Great video, had to speed it up to 1.5x but no big deal. Solid info.
@DrivenbyGears3 жыл бұрын
No problem
@stubbsshop3 жыл бұрын
Informative video for sure. What you did forget though was the motor mount info, I removed my V6 adapters and tried bolting on new 350 mounts and not all the bolts lined up so I'm working on figuring that out now.
@DrivenbyGears3 жыл бұрын
I had no issues with mine but they were a pain to install
@stubbsshop3 жыл бұрын
I ended up bolting the V8 mount in and the top two holes lined up but the bottom middle one was off by a tiny bit, ended up using a step bit on both sides and made it work. Now time to drop the engine in lol
@ESKO7603 жыл бұрын
Learned a lot thanks
@DrivenbyGears3 жыл бұрын
Yw
@stubbsshop3 жыл бұрын
In addition, of course I found out when the I got the bolts through the motor mount, the V8 bolts are like 1/2" longer and you do need it. I couldn't use the original bolts.
@4barperformance7785 жыл бұрын
Nice informative video!
@DrivenbyGears5 жыл бұрын
Thanks
@dkemp13372 жыл бұрын
Your not going to believe it I just did this exact swap two weeks ago
@snoofayy61502 жыл бұрын
how did it turn out man?
@EfurdGarage5 жыл бұрын
Pretty good
@jvarner28744 ай бұрын
Bought a '97 Astro AWD with a '95 Suburban 350 TBI v-8 installed. Poor acceleration, gauges don't work. Wiring harness from V-6 original to van. Friend says computer does not recognize the V-8. I see videos with conversions V-6 to Vortec 5.7 but not similar to my conversion. Do not know who did conversion - I do not think they finished. Would appreciate any ideas. Van is rust free from Oregon Thanks
@dkemp13372 жыл бұрын
That’s funny my 350 came out of an 89 and the egr wasn’t in the way but the distributor and coil pack were lol
@1994Nic19943 жыл бұрын
Correct me if i am wrong but 96 and up is vortec v8 not tbi. Vortec also went to 8 injectors rather 2 as the tbi setup has. Vortec also had the ecu in the engine bay. 88-94 is the same sqaure dash. 95 the dash changed and also still had tbi. And 95 could be that they put the ecu in the engine bay due to the interior change.
@DrivenbyGears3 жыл бұрын
Correct v8 96+ are vortec
@joango70843 жыл бұрын
What about from 1998 Chevy Silverado 4.3l v6 to a 1998 5.7l vortec engine
@DrivenbyGears3 жыл бұрын
It will still be the same concept the wiring might be a little different cause yours is spider injected.
@dkemp13372 жыл бұрын
Omg I should’ve listened to your video lmao you just said what I did what about the ecu
@dkemp13372 жыл бұрын
My v6 had two knock sensors so that’s more confusing because my motor only had one I extended the guage wire and other knock sensor
@ahghernandez25583 жыл бұрын
Do you have any info regarding this same swap, but with Manual Transmission? I was surprised it was not discussed
@DrivenbyGears3 жыл бұрын
That I don't beleive it or not cause I have not done the swap but as far as engine side it all be the same.
@konstanttution7319 Жыл бұрын
Not on 88-93 at least maybe 95
@dkemp13372 жыл бұрын
That’s funny my 250 came out of an 89 and the get wasn’t in the way
@MrGTAVForLife3 жыл бұрын
I just wonder if I can swap my v6 out for a v8 without much trouble. I got an 96 explorer and want the v8 5.0l from that gen.
@DrivenbyGears3 жыл бұрын
Have no idea about a Ford.
@jacobneumann67753 жыл бұрын
Very informational do u wer i can get a 5.7 ecm prom chip 95 chevy c1500 5spd im having no luck
I know they do im looking for a factory v8 chip with 5spd trans that’s difficult to find
@jacobneumann67753 жыл бұрын
Thank you
@dakotamaccarone3 жыл бұрын
Do have a link for the ecm connector from v6 to v8 ecm
@DrivenbyGears3 жыл бұрын
What you mean ? Its all one huge harness.
@DrivenbyGears5 жыл бұрын
Hopefully this Helps if you need to see the engine playlist install click this link--------->kzbin.info/aero/PLMk_yJGG8I6wPdBpL104_q6B1sQXNZfJN
@davidsnydersr1602 жыл бұрын
I have a '99 safari with a 4.3, pulling a 3700 lb trailer makes it sound like it's working a little too hard, I found a '93 chevy 1500 stepside for 300 bucks, 5-speed standard, would it actually be worth the hassle to go v-8 or do you think a 4-3 would pull it?
@davidsnydersr1602 жыл бұрын
I'm 66, and I've only ever owned 3 Chey's in my life, a '99 4x4 s-10 and a '66 Impala ragtop with a 283, 2 speed. the 4.3 in the s-10 seemed pretty ballsy and I ran it till the wheels fell off haulin' firewood. The Safari I've had for 2 years now with just now 173 K on it. Ha, I'll never buy another Found On Road Dead after watching your video. The older Ford's always seemed to be nothing, nothing interchanges after a few years. I was told you have to use the 5.7 standard flywheels on the 4.3 swap? Help an Old Seabee out here? Thanks.
@dkemp13372 жыл бұрын
What if I used the v6 harness on the v8
@ManuelPerez-gz3ky3 жыл бұрын
I wish every individual that makes a video does it with the recording item, iphone, video cam, etc. with the volume on HIGH. i can not even hear this gentleman talking. My comp. settings are on high for volume and also the speaker system attached to it. It's a shame
@DrivenbyGears3 жыл бұрын
Sorry brother
@dillionbrown27033 жыл бұрын
I’m confused about the torque converter why wont it work?
@snoofayy61502 жыл бұрын
it's too small and will fry, Yannick Doc on KZbin did a V8 swap on his 4.3 astrovan, he used the stock 4.3 torque converter and it burnt out the 4L60 in a few days!
@joelshort2782 жыл бұрын
do you know about a 1993 chevy c1500 2wd my truck has the ecm in the glove box but its the older style with a small chip looking prom chip i tried starting it with the v6 prom chip itll start run for a minute or so then stall do you know what prom chip id need the doner truck i had the computer was a newer one like the one in this video thanks joel
@chevyboyforlife42343 жыл бұрын
What about going from a 5.7 V8 to a43 V6 TBI that's actually what I'm doing now
@DrivenbyGears3 жыл бұрын
It be the same just reverse
@gerardodiaz5483 жыл бұрын
Will extending sensors matter if i swap the motor with the v8 harness ecm and fuse box?