_James_Trinidad]

Besssssss!!!!

[@danielpersad5789]

Yea man!

[@cecilschelborn5668]

Ask him how much he pay for lsd

[@danielpersad5789]

It was around 500usd

[@cecilschelborn5668]

@@danielpersad5789 4000 with shipping and wat ratio thks

[@danielpersad5789]

@@cecilschelborn5668 shipping was about ttd1000.00. This is just the lsd we got. All gearing remained the same as that wasn't changed

[@willis23jm1]

Can u post a link to purchase

[@cecilschelborn5668]

@@willis23jm1 u read my mind

[@billfrev]

very nice build

[@danielpersad5789]

Thanks man

[@gibememoni]

nice build

[@danielpersad5789]

For sure. Thanks