5 Day Wait For Suppressor - CGS SCI SIX / Spectre 9

Рет қаралды 3,030

Kimchi Cowboy

Күн бұрын

Пікірлер: 76

@ryanv1162 3 ай бұрын

the ported front end cap helps huge with gas blowback- love your video btw i appreciate you posting

@kimchicowboy5053 3 ай бұрын

@@ryanv1162 thanks man! Good to hear.

@brianarevalos 2 ай бұрын

Good job Cowboy. My ScI Six with my Thunderbeast Dominus SR both got approved today! 🇺🇸🇺🇸

@kimchicowboy5053 2 ай бұрын

@@brianarevalos Congrats man. That’s awesome.

@Spudinske 3 ай бұрын

KAK's Downward Venting BCGs could be something to look into. Not sure how it stacks up against the bootleg tho

@kimchicowboy5053 3 ай бұрын

@@Spudinske will look into that as well. So far just have the ported end cap coming.

@ehornad Ай бұрын

I have kak, drops port pop to piston gun levels

@ericl5973 24 күн бұрын

Spectre 9 for a 2 stamp PCC is my ideal setup. If only it could be ordered for a discount without the booster.

@Josh-ly9mi 4 ай бұрын

@3:20 watch the ejection location. 1-2 o'clock at best = over gassed. Ideally ejection is at 3 o'clock. I would recommend an adjustable gas block and a different buffer weight. Also, CGS sells a ported front end cap for this can. Significant gas blow back reduction with minimal increase in sound. Might be worth checking out. It's only a hundred bucks and you don't need to touch the gun.

@kimchicowboy5053 4 ай бұрын

Yea looking at the Bootleg BCG and the front end cap. Thanks for the info!

@rytacarms 25 күн бұрын

go ahead and get the ported end cap. its not super flow through like the huxwrk but does the job on shorter guns

@ehornad Ай бұрын

I have spectre 9, very high back pressure compared to osprey, omega, and octane. I'm testing 16lb recoil spring to help with gas. Works with nato ammo, still need to try with subs

@kimchicowboy5053 4 ай бұрын

Funny enough Milspec mojo just posted a video about the Bootleg BCG, will need to check that out. Anyone run on?

@deebee3174 3 ай бұрын

I have them. They work. Been using them since 2019.

@kimchicowboy5053 3 ай бұрын

@@deebee3174 good to know. Thanks.

@trunkmonkey56 3 ай бұрын

Yep I have a couple, and it is a great option if you want to keep your pinned gas block. Definitely makes a difference. Had mine for years.

@emanTX96 3 ай бұрын

I run one on an 11.3” with a polonium k. it does excellent to correct overgas. but I did notice my cam pin is wearing the edge of the clearance pocket on the inside of my upper receiver after a few hundred rounds. It did this on both this upper and my 300blackout. I think that a black river tactical gas tube is likely a better solution than the bootleg because the bootleg bolt’s gas venting will still make your gun dirty

@chicwboost 19 күн бұрын

Shouldn't need a booster for the beretta since they are not browning style camming barrels. I don't own one but from what I understand it is ill advised cause the booster is jack hammering it's self in a straight line.

@kimchicowboy5053 19 күн бұрын

@@chicwboost I’ve talked to Capitol Armory and they recommended one.

@makevelicustoms 4 ай бұрын

Great vid 💪🏻 what camera did you film with bro?

@kimchicowboy5053 4 ай бұрын

Appreciate it! Sony a6300. I use a sigma 16mm fixed or a Sony 55mm fixed lens.

@makevelicustoms 4 ай бұрын

@@kimchicowboy5053 cool thanks you have some pretty cool vids, keep,up the great vids and be safe 🤝🏻

@kimchicowboy5053 4 ай бұрын

@@makevelicustoms thanks man!

@gabrielpark8910 15 күн бұрын

i literally just want to know if it will run direct thread on a beretta

@kimchicowboy5053 15 күн бұрын

@@gabrielpark8910 when I picked it up from capital armory they recommended a booster to run it.

@TheOccasionalGunTuber 3 ай бұрын

Please get a direct thread mount for that Beretta and let us know if it works. My Spectre is in jail or I would try it myself.

@kimchicowboy5053 3 ай бұрын

@@TheOccasionalGunTuber I’m assuming it woild

@uncledagger 2 ай бұрын

Great video. Subbed! If you like your rifle, I would suggest looking at Riflespeed AGB's. They have enough granular adjustment to allow you to tune the rifle to the can and even the specific round that you feed it. If you want to get a dedicated rifle for suppressed use, take a look at Primary Weapons Systems. You would be going from DI to a long stroke piston system but my PWS runs clean and is definitely less gassy than my DI AR. Only downsides are price and weight since they are a little heavier than their Direct Impingement brothers. Unless you're using a flow through design, it's gonna be gassy but tuning does help. Congrats on the quick turnaround on your form 4!

@kimchicowboy5053 2 ай бұрын

Great info! Thanks man.

@cleanlikegator2725 4 ай бұрын

I have the Sci-Six and I changed out the front cap and it really helped with the blow back

@kimchicowboy5053 4 ай бұрын

Sounds like I need to snag one. Thanks!

@cleanlikegator2725 4 ай бұрын

@@kimchicowboy5053 when you get it make an update video on your thoughts!

@kimchicowboy5053 4 ай бұрын

@@cleanlikegator2725 will do!

@Tangy6 3 ай бұрын

I got the ported end cap but haven’t put it on due to how difficult it is to get the factory one off. How did you get yours off?

@kimchicowboy5053 3 ай бұрын

@@Tangy6 once I get mine I’ll make a video! Still waiting for it.

@freddiedash1653 4 ай бұрын

Nice video brother. Really interested in the spectra 9 not much out there on them yet. I was just looking up info was that can a flow design ? I initially was looking at the Omega9 k and Bauer p 9 mm cans no I’m undecided. It probably dedicated to a subgun Or occasionally on a pistol I’m new also to suppressing so all information I can get will aid in decision.

@kimchicowboy5053 4 ай бұрын

You can always call Capitol Armory and talk to someone there. It’s great being able to go in as they have all of the suppressors in a case that you can see, hold etc. they’re very knowledgeable and can help you decide. I went with the Spectre because it was so much smaller of a profile and much lighter as well than the Omega9k which was originally my first option.

@freddiedash1653 4 ай бұрын

@@kimchicowboy5053 my lgs has some suppressors in stock I might try them to see what he has. Definitely will call capital to see what they suggest after a talk with them to see what they say. Thanks again

@ItsBiscoitoIndeed 3 ай бұрын

I thought you don't need a booster for the spectre because it's so light?

@kimchicowboy5053 3 ай бұрын

@@ItsBiscoitoIndeed it’s light, but it’s not that light. Still can tell it’s on the end, especially on a pistol.

@KeekTheUnique 2 ай бұрын

Be careful shooting even with suppressed, maybe if you had subsonic ammo, you could be fine, but standard super-sonic is a little dangerous to your hearing, I am sure for the short time you did it, you were fine. Solid video!

@kimchicowboy5053 2 ай бұрын

@@KeekTheUnique I rarely shoot without ears. If anything a mag or so. Always outdoors too.

@AndrewTPewPew 4 ай бұрын

Just snagged a Spectre9 on an impulse buy so fingers crossed for another 2/3 day clearing!

@kimchicowboy5053 4 ай бұрын

Fingers crossed for you!

@kimchicowboy5053 3 ай бұрын

Get the suppressor yet?!

@AndrewTPewPew 3 ай бұрын

Funny enough certifying it today! Last 3 cans have been 2-3 days to clear hoping for the same! Also, turns out there is cross compatibility with the rugged obsidian mounts thankfully.

@kimchicowboy5053 3 ай бұрын

@@AndrewTPewPew awesome

@jrstar805 4 ай бұрын

So friggin tight my dude! Nice!

@kimchicowboy5053 4 ай бұрын

Appreciate it!

@troychild 4 ай бұрын

9mm cans are pointless for pistols, unless it’s just for fun and to impress people. However, they are awesome for PCC’s. MP5’s with this can will be amazing.

@kimchicowboy5053 4 ай бұрын

@@troychild yea, it’s practical for a bedside grab. But a sub gun or 300 is needed for the Spectre 100%.

@AlmightyRodga 28 күн бұрын

I’m on day 19 waiting for my suppressor.. Starting to get impatient 😅

@dryfly1999 4 ай бұрын

Dude… it’s never hot to go to the range!

@kimchicowboy5053 4 ай бұрын

You’ll be pleased then I’m going next Sunday. It’s peak summertime here almost and can only last so long in 100 degree heat lol

@mattloy1744 3 ай бұрын

What tool kit is that!?

@kimchicowboy5053 3 ай бұрын

It’s just a big bit kit from Home Depot.

@mattloy1744 3 ай бұрын

@@kimchicowboy5053 thanks looking for one for my workbench 👍🏻

@Echo_6-9 4 ай бұрын

Some things you can do to reduce gas blowback Raidworx Mach 15 charging handle Riflespeed adjustable gas block or Bootleg BCG CGS vented front cap

@kimchicowboy5053 4 ай бұрын

Will look into the charging handle. Thanks! Heard with the front cap the sound increases, curious by how much.

@Echo_6-9 4 ай бұрын

@@kimchicowboy5053 ANR Design has a KZbin video comparing the normal front cap vs the vented front cap. I personally haven’t used it but I can’t imagine it’s noticeably much louder if you’re wearing ear pro anyway and shooting mostly outside.