4WD POWER WHEELS FJ40 IS FINALLY COMPLETE!!/Pt7/Bodywork,Strip down,Paint And Rebuild + RIP Around!!

In this episode we finally get the 4wd fj40 power wheels finished and ready to RIP!! 4wd lever, rear bumper, new tyres, bodywork, winch install, strip down , final welding, painting, rebuild and test RIP!
massive shout out to grind hard plumbing co for massively inspiring this build!
thanks for watching please subscribe for more epic builds!
music provided by audio library and "loop chimp"

[@GrindHardPlumbingCo]

This is awesome killer job on this!

[@councilhousecreations8035]

Thanks a bunch man! Means the world! And Ya know... if ur ever in the neighbourhood 🤣🤘

[@Rider-lh2gz]

Grind Hard Plumbing Co you should ride your power wheels with council house creations

[@councilhousecreations8035]

@@Rider-lh2gz would be sick!

[@giants2581]

That is super sick bro good job

[@bikeking7149]

Love your vids

[@mikemfbellmann]

I cant believe I'm just now discovering your channel !... This is by far the best power wheels build I've seen on KZbin . The motivation, patience, and skill you have to fabricate every piece by hand with basic blows my mind. Hell of a job man much respect 👍

[@mattymccolgan9453]

Love that idea, tacking on the bits of tube front and back to rotate it on tressels

[@SuperGingerhunter]

I’ve never seen someone create something from scratch. Your use of an angle grinder, welder and lathe to make your Jeep is truly masterful. A homemade 4x4 system unbelievable. Looking forward to watching your other videos. Well done

[@councilhousecreations8035]

Thanks man that really means alot! Cant wait to get on with the next build! Take it easy man 🤘

[@gemininimeg]

I've come to the conclusion after binge watching your power wheels build. I defiantly can see how inspired you are by Grind Hard Plumbing and what a fantastic job you did. You earned a sub!

[@councilhousecreations8035]

Thanks man! I appreciate it!

[@garageadz]

I just re-did the exhaust on my power wheels, took the dirt bike muffler off and used a ninja 300 stock exhaust and although a bit heavy it actually muffles the exhaust and sounds absolutely fantastic. I paid 10 bucks for the muffler and it's a 35mm passage. The FJ looks great keep up the good work!

[@councilhousecreations8035]

Cheers bud! Yeah i think il be doing sumfin very similar very soon!! Was fun for about 30 seconds 🤣

[@devitaputriputripuput4606]

s😙😙😙😎🦄🐵🦄🐵🐵

[@LittleMikeStarCraft]

It is so cool to see so many of these builds on the internet, and it is awesome to see how differently people approach doing it.

[@councilhousecreations8035]

I know right! Its like a blank canvas to start again with the whole go kart theme! Hope to build a 4wd drift/rally car with crazy turning angle for that drift trike feeling!

[@slikballa]

The man upstairs has truly blessed you with some serious talent. Keep doing what your doing! Your a true artist !

[@councilhousecreations8035]

Thanks a bunch man i appreciate it! Years of toiling in the dirt finally payd off!

[@notpewdiepie6458]

Dude rocking mad welds without gloves...beast level 9000

[@councilhousecreations8035]

Cheers bud! 🤣👍

[@user-xr8dd4rz8c]

Потрясающая, фантастическая работа!

[@derekkennedy7346]

You should use one of them metal racing seats to have the flaps on the side that should cover them two bars up then you can put seatbelts on it too

[@toddfowler9863]

Who the hell thumbs down a hand built, working contraption that a grown adult can rip around on?!? Unreal

[@councilhousecreations8035]

Its ok bro! THEY CANT HANDLE IT!! 🤣

[@lawrencecarpenter638]

I love how u did the axles on that beast.No way there coming apart.The orange is off the hook

[@councilhousecreations8035]

Cheers bud! More metal is always the way! 🤣

[@steveo5174]

Wow man, I'm new to the channel but I'm absolutely blown away by your fabrication skills and ingenuity. That looks amazing and a lot of fun!

[@councilhousecreations8035]

Thanks a bunch man!

[@giovanipalo]

Eres un genio hermano! Sigue asi, al final deberías buscar inversores y hacer tu propia marca de mini coches, seguro que venderias! 👍👍👍

[@Need2Xplore]

just found your channel and i love what you have done, that looks amazing, for me i would prefer without the stinger, it removes the fj look a bit, but hey this is amazing and looks so much fun. congrats

[@rnl9520]

Sweet Build! You need to get your ride to Northern Idaho and do a run with the Grind Hard Plumbing boys!

[@councilhousecreations8035]

Thanks bro! Man if i had a boat!!!

[@andlinux]

When you drove in the grass I had a smile on my face. Well made !

[@councilhousecreations8035]

Thanks man!

[@TheDromen69]

What a cool power wheels, very interesting 4x4 system🤟🏿🤟🏿. A tube bendes would be a nice invest. 😜

[@jcmate1692]

Just love watching what other people are capable of. With enthusiasm like this guys got all he needs now is a well equipped workshop and there'd be no stopping him. skills are picked up along the way

[@councilhousecreations8035]

Thanks buddy! Cant wait for that day to come! 😂 take it easy man!

[@orangehigh0355]

Who else wants to see this at the grind hard place 🤘

[@councilhousecreations8035]

Well i sure do! 🤣

[@hmmmnz]

@@councilhousecreations8035 that'd be a pretty epic journey/boat trip then massive road trip.

[@Canadian_Craftsman]

Holy smokes brotha you're an amazing fabricator!! Almost over engineered this build seems to be very stout bombproof looking LOVE IT!!(=

[@councilhousecreations8035]

Thanks a bunch man! I appreciate it!

[@reidmorin7984]

Whistlin diesel should test it out

[@fredford7642]

Needless to say that I am repeating other comments, this is an awesome machine! It seems to far exceed the structure of other 4X4 machines. I have had Hondas and Kawasaki 4x4 vehicles but this seems to be much better and more powerful. Thank you for the great video!

[@jmanlinc]

I really appreciate the square tubing, I find it much more eye appealing than the round that most use for these builds

[@councilhousecreations8035]

Thanks bro! I wanted to prove that you domt need a fancy tube bender to achieve a good result!

[@gratefulRed69]

damn, that is one wicked machine! What an incredible build. Well done, sir.

[@councilhousecreations8035]

thanks very much man!

[@devdsp0]

I only just found your channel and the GHPC vibes were there through the whole build. I'm not at all surprised that they've got the top comment on this. The build is fantastic, the cinematography is up there with the best one person operations, and you've done the spit and polish most people run out of steam for. Outstanding work. I can totally see you on the next epic power wheels overland adventure.

[@councilhousecreations8035]

Thanks a lot man! I appreciate it! Ur right its taken alot effort so far but luckily i think im up for doin it again! Its a hell of a pay off when its sat there all shinny lookin! Thanks again man. Take care! 👍🤘

[@GuildOfCalamity]

This guy is a wizard. Would love to see more power wheels projects in the future.

[@chutzpah3921]

Thank you for making such a detailed video. Really helps with some of my own builds. Much appreciated!

[@councilhousecreations8035]

Thanks man! Glad u found it useful!

[@liampollard2908]

21:00 - re thew chain clearance - use a Renold Roll Ring - this will give you good chain tension AND clearance.

[@councilhousecreations8035]

cool! cheers bud!

[@VANMENBEND]

You good mehanic and blacksmith but whay is wehicle so small ????

[@councilhousecreations8035]

Cheers bud! Just for fun really.

[@jade_de_gracia5186]

i relly like how u made this thing bra i think it is better than the atv the run,bounce,accelleration,and it is really superb and amazing build u r a genius.

[@user-pv7qy7hn4s]

Good на испытании квадрика, - пёс радуется не меньше чем хозяин!

[@pablomax3045]

I am not sure which is more amazing.. this awesome build or the fact that someone in the UK built it without wearing 13 helmets and 27 high visibility safety jackets ;)

[@quevicular]

This is one of the best Power Wheels builds I've seen on the internet even over grind hard Plumbing. You need a MIG welder boy. So much Innovative fabrication. Very well done. You also need an HVLP spray gun. It will save so much time and wasted paint

[@councilhousecreations8035]

Thanks a bunch man! I appreciate it! I agree spray paint is not the way to go if you wanna save moneys! I hav a mig just keep running out of gas 🤣🤘

[@paulcherry1520]

Am I the only one gonna talk about that giant ramp in the middle of the field ??

[@mattfinlay7476]

Just binged watched the whole build. Awesome!! Love the 4x4 system. Think it deserves more power though! non the less, still dope af. Well done mate. This is definitely inspiration for people who want to do a power wheels build. I will definitely be doing one in the future!

[@councilhousecreations8035]

Thanks a bunch man! Glad to hear it! Cant wait to see more of these pop up! Good luck man!!

[@smedley6444]

Amazing what can be done with a little bit of imagination & a stick welder

[@SleeveOfWizzard]

"a grinder and paint, makes me the welder I ain't" - Jimmy Oaks

[@councilhousecreations8035]

Ay men brother!

[@jackrussel836]

Super , handwerklich Note 1 , Einfach , solide und günstiger wie die Originale , top

[@smitty_1]

I noticed how it always seems the friends only show up when the works done! I guess it's the same no matter which side of the pond your from. Lol. Sweet build, much thought and work here. You have some great talent and skill. Hats off to you my friend.

[@christopherizon1167]

this thing is unbelievable - you made building it look easy. The 4WD badge is an awesome touch

[@councilhousecreations8035]

Cheers man! Appreciate it!

[@IDoAgri]

Haha Love the orange, what a great build mate absolutely love the finished FJ40. Keep up the great work man

[@councilhousecreations8035]

Thanks man! Really appreciate it!

[@BenRelle]

Top stuff - looks awesome! Would you mind giving me wheel/tyre combo pls? I've got a build which will use the lawn tyres you started with, but would be nice to know what you went with as they look super cool.

[@councilhousecreations8035]

Thanks man! Yeah they really give it some stance dont they. They're ambush 18x10x8 tyres with 9.5x8 rims 110pcd.

[@chasemcmann5930]

This guy has serious fabrication skills .Imagine what he could build if he had a full pro machine shop to Work in. Awesome channel keep building

[@councilhousecreations8035]

Hey thanks man!

[@ninjadevin92gmail]

Amazing build. Just found you today and watched all your vids. love when people can fab anything they need, you have Defiantly given me some ideas for my old Power wheel that i want to go fix now Haha Keep up the great work and THANK YOU!

[@councilhousecreations8035]

No worries bud! And thanks you man! Take it easy bro! 🤘

[@andontully6450]

I just subscribed! What an awesome build this thing turned out great! I can’t wait to see you driving it around some more. Also just an idea some lights would be cool.

[@councilhousecreations8035]

Cheers bud! Yeah cud do with sum illumination. Hope to send it soon!

[@kirkengnath5501]

I feel sorry for the little chase dog that was doing a pretty good job following, but I bet that dog sleep's through the night no problem after chasing the guy driving his FJ40.

[@homemade_madness]

Awesome job man! As you might know i also built a 4wd mini buggy, i dont know where you are located, but really we should race them in some deep mud some day!

[@ronebakuwel5353]

HUGE WOW and big time kudos, to your workmanship! Your a true craftsman. Bravo. Looks like a lot of fun on 4 wheels!

[@councilhousecreations8035]

Thanks man! Took me a while but im well chuffed with the result! Hope the next one turns out as nice as this one!

[@brianhardy6084]

Just found your channel big fan of grind hard, cars and cameras, rather b welding, moto mule and hessick moto. Now I have a new channel to keep my eyes on. Keep building your in with the greats now. Would love to see a giant collaboration. I’m hitting the subscribe button right away. Awesome work 👍👍👍👍👍👍 I look forward to more cool stuff from your channel and I hope it a huge success.

[@councilhousecreations8035]

Thanks a bunch man! Would be a dream cme true to work with those guys. Lets c wat the future holds! Cheers bud!

[@durablecarpet]

Ditto! Your vid popped up on my feed and 30 seconds in I knew I would be subscribing!!! Props at build and it looks bombproof!

[@councilhousecreations8035]

@@durablecarpet thanks buddy! I appreciate it!

[@bikeking7149]

Same

[@tyler238]

Same here

[@anthiakelly3955]

You deserve so many more subs and views your build is on point with grind hard plumbing co ,cars and cameras, moto mule and rather b welding I hope your channel takes off and you can do heaps more builds Ps I love the mini digger that build is one of the best mini builds I've ever seen I'll be shareing your channel with friends that watch all the other guys do the mini builds to try and get you some more subs keep up the great work man I'll be waiting for the next one

[@councilhousecreations8035]

Wow! Thanks a bunch man really appreciate it! Hope to crack on with another build soon! Take it easy my friend! 🤘

[@luisinurriaga6523]

This little truck is amazing. I wish I could weld. Keep the great inventions.

[@donanders2110]

You just need to add bump stops to your suspension my man. I would think you could put some sort of "rub rail" for that chain touching that bar.

[@arthursmith5409]

Dude, this is one better than grind hard plum and rather be welding, that frame and fabbed panels is on point. Now will it rip out and travel the trails and jump hard? Nice maybe a Ducati 3 cylinder for the extra power to pull a hill. But the drive train and frame is on point.

[@councilhousecreations8035]

Thanks man! Yeah i over engineered everything so that when i can afford a powerful engine it shud be a easy swap! Ducati wud be sick!! 🤘

[@nacho_gamer1750]

Para completar los 1.000 comentarios

[@royogden549]

Fantastic piece of home engineering james cant wait to see your next project

[@councilhousecreations8035]

Thanks man! Currently hunting for new engines!!!

[@jarrodmcdaniel]

I bet that dog took a good nap on the way home from that field..good exercise lol

[@scottsilbs3169]

I tapped the like and subscribe buttons after I saw your efforts with the angle grinder cleaning up and prepping the frame, man, it came up a treat! Solid efforts!!

[@hockeychild7675]

i was watching a lot of grind hard vids and this got suggested

[@jammils38]

Dude that is sick as hell!

[@councilhousecreations8035]

Thanks bud!

[@mhrepoman]

I'm really impressed with how you designed the suspension system. I have built full size rock crawling rigs and I do a very similar style link setup as what you did on this. Very cool man. I'm also impressed with how you made your front drive system. Definitely not something I have seen before. I'm not building something this small, although I may in the future, but I am in the process of building a mini rock crawler with a full custom tube chassis. Its a single seat buggy that is running suzuki Samaria axles front and rear and running a three link up front and a triangulated 4 link in the rear. Running air shocks, no springs at all, and the suspension has so much droop that I have to run limit straps. Running 33" tires right now but I may step up to 35s and run a true bead lock wheel.

[@councilhousecreations8035]

Thanks man! Wow that sounds awsum bro! Id love to make a proper little crawler like that one day! Take care bud!

[@TaylorGrayson33]

need a skid plate in the front to protect the chain, axle and steering! great build!

[@diamondthomas7778]

Hard work pays off Yu need to click up with car's in camera 📸 💪💯🔥😯

[@councilhousecreations8035]

thanks a bunch man! like i told the other chap.. if i had a boat!!!!!

[@joeybryan5728]

looks sick with the new tires ove it (sorry for bad eglish im from the netherlands)

[@councilhousecreations8035]

no worries thank you buddy! your english is better than mine ;-)

[@macparise9215]

This dudes editor has made this project satisfying to watch. Love this kind of content

[@councilhousecreations8035]

thanks man! i do both! build and edit! just inspired by my favorite channels thats all. hope to be like the pro's one day tho!

[@helmesnick79]

This is an amazing build. Thank you sharing. From Red deer Alberta Canada

[@councilhousecreations8035]

Thanks a bunch man! Take care!

[@technerdy]

Yoooo let’s get this kind of building over at Cars and Cameras lol

[@councilhousecreations8035]

That wud be something! 🤣

[@joeydavenport7908]

Hey now don't knock C&C, I've been watching them for years and they have come a LONG way. They are fun to watch too!! :)

[@councilhousecreations8035]

@@joeydavenport7908 il giv ya that bro!! They're on my list of channels to follow like a religion! 🤣 im dying to see their power wheels bronco up and running! Shud be a ripper!!

[@joeydavenport7908]

@@councilhousecreations8035 They finally got back to working on it, kinda like how they are coming up with the AWD/ 4x4 set up. Not sure how good it's going to hold up but the idea is solid.

[@christophermorin9036]

"Everything that's gonna be orange is now orange." Including your tools, welder and table lol.

[@councilhousecreations8035]

Looked like mars in there! 🤣

[@tanioraaura1274]

Barbi Q outing. Eating a pkt of orange cheezels one afternoon . I took ae outdoor leak standing there Shake and a hour later take another leak un- - - zipping -f c u k- The orange food colour was everwhere Dry looking orange stain. What a mess. Joe bob would be the perfect orange remover.

[@viggojensen774]

GENIAL!!! GENIO!!! Gracias por compartir 👍

[@paulflor198]

Coolest little beast I've seen in a while! Awesome!! Wish I had your talent to just make things!

[@councilhousecreations8035]

Thanks a bunch man!

[@its_me_voltron6394]

He'll of a job man👍

[@councilhousecreations8035]

Thanks buddy!

[@trashtotransportations5857]

Cool

[@councilhousecreations8035]

Cheers bud!

[@bisket2003]

Just found your video based on the cover photo. Fukkin sic build son! The Grindhard Boys would absolutely dig this! I gotta find your video on how the 4WD system was built now.

[@fedupamerican130]

Nice work! As spunky as it seemed have you thought of a roll bar above the seat? Perhaps a lap belt as well? Rock on, looks like a well thought out and fabricated project. Congrats on the end product. Have fun

[@kravanamjesecu]

Roll cage would be a must for this!

[@user-mx9yq1zl7k]

Молодцы ребята, я ничего не понимаю что они говорят, но смотрю и ахуеваю что делают

[@CoyoteCari]

put a turbo hayabusa motor in it then she'll rip

[@councilhousecreations8035]

Lol! I think with how heavy it turned out that might be my only option!! 🤣

[@almirlima860]

Parabéns pelo projeto muito top😮👏👏👍

[@ejayd4293]

Man I had to subscribe just out of appreciation for the hard work you put into your builds....mostly hand tools and by yourself....truly amazing work!!!...I will share this with all my friends...

[@councilhousecreations8035]

Thanks man I appreciate that!

[@donaldboyce7110]

He forgot the roll cage

[@councilhousecreations8035]

Yeah yeah yeah forgot! 😉

[@fonhollohan2908]

I love the four wheel drive mechanical set up its brilliant idea the only way to have it. Well I know one thing you never have to take your dog for another walk that's for sure. Once you work out all its kinks she should be a very reliable little rig.

[@brittneygraham352]

I was a big fan of the little 4x4 you made, but then I seen the xj and became even more of a fan! I've got an xj as well.

[@councilhousecreations8035]

Thanks man! Wooo! Xj all the way man!! Shes got 275000 miles on the clock and flew through its MOT yesterday! Best car i ever owned!

[@prancstaman]

Awesome build! Love the 4 wheel drive setup.

[@councilhousecreations8035]

Thanks a bunch man!

[@ParaDIYgmCrafter]

this is absolutely amazing

[@MrGiXxEr]

WE NEED MOAR! I'm digging your style, man. A true fabricator and it shows. Your video style is also very enjoyable to watch!

[@jeffhy3931]

Very very cool- excellent build. Lots of great ideas and design work and you are a master with a grinder and stick welder. Well done 👍

[@councilhousecreations8035]

Thanks man!! 👍

[@LatinDanceVideos]

Nice work. Some serious engineering there

[@councilhousecreations8035]

Thanks a bunch man!!

[@darrenhobson2244]

This is what you get when brains and machinery come together. Spot on mate👍

[@dyingforpie6879]

I watch all the build videos they speak to my soul- this one screams! Awesome job. One thing- the music made me think of a yoga video🤣

[@chasebridges8905]

super cool gokart

[@robertb6120]

I have a idea put rubber stops to keep it from bottoming out you can git them off a used auto that way it will save you from hitting your coolant lines .

[@councilhousecreations8035]

Thanks man! Yeah i think its the way forward!

[@wproctor461]

Really cool build!! I love home built ingenuity!!

[@robertford3530]

Solo though, no help, = extra level of skill, mad props!!!

[@troyhermitage722]

weld yourself some bump stops in , you can buy the rubbers. brilliant build and showing that the uk are in on this power wheels

[@councilhousecreations8035]

Cheers bud! I reckon ur right!

[@AddictedToOctane]

Hey bud, that’s and amazing machine… very impressive.. can I ask what axles you used, or what did you have to do to build the axles

[@davidawaters]

Nice! I’d get a piece of UHMW plastic for the chain where it is touching. dirt bikes have something similar.

[@AnotherCafeRacerBuild]

I watched your video for 30 seconds and can tell you have incredible skills. 👍

[@paariraaju9688]

Wonderful fabrication!!

[@councilhousecreations8035]

Thanks buddy!

[@eformance]

You might want to get some PTO shaft u-joints for the front, they are compact and can transfer a lot of power, while having very good clearance during misalignment.

[@councilhousecreations8035]

Cheers bud! Its not so much the clearance thats the issue. Its more the ''phasing'' or difference in speed of the output shaft for every 90degree rotation. Might chuck sum cv joints a t it in the future. Will be interesting to see how it lasts ya know for testing purposes!

[@eformance]

@@councilhousecreations8035 you could do a double cardan joint to cancel out the phase errors.

[@lacystarr9907]

That would be sweet powder coated. I know that would also be costly lol!

[@DrFelch]

Cool. 4WD version of Senderella. Very nice work. Looks about as good as Ethan's stuff, too!

[@councilhousecreations8035]

Wow! Cheers bud!

[@percylewis7692]

Man!!! That is what I call BAD ASS! thats creativity at its finest. Can I purchase 1 please

[@boccacantiga5095]

Amazing work mate, i know i said it last time but that square tube frame is brutal and i love it! Keep it up, im subbed in for more builds!!

[@councilhousecreations8035]

cheers bud! thanks for the sub! it turned out pretty well! im gunna try and keep em coming!!!