4Runner Raptor Lights Install, 2022

Buy Raptor Lights for Toyota 4Runner ⤵️
www.4runnerlifestyle.com/prod...
Buy TRD PRO Grill with Raptor Lights for Toyota 4Runner⤵️
www.4runnerlifestyle.com/prod...
Heritage Grill for Toyota 4Runner (4Runner Lettering on grill in this video) ⤵️
www.4runnerlifestyle.com/prod...
Artic Camo 4Runner Lifestyle Tee Shirt⤵️
www.4runnerlifestyle.com/prod...
For questions and Concerns reach us by Email: [e-mail]
A complete walkthrough of the Installation process for Raptor lights for toyota 4runner in 2022, this video will demonstrate how to install raptor lights for 2020+ 4runners including the 2021 and 2022.
The 4runner in this video example is a 2021 trd off road with our Heritage Grill.
#4runner #4runnerlifestyle #4runnermods #4runnermod #overland #overlanding #raptor #raptorlights #toyota #toyota4runner #4x4 #4x4offroad #toyotausa #4x4cars #install #tutorial

[@ladymargrethe]

I love how this video was made..very clear installation instructions and video. Thanks so much!

[@johnrpomeroy]

I LOVE IT!! I installed to the 3rd fuse down on the left which is "IGN" & is 10A, & the lights are on whenever the ignition is on, no matter where the headlight switch is & that is what I want. They look killer & quite bright. I got the top 4 amber color. 2022 TRD Pro.

[@15TheKing15]

I tried that one and got crazy warning messages on my dash . Any advice ?

[@Epresti92]

@@15TheKing15did you put another 10A fuse in the add-a-circuit? Both slots will need a 10A fuse installed

[@KendrasEdge757]

@@Epresti92yeah a lot of people don’t realize this. I’ve had mine ran to the INJ fuse under the hood fuse panel, but I think I’m going to re-run the wire to the panel by the e-brake. Had it for a year with no issues under the hood; but less chance of issues in the cab. Plus there’s extended covers now for the inside fuse panel that allow it to be covered with the add-a-fuse.

[@Epresti92]

@@KendrasEdge757oh nice! I wasn’t aware those were a thing. Where’s the best place to look? I’d like to cover that fuse box if possible

[@ryansullivan4168]

@@KendrasEdge757which fuse did you plug it into?

[@johnrpomeroy]

Hi Truman, You have a good personality to be doing these videos! I like the way you always have a pleasant smile/smirk on your face!! Now, how about the Fang Lights video you said you would make?

[@andrewbotta7214]

can we get a video on installing the lower grille setup? the parts that came with my kit are completely different and I can't get them to work

[@ItsStoof]

Where did you get those fog light bracket led lights? The ones between your headlights and fog lights? I can only find ones that fill that whole area! But that this line looks so much better!

[@roncook3034]

Great video. Just purchased a 2016 4Runner. I’m going to purchase the bulbs and do the install myself, your video is that good. By the way, what model watch do you wear in the video?

[@mseriously911]

For those receiving slightly different items than what the video shows, the crimping sleeve is now a solder stick which requires a heat gun. It is pretty simple to connect but just an FYI that you need this in order to install. Also, the OEM fuse you pull out needs to be plugged into the add-a-fuse connector BUT it will not fit newer years since they use the shorty fuses where the adaptor requires the full size fuses. Again, this isn't covered in the video or the site so it was a 'gotcha' when trying to install. The fuse cover will not fit back on after you add this kit. Look up 'Dr.KDSS' who sells a fuse box cover so you can have some protection over the fuses.

[@enazim1]

Hey.. Is there a solution for the OEM fuse not fitting in the adapter? I'm interested in this kit for my 2022 ORP

[@mseriously911]

@@enazim1 the oem fuses are now low profile fuses. You just need to buy a regular 10 amp fuse and it will fit in the add-a-fuse. The kit comes with the correct fuse so you can reference it to buy the second one needed. I have a 22’ pro and it worked fine.

[@DarthRoach]

Seriously thank you. I was getting pissed trying to install mine. Guess I’ll undo everything and run to Lowe’s. Pretty frustrating that they don’t mention a thing about this anywhere when you purchase these things.

[@ryansullivan4168]

I was not able to get it to fit, my harness was way to short and it didn’t fit into the short fuse slot they wanted it to go into

[@mseriously911]

@@ryansullivan4168 did you do any unnecessary routing of the harness that caused you to run out of slack? I don’t have that issue but perhaps you were sent something in error. I have a 22’ which uses shorty fuses and it worked for me. Hope they can help you!

[@thebushchechen]

Oh u do have build vids sorry for previous comments asking for build vids I just found your channel I love it. How do I get a 4runnerLifeStyle decal or 2 for my 91? 😅

[@DarthRoach]

My girlfriend got me these lights for my birthday. Trying to install is awful. Y’all didn’t include in any instructions or on the website that I’d have to use a heat gun to join the wires so I crimped them and broke the connector. (I don’t know anything about electrical) then it didn’t come with a second fuse in the adapter so I’ll have to go get that. Either include everything you need to install or be up front about what’s needed. Turned a 30-45 minute install into a couple hours.

[@grnemtw0]

Isn’t the tail position fuse noted as TAIL for the tail lights?

[@michaelmonier4665]

Awesome video. Thank you!

[@microa9764]

Why do people refer to the 4Runner as "rig?"

[@beaverollie1]

Great video. I bought your fang lights though and those things took forever to wire with no diagram. Can we get a video soon for that so other people don't struggle as much as we did with that install?

[@4runnerlifestyle]

absolutely, thats a good point they can be a little tricky! We will get a video on this in the que!

[@breezyy9696]

NEED the 4runner emblem you’ve got on the front bumper! Is it custom?! Where can I get it?

[@1962gps]

I just purchased the Raptor lights and the OEM switches that I want to use to turn the lights on and off. What is the the way to make that happen. I just everything today, so I'll probably be getting my order next week.

[@mrmoua2u]

I have a SRS airbag malfunction on my 2023 TRD pro, can I put the fuse on another spot?

[@shawnsponds]

How do they come on? Are they on with the auto headlights?? Can they be run as the DRL?

[@DCTexas22]

Gotta say it’s pretty janky to send out smaller negative terminal loops. Have you guys picked up on the supply of the proper size?

[@xerian16x13]

Is this the same process as the one with only 3 lights?

[@RC.56]

Why can’t you go straight into the fuse box in the engine compartment, EFI no2

[@john-ck8sw]

My ad a fuse has a 15 amp fuse in it. Do i have to replace it with 2 10 amp fuses. ??? I have a 2020 the fuse in my truck does not fit in the ad a fuse. Do i have to buy two new 10amp fuses that fit ???

[@mrtaykay9]

Great video it helped me set my lights up. Is there an option to have them on with day lights ?

[@Ant_TitanUp]

Where did you get the 4runner badge for the grill?

[@LexusGX460-OFF-ROAD]

wow these integrate nicely into the stock grille

[@4runnerlifestyle]

we should note that the upper mesh piece does need to be swapped to the pro grill style like in this video the factory grill was swapped to the heritage grill

[@robifleming]

@@4runnerlifestyledoes the stock pro grille work or do I need to upgrade?

[@Epresti92]

@@robiflemingstock pro grill works

[@TopHatGent]

how is longevity? I recently was disappointed by cali raised that didn't even make it a full two months before one has moisture inside.

[@thuanchuong5285]

so the top left fuse is INJ fuse one ?

[@medeirosmichael11]

I plugged in to the recommended fuse & the lights stay on…is this normal

[@AaronGermaine]

I want the heritage grill that says 4Runner but can’t find it on your website.

[@LeonWhitington]

I am trying to install the Raptor 4 light set up on a 2022 TRD Off Road. I am not able to get the wiring through the firewall. I have pulled the grommet and the wires are so flexible that they won't go. Is there a way I can hook up to the fuse box under the hood next to the battery??

[@donnyd8890]

you could just use a wire snake

[@codryatho10]

Got a question about fuses... I don't understand anything on it but if my lights have a 5 & 10amp instead of the 2 10amps, do I still aim for a 10amp fuse?

[@925Chester]

Is the raptor light running only if the headlight is on? It looks like mine does not turn on during daytime with Auto light mode in my 23 4R TRD Pro... but seeing other 4R raptor light running with DRL during the day makes me wonder what's going on...

[@natestain7103]

I have a 2023 4Runner TRD pro as well. Got the best warranty possible but am wondering if this electrical add on will void the warranty

[@micho8874]

Is it me or do the links not work for everyone else as well? It takes me to the website but says page not found

[@natestain7103]

Say all the sudden a major electrical issue goes wrong in your 4-Runner. Does having these lights installed automatically give the dealer the option of taking a big dump on your warranty and charging you full cost for repair?

[@JamshidNawabi]

Thanks 🙏 very helpful

[@TravelsWithJ]

For my 2017 sr5, can i put it in my main fuze box or does it need to go behind the firewall down to the lower fuze box by the pedal ?

[@moorememoriesvideo7070]

I’m sure you have figured this out by now but you can definitely go to the main fuse box under the hood, that’s what I did

[@ryansullivan4168]

My cord ended up being short and does not reach all the way around the fuse box and battery, literally just have the cord laying over the top of everything cause it won’t reach

[@shawnsponds]

just received my 4 light for my 23 limited , lights went in great, the included harness red power wire is woefully short. I went the shortest route snugged and it does not reach the inside fuse box at the tail its about 5 inches short and it is pulled tight,

[@hardenxx1335]

Bro what fuse did you put it in? I have a 23 limited as well. Thinking of getting these

[@ryansullivan4168]

Mine is to short as well

[@b0094700]

I cant get my wires through the hole to the inside box 😢

[@came7494]

Why the tail position instead of the 10 ING?

[@gregorymanglona2667]

Is there a sire I can get the grill n letters the link is not working

[@Draino2110]

Please do a fang light tutorial

[@dylangeis8831]

I have everything wired, i accidentally ruined my first fuse connector so i went and bought .22 18 gauge connectors and now i cant get anything to turn on. Also when i plug the fuse into the fuse box all that happens is i lose my tail lights and no raptor lights turn on. Any help would be greatly appreciated

[@guster7578]

Same happened to me, did you get this resolved?

[@hi5o386]

wondering if the 4lights for lower grill can connect to the fuse box under the hood instead of the fuse box inside the car

[@4runnerlifestyle]

It can however we still recommend running to the one on the interior. In the case of running it to the engine bay fuse box you could run it to the INJ fuse position in theory.

[@hi5o386]

does the kit comes with both connector for the engine bay and interior fuse box? Thank you

[@MT_53]

Dude...where did you get the "4Runner" front grill lettering emblem??

[@garrettlopez915]

They used to make them but don’t know when they will be back

[@donnyd8890]

wiring them to IGN instead of TAIL is a better idea so they turn on whenever you turn the car on

[@johnsonja329]

Where can we get the grill that says "4Runner"?

[@hi5o386]

when should we expect restock on 4lights lower grill? Thank you

[@4runnerlifestyle]

At the moment we're looking at maybe 4-5 weeks

[@jacobcorbridge4906]

Thanks for explaining how to put the clips back in haha I broke a few out of my idiot rage before I thought to push them back up

[@MrPimpBaller]

What alternative fuse do you suggest? The tail lights won’t function with the one in the video, which causes issues with driving at night.

[@4runnerlifestyle]

Thats really odd, we haven't encountered this issue. The tail lights should still work possibly you have a faulty fuse? we have a team that helps with this sort of thing, they can be reached [e-mail]

[@MrPimpBaller]

Just emailed you!

[@timothyhirata3367]

Did you get this fixed yet?

[@MrPimpBaller]

So the video doesn’t mention that you need to plug in the fuse you take out, to the add-a-fuse. Also the 2023 4Runner fuse isn’t compatible with the add-a-fuse given. So I had to buy a 10 A fuse from autozone and place it in to make it work.

[@timothyhirata3367]

I found same row going down 9 slots works. 10A Labeled IGN NO.3 Here’s the link: kzbin.info/www/bejne/lXiZf3amd7Nppqc

[@xcit]

The kit you guys sent me had a 15amp fuse. Is this still going in the 10 amp fuse location?

[@ryansullivan4168]

Mine came with a 15 amp as well

[@ChiefJJ09]

Yes add a 10 amp Ro it and install . I put mine in the auxiliary 2 spot and it’s on when the ignition is on.

[@keed333]

any word on when the AJC fang lights will be back in stock?

[@4runnerlifestyle]

Unfortunately we've seen a couple delays we're looking something like maybe a couple weeks from today from what we can see.

[@keed333]

@@4runnerlifestyle sounds good, appreciate it!

[@4runnerlifestyle]

@@keed333 np 🤙🤙

[@kevinjames6820]

Can I install a on off switch on the the raptor lights and how?

[@4runnerlifestyle]

We don't recommend it but yes, the switch has to be on the positive wire between the fuse box and the lights. Probably the best way is to use an spod or Auxbeam www.4runnerlifestyle.com/products/auxbeam-6-gang-led-switch-panel-kit?_pos=1&_sid=a73cd2c16&_ss=r

[@b3z3rk34]

Is it bad to leave the fuse cover off after installing these?

[@mseriously911]

It is a unnecessary risk leaving it unshielded. Search for Dr.KDSS fuse box cover.

[@winerolecram2856]

i bought raptors light from you guys, my add a fuse only have one fuse installed did you install the original fuse? where did u get the other one? thanks

[@jakebreedlove4707]

I have the same question!

[@nicholasheinrich664]

Same

[@reformedj24]

Take the 10a fuse out of the fuse block where you are plugging into and it add to the add a fuse.

[@SalvadorAndradeHN]

Great video thank you for uploading, you didn’t show/ mention if the fuse cover fits/ stays shut after plugging the add a fuse.

[@4runnerlifestyle]

Thats a great point! In our case it doesn't go back on, however there are alternate low profile ad a fuse options out there from autoparts stores that might allow you to install and still close the cover but we can't confirm that just yet since we havn't tried them out just yet.

[@kikito4151]

Would these fit on a 22 highlander ?????

[@joalvarez6252]

Hellz yea brotha!

[@bobokanavlogger5825]

So with this wiring, it turns on with the headlight correct? Thanks

[@jeffrivers9952]

That is correct

[@jeffhenjes1722]

Smoked amber is best. Can't even see the lights in the grill with the lights off.

[@tclbgh]

Is there another tap besides IGN? I’m already utilizing IGN for my Morimoto DRL. I’d like these lights to be on with ignition

[@lcatalla7292]

Where can I get the upper front bumper overlay with 4Runner emblem?

[@mbh427]

Their website

[@4runnerlifestyle]

this? www.4runnerlifestyle.com/products/4runner-stealth-grille-2014-2019?_pos=4&_sid=73379d8d1&_ss=r

[@blackopsXghillie]

Do they always stay on? So far they only work with my low beams

[@jeffrivers9952]

You will have to plug them into a different fuse location if you want them always on when the engine is running

[@ahmedkassem1443]

@@jeffrivers9952 which fuse location?

[@jeffrivers9952]

@@ahmedkassem1443 i believe it's the efi 2 slot if I'm remembering correctly *Edit*or any that say IGN should work, they should be controlled by the ignition

[@ahmedkassem1443]

@@jeffrivers9952 thank you!

[@johnrpomeroy]

@@jeffrivers9952 I installed to the 3rd one down on the left which is "IGN" & is 10A, & the lights are on whenever the ignition is on, no matter where the headlight switch is & that is what I want. They look killer & quite bright. I got the top 4 amber color. LOVE IT!!

[@24hrstolive27]

If you know anyone looking to buy a 2008 4Runner v8 with 28k miles only. Lowest in the nation. Let me know please

[@prestonkoprivnik4207]

What kind of watch is that?

[@dcooper1994]

Pretty sure it’s a Suunto

[@America1st69]

I installed mine looks factory

[@gregorymanglona2667]

You have a link for this grill in stock I'll order asap thanks

[@tjsylvia285]

can't get anybody to respond from 4Runner Lifestyle. I bought a bracket for my Maxtrax to mount to my truck, 3 weeks ago. They took my money (Over $400) but wont tell me when it will ship. I have emailed them several times and I have not received any emails back, except the ads they flood my inbox with. They don't have a phone number, and when you do contact them by email, you get a reply saying not to keep emailing them and they will get back to you when they can. It shouldn't be this hard to do business with a company unless it's by design. Do yourself a favor and shop somewhere else.

[@_madpanda]

I feel you. That's why I shop parts from the original manufacturer/dealer. I stay away from small businesses or third party sellers as much as I can esp. if it requires shipping. Hope you get your part(s) soon.

[@publiocasillas7226]

Doesn't work.

[@mjoet731]

4Runner Lifestyle customer service is terrible.

[@Richytextex97]

CAn I use the Heritage Grill for Toyota 4Runner on my 2022 SR5 4runner?

[@mbh427]

I just ordered it for my ‘22 ORP, so we’ll see when it gets here.

[@4runnerlifestyle]

You technically can but It will require some funny business. The one in this video is a 2021 and the upper mesh grille piece fits but technically it doesn't interface with all the same mounting points, and it doesn't allow you to reattach the upper center bar the same way the factory ones do.

[@4runnerlifestyle]

@@mbh427 exciting! we will be here to help with any questions when you go to install!

[@mbh427]

@@4runnerlifestyle will most likely be needing your help since it will require some “funny business” to install :)

[@4runnerlifestyle]

@@mbh427 its really not that bad we just like to make it as straight forward as possible since many people don't like needing to do anything differently than the OEM set up. [e-mail] will get you direct with our guys Andrew and Truman (who do these installs) and I can help as well since we do have a 2021 here (the one in the video) with that radar cruise control and we can show you the work arounds to make it work! :)