4R100 - Did not expect that.

[@v1-vr-rotatev2-vy_vx31]

We need to clone you many times over Richard,,, society can't get enough of this, and your expertise..

[@AshGTE]

Praise the Algorithm! It brought me back to Richard and Teresa. Glad to see you're back!

[@DillonTurner395]

Yes love to see yall back, stumbled upon this like some others and glad I did!

[@richardteresacricheducatio3542]

We are excited that you found us. We are excited to be back. Thank you for your support.

[@stevenfarley4738]

This gentleman's depth of knowledge never ceases to amaze me.

[@richardteresacricheducatio3542]

Thank try hard

[@billmonroe8826]

Richard and Teresa, keep working towards that 100,000 subscribers where you once were!! 😊

[@cuttnhorse2013]

Richard, Teresa, I’m a long time fan from East Tennessee. I missed out on what has happened with thing earlier in the life of your business. Now you son is not around, so I figured something bad has happened within the family. I still hope that someday if I have a transmission problem, hope to get out to you all for the repair. Stay strong as I see you all are. God, will make things easier and better things will continue to happen your way. Ronnie

[@Failure_Is_An_Option]

Why do you bible bangers never stay in your own lane? Always the first to assume, and pass judgment.

[@Bodie2020]

@@Failure_Is_An_Optionwhile they did assume that something went south in the family. Not one word in their statement was judgemental. In reality you are the one who assumed and passed judgement because of your disdain of religion. The funny thing is atheists in general get bent out of shape over another’s belief system. Whether you believe or not you shouldn’t get upset how another lives.

[@oddwad6290]

The biggest trouble disbelievers have is their philosophies often fail to provide enough hope during bad times ? Hence , " there are no disbelievers in a foxhole " ? See nihilism and Marxism .

[@dmcnamara9859]

Not brainer something went down in their family. Very similar to Mr. Rawlings channel " gas monkey garage" .His son Chase went Audi5 oh! so fast. Not rocket science his dad and aunt had to let him go and Mr Rawlings never acknowledged or mentioned his son getting let go. Fame,money does weird things to people,worse when it happens in the family.

[@markcollard9326]

It is obvious the struggle is happening in the family. Past videos show it quite clearly. @@dmcnamara9859

[@eddiesheeran5791]

I do a lot of mobile mechanic work on all makes & models. I love watching your transmission tear-downs and learning from all your years of experience. I'm not comfortable going that far inside an automatic! People ask me if I can rebuild theirs and I say "no way, you really need a specialist for that." Thanks for handling these transmissions Richard & Teresa! You do top-notch work in a really challenging field.

[@richardteresacricheducatio3542]

Thank you very much your words mean a lot

[@johnkordish3546]

I am learning something new today this is a great way to know how things work in a transmission

[@r.peters4314]

Q

[@billynomates920]

i'm a little disappointed youtube didn't recommend your new channel earlier given how often i watched the other one but better late than never, i'm here now or as you guys say: right back atcha! 😄

[@richardteresacricheducatio3542]

We are excited that you found us. We are excited to be back.

[@Mrcopper204]

Funny we are building one at our shop right now

[@dgmcke3074]

Richard can remove a snap ring in the dark!! THE MAN

[@dougnorton5143]

I have successfully rebuilt many engines from Toyota to Chevrolet and many others. But transmission have always been a nemesis of mine for some reason. Way back in the day, I helped with a 727 Torqueflight and that is the only transmission I have literally been into. R&R quite a few but that is different ballgame altogether. I am literally in awe of Richard's ability to remember where all these small parts go and what function they serve. Much respect for all professional transmission rebuilders that take care of the details like Richard!

[@randyfrommesaarizona6927]

I serviced my e450 this morning after watching someone else’s great video and then when done a Precision Transmission video showed at the top of my feed so I watched it. It was an early one with Richard not wearing gloves and I was cringing because I currently have a big cut on the tip of my thumb, so of course I wore gloves. Then his next video he wore black gloves, then his next was green gloves and first day with his new Milwaukee cordless. I need to get back to the garage and fill my tranny, but it’s been so comforting watching the pan debri in these videos, knowing that mine looked great - just 49,000 miles on my ‘04 Born Free RV.

[@blown572hemi]

I like this platform better. It's after hour's and there's no big hurry. Keep up the great uploads for big dummies like myself.

[@bobferranti5222]

Richard, I hope you and Teresa will feel better soon. I love your video's and look forward to every one.

[@richardteresacricheducatio3542]

Thank you very much

[@dcole109]

I really would like to see the build video for that transmission with all the mods needed to make it shift correctly and tow well. I’m glad you both are healing and I like your new shop!

[@johnjelinek-g7b]

This was THE most complicated auto trans (or trans of any type) I've seen to date . I must have missed others you have done on these . When a customer screams about the high cost of rebuilding one, just refer them to these videos . lol As always, the master done a fine job . Thanks Richard and Teresa . Ah, and Annie too . :)

[@WreckDiver99]

Several shops are just doing trans swaps now. Cost of labor far exceeds the cost of a new/rebuilt unit. Dealerships in my area are now charging $225/hour for shop work. A 7 hour R&R has nearly $1600 in labor alone. Add to it the parts (with the obligatory 300%+ markup) and you're at over $5K in many cases, especially if you need planets, pumps, etc. My Tahoe is at a shop now (3 weeks and counting due to a mess up on their end), and they don't rebuild transfer cases any longer. They can buy one for

[@johnjelinek-g7b]

Yeah, it's been off the hook for a long time now . When I first started working for my dad, our labor rates were 12.00hr. lol There's never been a time I trusted anyone but myself or my dad to touch my rigs ... Well there is one, Richard . :) All most mechanics (oops, "techs") can't even trouble shoot anymore, do a proper tune up, do brakes, differentials or anything . And they get paid as they do . But it's the same in most jobs . There are a few mechanics out there that can, and they're all called "masters". Let's face it, we're done . lol @@WreckDiver99

[@lightningdemolition1964]

I just rediscovered your channel. I had wondered why you stopped posting and kept going back to see if i missed something. I watched all the teardowns even though i will never do one. Glad i just randomly found you again.

[@clivejoyce9437]

Big hello from the UK, find your work fascinating and your knowledge is endless. I am an engine man myself and avoid auto transmissions as they scare me 😊. Keep up the excellent work and super videos.👍👍👍

[@Tweek023]

Also reaching out from East Tennessee! Your family has been my number 1 resource for US domestic transmission information. I have learned so much for free, I just wish you all worked on Hondas/Acuras xD

[@g6qwerty]

seams like all the wear stuff from the other transmissions would apply besides the, transmission specific upgrades and updates.

[@CorvetteBill364]

Richard / Teresa it is a pleasure to watch you work Richard . What great knowledge you have an most genuinely work to share. I am so surprised that your subscribers are over a million. But no one wants to work on these bouuger bears. I sure would love to see and meet you in that beautiful shop. I pray the Lord.Jesus touches your body and returns you to good health and health and happiness..

[@lisalazzeri1520]

Richard & Teresa are awesome at what they do. Still love the 4L60 uograde with the 3:43 gear swap ❤ get well my friends sending prayers for speedy recovery

[@richardteresacricheducatio3542]

Thank you, our friends

[@hsiewert1312]

Nice to see you educating us again, missed your videos.

[@trxcummins7388]

Man I'm so glad I got my 87 Lincoln into your shop before you retired I am so happy with the results thanks again for all the work you've done on my transmission it's still working great👍

[@eluder25rs]

OMG you're back 😮😊

[@JohnMcCullough-wr9hj]

FYI at about 52 minutes some issues on the sound. Thank you so much!

[@richardteresacricheducatio3542]

Thank you for the information

[@timr31908]

I love your videos Richard... I love the Ford 427 engines and what transmission would go to that. The C6... Holman Moody would love to have you on their team...😊

[@lonniebrock3282]

Richard you have a wealth of knowledge these boys that is in this line of work should be taping these videos and watching them over and over

[@Bill_CBR]

Richard, you're back!!!! I've only watched about 45 seconds of this video, but I'm so glad you're back.

[@therev6689]

Best mechanic on KZbin. Love the info over the years. Keep it up y’all 🎉🎉

[@amatod4]

Another great mechanic is Eric, South Main Auto channel

[@billcarlson1730]

I have taken a lot of things apart in my 65 years, not a chance in hell I would attempt to rebuild that transmission. Yikes! Well done sir!

[@jont0315]

I was wondering what happened to your other channel as to why it stopped.. glad I found this and and see you all are ok and still getting it done🤘🏾

[@rgamore]

You know, if something ever happens to you, there is a world on knowledge going with you that I doubt there is anyone person could ever have. You are amazing..... :)

[@gloomy2003]

Большое уважение за работу и профессионализм!

[@gillboardman8998]

Warm greetings from sunny Eastern Washington 😎👍

[@genealamos9888]

wow , fantastic to see you and teresa again! missed your dead pan wisdom and techniques. so glad this popped up today.. best wishes for your new channel! back at you!

[@shopdave7489]

Welcome back. I did not know you were making videos again, this one just popped up on KZbin. I have subscribed.

[@MichaelVLang]

Glad I found your channel again. Thanks for sharing skills and knowledge.

[@bryanlong1363]

Glad you are back…..somehow these videos are very satisfying. When I service my transmission I remember the things you’ve shown, common mistakes people make. Thank you and God Bless

[@markseaman4750]

I have a 2000 F250 7.3 Powerstroke. It’s a low mileage (97k miles) cream puff. I think it has that transmission and watching this video is going to give me nightmares tonight.😱

[@victorbellan8357]

Would like a see a build video!

[@RejectReality97]

You'll never see it from him thats for sure 😂 dudes a joke

[@crackpotfox]

Been looking forward to another 4r100/e4od from yall. My 7.3 e4od slips a touch when shifting into overdrive so im planning on rebuilding it myself soon.

[@amatod4]

I really missed precision transmission videos. It's nice to see you're back.

[@morgangeorge311]

Congratulations on coming back I have missed your content. best of luck with the channel

[@nutmuffin1]

Oh my God I can't believe I found this video. I am so damn excited to see you back online🎉 I missed it when you had to leave. I'm subscribed, looking forward to anything you can put online.

[@Merescat]

Subbed! So glad to see Richard again in-front of the camera to watch a master working on a transmission!

[@walterchapin33]

Impressive, as usual.

[@seangray933]

Miss your precision videos. Glad this popped up scrolling. Subscribed again.

[@robertpierce9385]

This trans makes me love my allison 5 speed. I appreciate it more so now than ever. Jeez this ford stuff is too much.

[@simonpeter5987]

Where you been man? Glad you're back!

[@billmonroe8826]

They said the flu had them down.

[@petes7796]

Great to see you again 😊

[@marty0715yt]

Outstanding!! Thanks for your guidance. I'm NOT doing it.

[@mike94560]

They had a update to the high pressure oil pump O rings. My 2001 had a big oil leak coming from up top. Service bulletin fix to replace O rings with newer versions.

[@Carcrafter7165]

Towards the end the sound was cutting on and off. Wow that’s a lot of transmission and to remember how to put it back together looks very complicated but with your experience it will be better than before. God Bless Y’all.

[@jonesjones7057]

Glad to see you back. Subbed, again.

[@pjimmbojimmbo1990]

Ford spelled Backward, is an Acronym for 'Driver Returns On Foot' My only experience with Ford Transmissions is with the 3 speed in my 66 Galaxie, and my Company F250 with a V10. That Transmission failed less than 100 miles after the Warranty Period. It was covered, cause I had taken the Truck in about 1700 miles before, but some Part the Stealership wanted to replace, was gonna take a few days to arrive, so they gave me the Truck back, and a week later it was on the Hook going back to the Stealership.

[@kirks1959]

God Bless and glad to see you back.

[@williamv3134]

Great work and great video……as usual….

[@Mrcopper204]

Richard trick for your Milwaukee. Buy the shortest snap-on, Mac or Matco extension. Red lock tight it to the gun. Problem fixed

[@firstpersonjay5655]

I’m looking to rebuild a Mercedes / Chrysler transmission 722.6(72) AWD transmission I would love to see you tear it down and rebuild it worth every penny

[@truracer20]

I like the 4r100, they never spawn extra neutrals like GM offerings often do. At least in my ownership experience. On the park paw, it's light engagement isn't a problem, you have a much better chance of the bolt falling out of the steering column linkage.

[@richardcreel6282]

Another top notch disassembly. How do you remember all the little nuances of all those transmissions? Have you done an assembly video?

[@58Tommy]

How about showing "your" assembly process?

[@robertpierce9385]

Yeah I needed that when I built my allison 5 speed

[@Mrcopper204]

I missed you guys.

[@philip4x4guy]

Should have been titled "not another Chevy trans." 😅 Nice to see the Fords go bad eventually!

[@guyarmstrong3521]

Glade to see your back at it loved all your earlier videos helped me on a couple on trans. Thank you. I do have a question about a 72 I think c4. The front clutch the steels are all to thick do they have thiner ones or do you machine the last one. The old one are very badly burned. Thank you for your time. Guy.

[@lawrencehalpin6611]

Thank you for the great video and education. Kind regards

[@halbertking2683]

You make it look easy .

[@MXstar189]

can we get the 4L60-70 rebuild video...... I have put together enough info from the teardowns to successfully rebuild 2 of mine but I am sure I am missing stuff that you could share.... anyway thank you so much for the videos hope all is well

[@rolandaguilera5965]

Richard I’m in Houston and need my 2016 ford f150 diagnose for rumbling noise and transmission noise while accelerating at 35-40mph

[@jeffkomplin2052]

hello not to be critical but the shaft that engages the parking brake when held in place with the output flange adaptor holds it the parking brake then will be fully engaged

[@peterfoster4025]

Hi Richard and Teresa Peter coming at ya !what do you clean hard parts with after pulling it down I was think hot soapy water?

[@richardteresacricheducatio3542]

Parts cleaner solve that we get at tractor supply 5 gallons buckets

[@CMDR_CLASSIFIED]

Perfect timing. Just got that same truck, just in bronze. Yeah, they are a big machine. Is there any was that you know of to change the overdrive off button on the shifter to act like the tow/haul feature of later models? Thanks. Have a great day Richard and Teresa. And God Bless. o7

[@jimsworthow531]

Excellent knowledge to remember all of that sir; i have a 2001 ford 7.3 diesel 4x4 and i found pieces of clutch in my pan last fluid and filter replace; its only a matter of time until she quits isn't it? Please give it to me straight...thanks...

[@RANDOMNATION907]

I have a question about Ford Automatic Transmission swaps. I have a 1977 F-150 with a 302 & a C4. Will an AOD fit and function normally without any computer control? My friend keeps telling me the AOD is computer controlled, and I keep telling him that He's thinking of the AOD-E. Springtime is near and I want to start scouring the salvage yards for a worthy AOD core to rebuild. I appreciate any knowledge you may care to share. Thank you.

[@95f100]

First off I love your videos and immense amount of knowledge. I have a question about a ford 5r44 transmission. i have a 2004 Ranger with a 3.0 and 5 speed auto. I don't like the way it shifts, especially into 4 and 5. transmission will not shift into these gears unless i'm doing at least 40 mph and when it shifts it is almost at the same time. if i turn OD off it will shift into 4 then will shift into 5th when I turn od back on. It seems to have a fairly high stall speed on converter. I believe that is actually stock configuration. Would a lower stall speed help? could there be something going on with the valve body? could there be several problems? Thank you for all the educational videos and explanations that go with teardowns.

[@FreedomInc]

I purchased a jasper trans for my 02 f250 7.3 4x4 crew cab. I purchased all new sensors ,bypasstube, etc. The sensors were different lengths. At first it wouldn't shift correctly. The shop switched the sensors around putting the lomger one in the rear. They were definitely not the same lengths. I'm guessing I need to go ahead and order a new front sensor? I have t had any issues yet.

[@adamsorell4851]

. the pto version has 2 different length sensors. is yours a pto version?

[@FreedomInc]

@@adamsorell4851 no. They wasn't. I've read multiple multiple forum after forums about this topic. I didn't pull the old ones out to check. Now the input sensor is the short version and the output sensor is the long version. In reverse it wouldnt shift correctly. Now it shifts fine and isn't throwing any codes. I've onky git a few hundred miles on is so I may just go ahead and change it. Or hope it grenades in the first 99,999 miles. Ill probably change it. I will say that I went to three parts stores. All three had the same part numbers. Although apparently they are supposed to be the same. At all three there was a short then lomger sensor.

[@robertpierce9385]

The size makes me see how allison is better now for sure

[@robertmcbee4671]

WOW! Always thought I wanted to work on an automatic transmission... nope! If I would have worked on that I'd have door stop parts for the whole neighborhood! How do you remember all that?? Do you ever work on the Alison transmissions for Chevy\GMC? Would love to see what's in one of those!! Thanks for the learning and keep up the good work. And take care of yourselves!

[@timwoodring7346]

Love watching your videos. I just found out about the new channel. I thought you guys stopped the videos because every time I would check the old channel there wouldn’t be any new videos. Question- do you do transmission rebuild videos or just videos taking transmission apart??

[@arfreeman11]

Would you be willing to post a list of what parts you usually use for upgrades on these?

[@merlin5735]

Would you be able to recommend a good transmission shop in Southern California?

[@jamesb7224]

Great videos as always. What is the maximum transmission temperature you want to see say pulling a 6 or 7 thousand pound trailer in the Texas heat. People have opinions all over the place. I am interested in your opinion.

[@christopherdawkins5392]

I have a lowish mileage '99 that has a tinny sound when warmed and idling. Now I'm wondering if that snap ring has let loose and rattling around on my coast clutch housing....what are the symptoms when that snap ring lets go?

[@jessewright1491]

Mr. Richard the overdrive will not engage. Lost u joint back in April and it destroyed the case. Parts put in another case and no overdrive..

[@robertvillafan1220]

hi richard do you have any learning aids to help with rebuilding a 4l60e. i want to rebuild the one out of my 2001 s10

[@dennisbutts5925]

Is it possible to ask you about a 700r4 that won't move in reverse?

[@freddiejupiter442]

A question from a novice: Might it be a GOOD idea for that parking pawl to just be touching slightly in case of someone (if it's possible on that truck) shifts into park at speed? I'm assuming damage either way, but maybe less in this case.

[@robertash883]

i’m in Alabama and i know you don’t like having trans shipped to you to rebuild and then have it installed by an owner, so do you know of a good shop on the level of yours in northern AL or TN that you could recommended for a TH350 that’s going to back up a Stroker 383 W/440Hp?

[@YoungOzzy432]

Well, the engineer sure did the number when they made that pile 😂 but it’s. A great transmission not as good as the newer ones definitely better then the 4r70 nightmare

[@markglenn4929]

How do you fix a corroded actuator cover? Case has corroded away and now will not seal.

[@Latuya-y1n]

Thanks for the teaching richard them ford need to get better shift solenoids they tend to bang in the gear n thats the 2013 eco boost 6 speed got 6 of them crap in there n right by module in transmission oil pan n on them nnew escape it starts to slip on awd eco boost saids to change oil every 30000 miles but its at 56000 or so n its rental but slipping like clutches in tq converter out

[@miltonhobdy9873]

How can I send you a part you need for your Milwaukee tools? Its a new ring that keeps the sockets and extensions from falling off.

[@brandonfritts3297]

I have a 4r100 in a 2001 Ford Excursion that i would like you to work on...is that possible?

[@novaaldo1735]

Is there a shop in Amarillo that rebuilds convertors ? I have 727 convertor I would like to have rebuilt vs replaced

[@bigmurph1447]

Ain't worth getting them rebuilt just get a new one

[@dunbarautomotive]

Richard is it okay, or possible to run the diesel front pump in a gas transmission with good results 🤔

[@richardteresacricheducatio3542]

Oh definitely

[@dunbarautomotive]

@@richardteresacricheducatio3542 I have been following for years thank you sir and Teresa.

[@peytongreene9492]

Do you still build transmissions for the public?

[@RichardReid-g1w]

Download Drake you did a real good job rebuilt my transmission by😊 what you talk

[@nicholasjames5313]

Richard I've got a transmission question. What would cause an 83 th400 to start spewing the fluid out of the dipstick/fill tube and have the neutral act as if it were the drive gear?

[@richardteresacricheducatio3542]

I would say the forward clutches are welded together. That’s why you have forward in neutral wants the seal blew out in the drum now you have an internal pressure leak into the case of the vent circuit

[@TyRC12]

Have a question. Just bought a truck with this transmission. The fluid isn't pink. It's more maroon. Do you believe it would hurt the transmission if I replaced the fluid? What if I'm not sure if it's synthetic or regular? Thanks for your videos.

[@Jimmyky77]

What happened to the other channel with the son helping?

[@rhegafd]

Question, is fixing OverDrive on a 46RE automatic. 4 speed do'able?

[@richardteresacricheducatio3542]

If the overdrive is wiped out, then the transmission would pretty much have to come apart and be cleaned out and repaired

[@rhegafd]

@@richardteresacricheducatio3542 What state is your shop located at? I have a Dodge Dakota R/T that I would like to have the transmission rebuilt. It works but its had a shift kit installed in it before I owned it and its not adding to the driving experience!!

[@pl-mn2ro]

@@rhegafdAmarillo TX

[@DumbCarGuy]

I have that same truck but an 01, had the tranny rebuilt 4yrs ago and had a billet triple disc put into it. A few months ago i started noticing that when I take off something feels like its shuddering or chattering or something like that as if i am running a Ujoint without needle bearings. But after it gets up to about 20mph or so that shaky vibration goes away. Almost feels like the clutches are worn away. Any quick online diagnosis you can point your finger towards for me?