5 Axis Machining: Air Baffle l GF | Fraisa | hyperMILL

This video shows the machining process of an air baffle made on a GF Mikron Mill P800 U using Fraisa cutting tools. Completely programmed with hyperMILL and it’s performance package hyperMILL MAXX Machining.
Material: 1.2738
Machine: GF Mikron Mill P800 U
Cutting Tools: Fraisa
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
For more information about hyperMILL, visit: www.openmind-te...
For more information about Fraisa tools visit: www.fraisa.com...
For more information about GF visit: www.gfms.com/c...
SUBSCRIBE ► / camopenm. .
FACEBOOK ► / cam.software. .
INSTAGRAM ► / hypermill
TWITTER ► Op...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

[@mustaphaaitkhouyaali430]

Guys hyper mill , more advantage than cam works? Or esprit cam

[@ivanvazquez7465]

Is that an actual part or demo?

[@iRaised95]

What kind of function you’re using for 5 axis deburring with chamfer mill?

[@OPENMIND-Technologies]

5-axis contouring was used for deburring there.

[@iRaised95]

@@OPENMIND-Technologies 5 axis Contouring doesn't allow chamfer mills, so i assume you guys used and endmill and used a free tip geometry to make a chamfer mill. I Hope you guys in the Future come out with a multi axis deburr, would be very handy. Any plans for something like that in the future or is there any onlineBox we can send suggestions?

[@OPENMIND-Technologies]

Thanks for your message. Yes, we used free tip geometry here. We know that multi axis deburring is important to many - so stay tuned. ;-) If you have suggestions you can send a mail to [e-mail].@@iRaised95

[@Hanal503]

​​​@@iRaised95end mill...taper! But We have edge breaking for..5X chamfer and radius.You may use chamfer tool or ball nose.

[@prashantpanchal6930]

Fantastic ..

[@henrikforsberg683]

Amazing! 👍

[@андрюхаджиксерюха]

охренено👍