Marui MWS ZET system VS VFC Mil spec Mil sim system

In this video we compare the Marui MWS ZET system to the VFC Mil-spec/ Mil-sim system and try to find out what is the best GBB system for your first GBBR.

[@fabang1138]

Just clicked on the video, and given your previous videos on the SR16 and Gen2 vs Gen 3, i know its gonna be a blast! Great work man

[@breakmachine7102]

Thanks for taking the time to break the guns down! I already ordered a VFC but Im happy with my choice as we want to be as close to real steel as possible!

[@despacito111]

As a newbie myself , Probably one of the best video explaining what’s MWS and comparing them.

[@residentkat]

Thanks! Yet another great video keep it up! 👍🏾💯

[@MiddleAgeGameruk]

Thank you so much!!!!

[@peter11256]

Great review! I would point out, though, that you definitely don't need to clean/relube your gun after every game if you are using proper ptfe grease. Unless you are shooting like 2k rounds a game.

[@bigk5746]

Im just throwing this out there, been playing for over a decade and got a KWA 416A4. Uses LM4 mags but new hop up, and bucking and for a stock gun it's been a hammer. Shoots a bit hot, but for a gun that you only need to slap a barrel in if you want and bucking rubber it's pretty awesome. None of the old LM4 problems

[@BSKorn1]

I have some VFC AR models and others from VFC. Cleaning after a few games is not necessary. They run and run. On some models the hopup is not so good but otherwise no problems. I'm glad I chose VFC. BTW nice video.

[@emiespi5276]

Good and clear content!

[@kenneth6896]

Get TM shoots well, smooth cycle, efficient, works every time. Get VFC for realistic milsim experience, interchangeable parts with ar15 ie. Charging handle, buffer tube, buffer, buffer spring & buttstock.

[@Jushi86]

But VFC works every time too^^

[@eldritchia]

Love my VFC BCM

[@ryanjames1942]

RS sling plates work on the MWS. The buffer tube externally is RS spec it’s internally that it isn’t. Hense why you can’t put a H2 buffer inside

[@joehernandez2506]

Not sure if you are already doing it but I do recommend using a ptfe grease instead of silicone. The silicone tends to displace easily and gets into places where it really shouldn't and causes a need for more maintenance than necessary

[@aceace6001]

SO witch one do you think i can get.. i want the best one money is not a issue

[@joehernandez2506]

@@aceace6001For me Super lube sells PTFE grease and synthetic silicone oil. If I want a smoother feel I'll do half silicone oil and half PTFE grease. Otherwise Super lube PTFE all the way

[@Youknowwh0iam]

You can use a rs buffer tube with vfc and run an H buffer weight 3oz for better recoil

[@anthonywood9632]

Is gbb a big thing in the us? A lot of vids see if gameplay from over the pond seems to hpa

[@aimkulkun]

Nice video TM MWS is da best😁 btw I love to support people who put their own money to review this kind of amazing video just like you did👍 Great work keep it up

[@xXYannuschXx]

Honestly, my biggest gripe with VFC is them using epoxy glue on some parts or screws. Just destroyed a MP7 bolt carrier, because the screws were epoxied and made out of butter.... similar with my buddy's G3, where they epoxied the nut holding the gas tube to the front sight.

[@EatMyMeatEnterprise]

Vfc for the win with the externals

[@missyoujoel3275]

I dont care what anybody says gbbr was meant to be as realistic as it gets. Reliability of course you want that but if you go by tokyo maruis thinking an aeg is or hpa is the best gbbr. Cause Reliability

[@JoshAllingham95]

I’ve already changed my mind from the mws to the Vfc all I’d like to know is how does the range and accuracy compare to the mws? Great video btw

[@MiddleAgeGameruk]

Hi there, the newer vfc rifles have been awesome, holding a 2" to 6" group out to 20m stock, but like all airsoft gbbrs have a lot of potential.

[@JoshAllingham95]

@@MiddleAgeGameruk that is perfect thank you for you’re reply. The Vfc is a thing of beauty

[@LaunchDiadem41]

AEGs where never an option for me :D i only bought one so i had one without cooldown if necessary

[@MartinJHarris]

I'd go with the Double Eagle N4 GBBR because it's cheap but very good... and if you want to get a TM later on after more experience then fair enough

[@Rockytherottweiller]

But why go with tm?I had over 6 tm mws and tbh de outshines them

[@TheCasualSirenEnthusiast]

Is there an mws buffer tube that is 1:1 milspec size for real steel stocks?

[@MiddleAgeGameruk]

Hi there, the mws buffertube will fit milspec stocks, but depending on the manufacturer, the amount of wobble varies. If you're still not sure, then you can swap it out for an Angry Gun buffertube for mws that's one piece and milspec. Hope that helps.

[@tseyou5981]

I have 6 - 7 GBBR,most of them are VFC products, one is KWA, honestly every single VFC gbb rifle has one or two issues, particularly bolt catch failure, dust covering spring issue. I bought URGI from TM recently although its a bit pricy, here is my comments for TM, 1/ great finishing, 2/ accuracy perfect, 3/ Very solid , no wobbling at all, including stock, 4/ beautiful packing, the only weak point is the coil is not so good as VFC.

[@darrengoh4338]

Hi what gas do you use on ur tokyo marui?

[@tseyou5981]

@@darrengoh4338 propane....

[@Wolfman_NV]

Do you have bolt catch issues with the vfc and how is it solved/what is the cause? Is it parts wearing down over time, and if so which part the bolt catch or the bolt itself? This is why I’ve always leaned towards zet system as I value reliability over realism in an airsoft gun I want to game with

[@tseyou5981]

@@Wolfman_NV there is no way to fix it, i got the issues when 416a5, URGI, both of them were brand new, i tried all possibly methodology to fix it which learning from various youtube clips, still no luck at all. I have kwa m4 with no issues, I have mws URGI which is perfect.

[@Wolfman_NV]

@@tseyou5981 that’s troubling.. thanks for the reply. With my old lm4 it was always the bolt wearing down where it catches, only way to fix was getting a new bolt. Are your 416 and urgi v3? Was hoping it might be sorted with the new gens. No one seems to talk about it much but sounds like it’s still an issue..

[@OSAMAAABINBALLIN]

What VFC rifle did you use in the video?

[@MiddleAgeGameruk]

Hi there, the rifle from vfc was there. Knights Armament SR16 E3 Mod2 gen3 from 2023.

[@rubenverliac]

Saludos, cual es mejor para sacar de la caja y que funcione perfectamente sin modificaciones? Gracias

[@MiddleAgeGameruk]

Hola, depende de qué tan realista prefieras tu réplica y si la usarás en exteriores o en interiores. Si es realismo, entonces VFC, si es en interiores, entonces Tokyo Marui.

[@rubenverliac]

@@MiddleAgeGameruk gracias

[@michaelshort7528]

I know I'm late but can you put a real steel rail system on the VFC?

[@rustam3572]

i think yes

[@lootingu]

what is that eotech lens protector!

[@MiddleAgeGameruk]

The lens protector is a flash kill from wadsn. They make them for most models. There only airsoft grade, but they do work. I got mine off eBay.

[@lootingu]

@@MiddleAgeGameruk i see, do the lines disrupt your sight or vision in any way?

[@chrisclayton2162]

I have a double eagle n4 and so far I’ve had to spend a few quid to get it to work first problem was the hop unit was constantly getting stuck had to change it then I had to buy a new bolt cause of issues I’ve had to buy 2 nozzles as they both broke and now I’ve had to replace the whole trigger assembly due to issues my opinion just buy a Tokyo mauri mws is going for the zet system don’t buy the DE version

[@aceace6001]

WHats the best one?

[@MiddleAgeGameruk]

Hi there, the mws system is great for people wanting to get into gas rifles. The vfc is more for people who favour realism. Both are amazing. It's down to the individual preference.

[@pyroromancer]

TM is in a paradoxical existence. They managed to patent the ZETA gbb system with the WTO but theyve been stuffing that system in products featuring unauthorized trademarks

[@nateb9346]

Cry about it

[@pyroromancer]

@@nateb9346 u mad bruh? **pokes with stick**

[@nateb9346]

@@pyroromancer I’m not mad about “unauthorized trade marks” lol. You seem to be tho. *Pokes with TM MWS with unlicensed trade marks just to piss you off*

[@pyroromancer]

@@nateb9346 u wot m8

[@zionthiem6343]

Lmaoo, this was fun to watch

[@Holanduzo]

Im sticking to my GHK M4.

[@opairsoft8100]

Feed lips instantly crack

[@battlecatairsoft]

🤣@@opairsoft8100

[@NeoMartel]

Everyone knows, Golden Eagle WA clone rifles are best :D

[@KikoBG12]

why?

[@NeoMartel]

@@KikoBG12 Price, aftermarket parts, potential for upgrades, compatibilites with GHK.

[@p90yoshi66]

False.

[@MrBruh-px2ct]

Nah VFC v3 for the win! ( TM MWS close second)

[@cortbrailey5116]

We all know that springers are the best come on

[@Jushi86]

TM stock Mags suck you need to mention that

[@codemy666]

wdym, they're great

[@Wolfman_NV]

Yea idk what this guy is talking about, all of my stock tm mags have been amazing, 4 years with countless 1000s of rounds and all I’ve ever had to do is clean and relube maybe once a year if they develop a leak and they’re good for another year of abuse

[@johnlam412]

10 ad in 20 mins wtf

[@MiddleAgeGameruk]

Apologies, KZbin is being broke again, I will see what I can do.