5 lug to 6 lug Wheel Adapters - HOW TO INSTALL - Do They Work

[@theophilusone7]

Leaf spring shackle will pick that right up! 40 dollar fix. Great work 👏

[@TattsForLife]

Thanks for watching

[@D1G1TALSYNAPS3]

Thanks for the information in the Allen bolts. Seems low 55 ft/lb but it is steel to aluminum. Thank you.

[@TattsForLife]

Welcome

[@BushWookie603]

Reminds me of a 19 year old in his dads Cummins from 99, with 20 inch offsets

[@dol_sste12]

Where Website bro I want order

[@TattsForLife]

This set was bought used off of ebay, I dont have their website, but I do have better videos of the adapters uploaded on my channel

[@cmorales228]

Elmer fudd making car videos got tired of chasing bugs bunny

[@TattsForLife]

🤣

[@marqueeoakley3778]

I didn’t hear it at first…but now I can’t un-hear it now😂😂😂😂😂😂😂😂😂

[@Pistol148]

"Shhh. Be vewy vewy quiet, I'm hunting wabbits"

[@jerrybersamina]

How is it driving in the highway? And steering vibration?

[@TattsForLife]

None when we was driving it

[@randelclemons5798]

Thank you for the video. 👍🏽

[@TattsForLife]

Glad it was helpful!

[@captaingti]

hey can i get an update on how this is going? i am looking to put these on my truck. thank you

[@TattsForLife]

Still working fine, drive the suv daily no issues yet

[@pmp2559]

I have 6 lugs but mines a Dakota there’s no good picks for wheels

[@TattsForLife]

and wheels can make a ride, I hate not being able to pick nice wheels due to a bolt pattern

[@broeheemed32]

@@TattsForLife - Yes, like the hyper-stupid 5X135 on the early 2000's F-150...... the best selling truck in the country. Ford engineers must have been on acid or post-partuming or something. There are almost NO aftermarket wheels for this pattern. Curse you, Ford.

[@mobius012]

How much do they stick out?

[@TattsForLife]

I say around 6 inch, give or take

[@CooperKnight-y7j]

Anybody know where I can get them same Allen bolts on the adapters. I’m rebuilding my suspension and stripped a couple with how rusty they got

[@CooperKnight-y7j]

I’m thinking I might as well just get another set of adapters but my pockets already hurting if anybody could help me out🤣

[@pimpperuvian]

Would you say it safe to use on a day-to-day basis not necessarily for off-roading

[@TattsForLife]

No, I don't think wheel spacers are safe, but higher quality ones seem to hold up, sometimes they no other options for a certain style rim in a certain lug pattern so people use spacers

[@k1500peso]

What’s the link to the spacers

[@johnnylong2049]

How’s it holding up?

[@TattsForLife]

We changed the rear-end to a 6 lug and traded the suv off a few months ago, last time I seen it the adapters was still holding up on the front

[@risablima7924]

Is it safe

[@TattsForLife]

Off road use only they say

[@jayzee1271]

Hi. What website did you get those at?

[@TattsForLife]

Found them used on eBay, but I found a few sets on a few different sites using that part number off the mounts

[@victorbeltran5866]

Is it safe for long travels after putting those?

[@TattsForLife]

I hope so lol 😆 😅 We been on some long road trips and even pulled a few cars with them installed

[@victorbeltran5866]

@@TattsForLife thank you for the reply man, been indecisive about them

[@TattsForLife]

this set if working good, the small bolts tend to round off if over tighten and that makes them a pain to take on and off if you need to replace brakes

[@JoseDiaz-nl3ww]

Got a link for the adaptor kit 🙏

[@TattsForLife]

sorry, I do not

[@twc20031985]

I don't have that much faith in those little allen head bolts. The sheer strength of those bolts wouldn't survive one pothole. The rim isn't being supported by the center bore or anything, just those 6 tiny bolts.

[@TattsForLife]

In ky they hit a pot hole every few feet lol, but I agree with you I would not do anything like tow or go off road with the spacers, I ended up swaping the rearend to a factory 6 lug one

[@dontahawkins54]

How do I remove those Allen screws? It's tough to do so... impact strips them and to much elbow grease tends to strip em also or not even budge them

[@eissaaldossary5628]

Who can buy this part, especially for 1985 Chevrolet c10 ????

[@robertstembridgejr7532]

I don’t like this idea! Does anybody do this the correct way…swapping out the rear end and front rotors for 6 lug?

[@TattsForLife]

I do lol we done swapped the rearend to 6 lug

[@5.7-Jacob]

Isn’t hard get a rear drop yours out throw the new one in when you get the front hubs get the 2500 light duty hubs they are interchangeable

[@stevepage992]

Just change the axle much safer

[@TattsForLife]

@stevepage992 agreed

[@oscardiaz7025]

@@TattsForLifemore money jaja

[@TheCoyote62]

Elmer fud ? Lol

[@TattsForLife]

😅

[@jeffdavis7990]

This is awful and very dangerous.

[@TattsForLife]

I agree, wheel spacers can be dangerous, why you always got to keep a check on your wheel spacers, and why most all wheel spacers are off road use only