5 THINGS TO LOOK FOR | Lexus GX470 BUYERS GUIDE

[@gennaro4941]

You can get these for 5k to 6k.. but they all have over 200k miles.. If you find one with good maintenance history with that miles.. it shouldn't be a problem. The engines if they are taken care of.. they will last over 300k 400k easily!! And if you beat the shit out of your truck and go off roading.. don't blame your ball joints!! Even new ones are not made to abuse them!!

[@richardwilliams9815]

Doing head gaskets is a lot of work but really isn't hard. Imo the biggest struggle will be getting the exhaust manifolds off. One broken stud will ad hours to the job. But intake manifold t-belt off and exhaust manifolds off. Basic job. The longer you drive it with combustion going into you coolant the more likely you are to warp your cylinder heads. And Toyota's have zero room for machining. You timing will be off. Can't believe some shops want $6k. I own a 05 gx and I could do both heads with upgraded arp head studs (so it will never happen again) in about 2 days. Luckily we have cast iron blocks that can take the heat. But chances are you'll need new cylinder head's.

[@richardwilliams9815]

I see you're in Utah. I've been a mechanic for 23 years. Need any help or advice let me know.

[@roccol5360]

This may be the first GX470 video I have seen where the owner had all these issues, mines rock solid, 124k, did the timing belt, water pump and radiator (not because anything was leaking) but just as preventive maintenance. Doesn’t sound like that rig was taken care of, sorry your experience was bad.

[@robcommorat2084]

Excellent content, bought mine (Gx470) 107k for $16 k , literally did exactly what he suggested ( all tips came from GXOR, etc , etc, there are several very good sites)

[@josephross5948]

Don’t forget to look at the brake and gas pedal! Lots of wear on them means lots of stop and go city driving. It’s harder on vehicles than highway driving. And purchasing unmodified vehicles (more likely that the vehicle has never left the pavement) and plan on doing the modding yourself, unless you trust the mods/work on the rig.

[@jodensmith5093]

If buying one of these don’t get one until you are in the 16,000 to 20,000 dollar rage, with less than 150,000 miles on it. If you do that and look for rust and normal leaks you won’t have this issue in general. You can get unlucky of course, but ide be willing to bet this guy got a cheaper one. That’s fine but this is what can happen. If you follow the rules above than you will get one that most likely only has at most two owners and has been dealer maintained and as such won’t have this problem. Overheating pretty much only happens when you let it overheat in the first place because the coolant system wasn’t looked after properly.

[@josephstewart5952]

I have one with 270k on it and not a problem ever. It's all about how well maintained they were.

[@alchemist689]

Recently had to replace an emissions air pump and valves. Also the air suspension was failing and the dealer recommended an air suspension delete kit which involved replacing shocks and air bags with a spring suspension front and rear, Delete change out about $3,000. 2005 GX 470 106,000 mi.

[@kurt_yates]

That sucks. So to hear that!

[@flipperbooch2194]

I had a thing where not moving and having the heat on would drop the engine temp. Then again it was below zero freezing. Maybe that had something to do with it

[@iheartgs400]

Don’t pay over 15K for these trucks. Other than that timing belt, valve cover and frame, center diff, cv boots.

[@Being_Joe]

These rouns like the issues to look for when shopping for a Sequoia and other Toyota / Lexus products. I am on the hunt for a Sequoia/LC100/LX470 and I know the excitement but I have walked away as sometimes something just does not smell right.

[@kurt_yates]

Yeah, if you find the right vehicle it’s great. I hope you find a good one in your search.

[@jackwright3098]

How do you know how much rust is too much? Obv a hole you can put your fist thru but what about small holes?

[@waynespringer501]

Radiators don't have anything to do with head gaskets failing

[@joshuahenry9135]

This was some good advice. What was that Lexus site you referred to [6:09] that we can put in vin# to get repair info? Thx.

[@kurt_yates]

Lexus.com

[@michaelgriffin4386]

Sometimes listening to your Dad can save you a lot of money... Sounds like he warned you about overheating. 🧐

[@kurt_yates]

Yep. It definitely would have saved me a good amount of money.

[@gamerguy2159]

In your opinion what is a average price and a steal price on these let's assume 150k miles? Im looking at some now and I can't tell if im getting hosed.

[@kurt_yates]

What year, color, modifications, etc?

[@johnnylong6289]

This is like "regular guy who doesn't know anything about cars car reviews." I don't mean that in a bad way. Each vehicle comes with a learning curve usually learned through bad experiences trying to fix problems. I've been there on a few different vehicles.

[@mybears1837]

The gx have timing chain not belt.

[@kurt_yates]

GX470’s have a belt. The 460 has a chain.

[@jameskocks4734]

very similar to a 4th gen 4runner with the V8. i currently own a 2005 V8 in 2wd unfortunately. im in the hunt for a 2005-2009 GX. are you sure it isn't the water pump. when was the timing belt done?

[@kurt_yates]

They were done right before I purchased the car.

[@sebastianromero420]

I bet this was owned by a central/south american before you. They never maintain these toyota trucks. Frequently, they add water down south and they never replace the water pump. One day it overheats and then boom head gasket gets compromised. If they use water, then they don't get misfires. Did you ever run a scanner on it for a misfire?

[@kurt_yates]

This car was based out of Arizona originally. Supposedly the guy I bought it from had the timing belt and water pump replaced right before he listed it for sale. I do need to get it scanned. I currently have the typical dash lights on that most guys get with these vehicles.

[@sebastianromero420]

@@kurt_yates if there is no receipt then it wasn’t done (people actually write with chalk in the bay when it was done which cracks me up and others do the same with a sticker).

[@jackwright3098]

How do you know how much rust is too much? Obv a hole you can put your fist thru but what about small holes?

[@kurt_yates]

@@jackwright3098 it really depends on the overall appearance. You have to think about safety, as well as what it may take to work on the car. If everything is rusted out then working on it is going to be a pain.