5 Shop Hacks #3

5 Shop Hacks - Shop hacks, workshop tricks, tips... Whatever you call them, they help you save time, money and effort, I introduce you to 5 hacks that I use regularly, that I find most people I talk to, don't know about. These shop hacks make my life easier in my shop, and i'm hoping that implementing these hack, might make your day go a little easier!
🔔 Subscribe to this channel:
/ burkemakesstuff
Music by : AmpleTunes.com
---Stuff I used to make this video--
Camera: Nikon D5200
Lens: Nikon AF-S Micro NIKKOR 60mm f/2.8G ED
Lens: Nikon AF-S DX NIKKOR 18-105mm f/3.5-5.6G ED VR
Editing software: Filmora9
Get Filmora 9 here! ➜ filmora.wondershare.com/

[@captainprincess5943]

OMG! The measuring trick! You are a flipping genius! ...I do NOT math. We are kindred spirits in that arena! 😊

[@BurkeMakesStuff]

It’s one of my all time favorites!

[@The_Devil_Nside]

No one pointed out the. . . Wiggle room for when you put wood in it. Lol awesome video

[@BurkeMakesStuff]

Glad you enjoyed it!

[@UDoIt2]

Great video! That combination square on the mitersaw is dah siht!!!

[@BurkeMakesStuff]

Glad you enjoyed it!

[@lourias]

The epoxy mix on tape is great! You can leave that epoxied tape out as a "TEST" to see when the epoxy has set.

[@BurkeMakesStuff]

Been using it for years. Easy setup. Easy cleanup. Contained. Love it

[@DaemnNoctus]

I had the same sort of issue with utility knives tik I found the one that works for me. I like the classic stanley 10-189c type knives. I stopped breaking blades constantly.

[@HepauDK]

If you use the combination square to position the stop block on the mitre saw, remember to take the carbide tips into account. The carbide tips are a tiny bit wider than the body of the blade. Well, if precision matters. It does to me (occupational hazard from when I was a fitter)...

[@BurkeMakesStuff]

Absolutely!

[@AndyCPugh]

Great tips.

[@BurkeMakesStuff]

Thank you! If you enjoyed them, consider sharing them with someone else that might, as well.

[@Rusty_ok]

The corner clamp is great idea.

[@BurkeMakesStuff]

Thank you! Just couldn’t bring myself to waste $32!

[@ScottKraft]

Nice! I mix epoxy on a silicone coaster. Nothing sticks to silicone (for the most part). Just wait for the excess to dry and pull it off.

[@BurkeMakesStuff]

Scott Kraft SILICONE! Brilliant!

[@cozimfrench]

'if you like me', I do like you x

[@TheTaemobig]

Makers playground sent me here! Awesome channel!congrats on the 18k milestone!

[@dexterbutler9735]

Thanks. You just saved over $100 on corner clamps.

[@BurkeMakesStuff]

True

[@ricardoantonioperez61]

Genius

[@BurkeMakesStuff]

My wife would probably disagree! 😂

[@drewpickard554]

I disagree with the tape for 2 part epoxy. Like I do think it works, but sorta begging to spill over. I keep super cheap paper plates out in the garage for things like that. The major benefit of that is I can get really close to where I'm applying it. The rest of the tips were all pretty good though

[@BurkeMakesStuff]

To each their own! I’m glad you enjoyed the rest!

[@roni2671]

Life hack old plastic box under that finn and big magnet then you can keep your bolt srews ect in it and you have lid for it so you can closeit

[@BurkeMakesStuff]

Love it!

[@tazman4741]

Know if you look on Amazon they have the nice the are pencils now I have a latil One and I love it in it's a lead

[@learemington1700]

Mixing epoxies: use the bottom of an aluminum drink can.

[@BurkeMakesStuff]

Ummmm.....this comment just blew my mind. That’s PERFECT! and I have a ton! Thank you!

[@Everfalling]

they make break-off blade utility knives

[@BurkeMakesStuff]

Everfalling I find that they break off WAY too easily when I’m putting them through their paces. I stick with the solid blades

[@tazman4741]

Are you still use a breakaway Le tality knife to make marks

[@BurkeMakesStuff]

Looking for a good marking knife. Any suggestions?

[@tazman4741]

Are you sleep go to lowes or Or a menards I get a perpetuae knife's they are or I buy a latil ity knife the new is Stanley Your slave you can get a big pack for Stanley

[@BurkeMakesStuff]

taz man I’ll check them out! Thanks for the heads up! I appreciate it. Always looking to learn more!

[@tazman4741]

Try Harbor free that's where I get mine from or Walmart they're like penny cheap

[@BurkeMakesStuff]

taz man thanks! I’ll look into it!

[@roni2671]

Life hack get adjustable wrench tape ziptie to wrench(moving part) now you can mesur inside of "pipe" or what ever it is remember to look "size" from ziptie

[@BurkeMakesStuff]

👍🏻👍🏻 very nice!