5.9 CUMMINS FUEL FILTER DELETE

Shop: www.darkirondi...
Instagram @darkirondiesel
Please like and subscribe!
Thanks for watching!
MY GEAR
GoPro: amzn.to/3mGCh7t
Tripod: amzn.to/3iPtcHk
Camera: amzn.to/3cf8lum
Mic: amzn.to/33PqcnQ
Drone: amzn.to/2ZWfj2v
Gimbal: amzn.to/3hP8Mg0
MY TOOLS
1/2" torque wrench: amzn.to/2FD3He4
3/8" torque wrench: amzn.to/2RNi3KY
1/2" impact: amzn.to/32OVUSQ
3/8" impact: amzn.to/32PrUqi
Drill and Driver: amzn.to/3kMgv0D

[@alandillon6469]

Thanks for showing this man, what I'll be doing to mine

[@giogiacalone1492]

I installed the Bean Sump. It is just a different of opinions on whether it is better or not.

[@MKSPerformanceOffroad]

Good video, delete blocks free up so much space and work well. Fleece products are great quality.

[@meldeer6253]

Ok great idear but your 5.9 is a 3rd gen correct i got a 2nd gen my big question is Heater how well dose the truck start with no heater in the filter ?? i did the same kit to the fuel tank it was a pain in the ass but a lot easer that a gassser ... that fuel filter is a pile of cow dung freeking thing leaks all the time air blead.. thanks for the video

[@_astralxinfluenced_2799]

Hey bud, did you have a "stretch" issue with the WIF sensor wire harness? I installed mine & the wires don't wanna reach, it'll plug in, but there's way too much tension/strain on the wires for my liking so I unplugged it. 05 Ram 2500, & no, no codes popped up for not having the OE WIF sensor & fuel heater plugged in.

[@BiggusDickus2]

Yeet it. It's not doing anything

[@chrisallen3741]

You have an 03, when was it manufactured…mine says April of 03 and i dont have the same ignition…i guess. I’m not sure

[@Kevcandoit]

what did you do with the factory supply line from the tank to the stock fuel bowl? did you leave it in place or pull it out? just finished up my airdog II instal and i was about to do the fuel bowl delete.

[@_astralxinfluenced_2799]

Pull it out, adds horsepower.

[@snyderkurtis]

So do you need to delete the housing for any other reason than looks? I got bad injectors so I think I’m gonna do a fass for the filtration to prevent the new set from going

[@darkirondiesel]

Well if you keep your factory fuel filter you still have to change it, so why not just get rid of it ya know? Instead of wasting your money on filters you don’t need

[@snyderkurtis]

@@darkirondiesel wouldn’t the fuel only be returning through ports in the back of it instead of going where the canister went

[@b.tylergrant5334]

Would you mind telling me what that specific blue paint is ? Also what size lift

[@tonynewsomjr.4043]

Pretty sure you get better fuel flow if u have a fass and fuel filter delete. Unless if you just want a 3 filter system then keep the stock filter but really think the flow is better without it

[@austinstowell2656]

What Fass system did you go with? The TS DO8 165gph?

[@Pawildsbigfootedition]

Thanks for this video great explanation!

[@MultiAndres66]

Did you get any code after installing fass and fleece filter delete ? I got p0628 after I did that.

[@broskis80]

Also what about that sensor on top of the fuel filter housing side? Some say it is fuel heater... then there is small fuel pump at the other side. So you end up with 2 plugs disconnected? Does that generated any fault codes ? Then again you got rid of in tank lift pump but I understand again pump wiring even not connected not generating fault codes ?

[@darkirondiesel]

Hey no as far as I know it won’t generate any fault codes

[@camerinsmith5182]

Any more details on how you piped into the top of your fuel tank for the lift pump?

[@_astralxinfluenced_2799]

Just installed a FASS, what'd you wanna know?

[@dominicdiangelis1872]

What did you do with your factory fuel heater? (The other plug on the fuel filter housing)

[@Euroboyz]

Hey did you ever figure this out? Please respond lo

[@BiggusDickus2]

Yeet

[@Hashmaster710]

@@Euroboyzim trying to figure it out aswell

[@ericnielsen7424]

Why a fass and not an airdog?

[@tonynewsomjr.4043]

I have a fass pump and I just did this fleece filter delete and now I have a hose with a banjo bolt that doesn't go to anything that is leaking fuel. Does it go anywhere or should I plug it off ?

[@darkirondiesel]

Where is the hose? Which hose is it?

[@tonynewsomjr.4043]

@@darkirondiesel it's a hose with a banjo bolt that came off of the stock filter. Looks like it goes back to the tank. It's just hanging there after I did the fleece filter delete and sometimes fuel comes out of it

[@darkirondiesel]

The factory fuel line that fed the fuel filter from the fuel tank? I just folded it over to kink it and zip tied it on the frame. It’s still connected to the sending unit on the top of the fuel tank but when I installed the fass I removed the fuel lines in the sending unit that actually brought the fuel up to the top of the sending unit.

[@baps1137]

How does your Fass work in these Sask temperature changes?

[@ssceverythingcummins2985]

just did the fass and the fleece filter delete now i got a damn no start did you have to crack any injector lines i opened three the easy ones to get to but just me in the shop so i could only crank then go close them its a damn bugger !did yours just fire right up i figured this would happen so i was surprised yours just fired right up

[@darkirondiesel]

If you crack injector lines and crank until there’s fuel there, then tighten them up it should fire up no problem. Did you figure it out? Maybe you have the feed and return line mixed up on the fass

[@ssceverythingcummins2985]

@@darkirondiesel Hey man thanks for the reply ! Stupidest thing I just over looked , like you i never removed my intake horn . So without noticing i guess i bumped my emergency shut off valve seen that today opened it dah ! fired right up .. Good vid aswell man cheers

[@broskis80]

What's the kit for the turbo? VGT you means brand or VGT type instead of WG ? Any more details on that ?

[@darkirondiesel]

It’s the BD Diesel Howler kit

[@dillonsharpe1574]

I would like to know too why not the bd pump

[@knobby7540]

What kit was for in the tank

[@vanntownsend9544]

What’d you do with the line that had the quick connect on it?

[@darkirondiesel]

The factory fuel line that fed the fuel filter from the fuel tank? I just folded it over to kink it and zip tied it on the frame. It’s still connected to the sending unit on the top of the fuel tank but when I installed the fass I removed the fuel lines in the sending unit that actually brought the fuel up to the top of the sending unit.

[@vanntownsend9544]

@@darkirondiesel alright thanks

[@PoliticalGangster]

Lift pump is a filter and aids the fuel pump. It is not a fuel pump replacement. Am I right?

[@darkirondiesel]

No you are wrong. A FASS or Airdog fuel pump replaces the factory fuel pump. Duramax engines don’t even have a lift pump from factory.

[@PoliticalGangster]

@@darkirondiesel got it. Thanks.

[@darkirondiesel]

No problem buddy

[@PoliticalGangster]

I think I'm confuse. Is this a lift pump installation or a fuel filter replacement?

[@darkirondiesel]

I installed an aftermarket lift pump which has 2 filters built in, so I no longer needed the factory fuel filter, so I got rid of it.

[@PoliticalGangster]

@@darkirondiesel So the aftermarket lift pump that you install serves both as a fuel pump and fuel filter?

[@darkirondiesel]

Yup you bet. It’s a fass fuel system. Air dog is also another common one people use.

[@arnejahr3531]

Great video

[@darkirondiesel]

Thank you boss!

[@johncouture6896]

Did you delete the tps sensor and all that

[@darkirondiesel]

TPS sensor? Throttle position sensor? Tire pressure sensor? What do you mean?

[@johncouture6896]

@@darkirondiesel throttle position sensor with the cable and all or did your truck not come with it either because I have no idea where mine tps/ apps sensor is

[@CPSteveMiller]

36th