5 Tips How To Fix Blurry PSVR 2 !

[@anarfox]

If you double press the PS-button you get instant access to the PSVR card which have a shortcut to "adjust visibility".

[@aznpanda510x]

This the one I used the most and want other to do also. It only take 15-20second to check. I will also say if you switch to contacts leans to glasses to redo eye tracking, since your eyes not as close to the lens anymore. The dead spot is a lot bigger for eye tracking. Because now your eyes farther away from the lens.

[@ExtraAtEase]

The advice to play another game to improve clarity is brilliant. I think many people assume that all games look equally sharp.

[@uppercutgrandma4425]

Yeah, it's a bummer some developers just can't be bothered to optimize beyond porting controls from industry standard (quest 2 due to vr owner/population)

[@CheckmateStallioN]

I found Rez Infinite and Moss 1 & 2 to look the sharpest. Brilliant games

[@maxmaxneolit]

Good advices for newcomers, but the real value of this video is the absolutely on spot sponsorship which has everything to do with the video at hand. So many eyeglass wearers can benefit from lens inserts. I am going to share the link with all my friends who use this or that VR, because guess why, they all wear glasses! Good partnership! Bravo!

[@mixedrealityTV]

Thanks! Yes, it absolutely fits! And everyone should get them, agreed!

[@importon]

"adjust visibility" should be done multiple times per session. I suspect a lot of people are reacting to re-projection though. This is the major source of eyestrain for me.

[@Rebel_at_Heart]

I hope that Sony can mąkę reprojection to work better... If only mediatek chipset inside psvr2 has enough processing power to do so (i hope it has :)

[@paddy1382]

​@@jeffreybankers3988no it is not. Lies 😑

[@Q-Limited]

Also , haven't seen this mentioned so much, it's important to calibrate the "eye tracking " before you "adjust visibility" And as for reprojection/ghosting, that differs per game basis and I found can be managed well, a faster turn speed helps me in free move games like star wars. Gt7 just have to live with it atm if you look at a Fast Moving car side on. No issue in some other games I tried.

[@ExtraAtEase]

Excellent point. First time I hear this but it makes perfect sense. If eyetracking isn’t calibrated, your IPD setting will be off.

[@maxmaxneolit]

Whas ghosting an issue with PSVR? I don't remember noticing it in GT Sport...

[@Q-Limited]

@@maxmaxneolit I don't recall, but only 1 car to look at in sport. Hope gt7 can be optimised further... but make no mistake, I love it as is 😍

[@donnajones1075]

I've got mine really sharp. Prefer it to the index and G2 personally. Resident evil 8, GT7 and Horizon are fantastic.

[@alanriordan]

How would your thru the lens image quality compare to the social screen output image? My experience is a huge difference between the two.

[@irishjay9485]

@@alanriordan leagues away from each other. We won't get the same quality as the social screen for years to come. We will need 16k per eye apparently

[@TomiTom1234]

Finally someone owns Index to tell me how it compares to PSVR2.. So you say it is even sharper than Index?

[@VilleVaananen]

​​@@TomiTom1234 I would say they are quite close. PSVR2 probably a bit sharper on non-demanding games. With Call of the Mountain.. maybe about the same as Index.

[@ChristopheVerdonck]

@@irishjay9485 *Totally not.* 16k would be 15360*15360 per eye and the psvr2 has a fov of 110°. The max ppd (pixels per degree) any human can see is 60 ppd. So at an fov of 110*60 the display would max out at 6600*6600. And most people can't even see up to 60 ppd Something with 160° fov and a resolution of 9600*9600 (10K) would be ideaal...

[@RoarMcRipHelmet]

According to SadlyItsBradley, turning down the brightness not only reduces mura - it also reduces motion blur due to the relatively high persistence of the OLED displays at high brightness. More research needed, he says.

[@donnajones1075]

I turned the brightness down a bit. The screen was a bit too bright for my taste.

[@markcarter2951]

Did he not say turn it down to 25%. Did Sony not test this thing?

[@ms3862]

@@markcarter2951 if you turn brightness down to 0% it's gets rid of all Mura and motion blur 100% the image looks super stable and sharp

[@markcarter2951]

@@ms3862 It makes it look better (far from perfect) but why would anyone buy an HDR product and turn the brightness down to zero. Pretty much sums up how bad this headset is that people are resorting to such lengths.

[@Rebel_at_Heart]

​@@ms3862unfortunately brightness turned to 0 in some games e.g. RE8 Village in dark scenes increase mura significantly

[@fabriciofontes2898]

Could you get another headset to compare the mura? Maybe from someone that is complaining about it, to see if there is a difference.

[@wes788411]

I’m going fi definitely order these. I didn’t know you would have to wear glasses with VR (I just bought PSVR2 and it’s the first time I played VR since the early 90’s), when I put the headset on everything was blurry and I realized I needed glasses. My glasses are a pain with it and I figured I would just have to deal with it. After playing with it for an hour or so, I quit and clicked on this video. I figured lens inserts would be a couple hundred dollars as it’s pretty niche, but $45 is not bad at all.

[@OdyBeRidin]

Vetrean VR enthusiast here... So my biggest issue is motion blur. When I move my VR body in the game Horizon, the background blurs as it moves, but if I just move my head, the background is nice and fluid, no blur. Some have said this is the motion reprojection. I was just wondering if theres as issue with my PS 5 or PSVR2. The blur Im experiencing is exactly what I see in my PCVR headsets when the frame rates are low. Anyhow hope Sony can get a handle on this with FW updates.

[@irishjay9485]

Yeah thats reprojection from 60fps to 120fps. Its annoying. Wish they gave us an option to run 60fps/90fps native with less quality graphics

[@OdyBeRidin]

@@irishjay9485 Well that would make sense. I was thinking the headset was defaulted to 60hz, I only say this because there is a procedure to enable the 120 hz setting for the headset, it will however disable 120hz to your monitor. I still have the "motion blur" before and after changing this setting. Maybe enabling this setting is for future native 120hz games?? Its kind of involved but this video makes it easy. kzbin.info/www/bejne/hau8c4WlrauMmrM

[@irishjay9485]

@PlanetVR the 120hz setting is only for the cinema screen mode, when watching videos. It doesn't effect vr games

[@OdyBeRidin]

@@irishjay9485 Oh ok, thanks for the info!

[@SteveHarmonsPage]

The quick fix for this is use snap turns instead of full stick motion. Now the game is tolerable to me.

[@Alan-lp5yu]

Been waiting for lens inserts. Most are still in preorder phase. Just ordered the VR-Rock lenses using your code. Thanks!!

[@MrJonnyHovo]

The Mura really isn’t an issue for me, as long as it’s consistent across the board. If the panel had some spots that were worse than others, than it would be a deal breaker, but that’s simply not the case.

[@mixedrealityTV]

Absolutely agree!

[@ms3862]

Lower the brightness of the headset it will 100% remove Mura

[@Rebel_at_Heart]

​@@ms3862actually it depends. In bright games like Horizon, Yes, it get rid of mura. In dark games like RE8 in significantly increase mura in dark scenes.

[@alanriordan]

I ordered those prescription lens, thanks for the discount code. Looking forward to trying them out.

[@mixedrealityTV]

Great! I am sure it will be fantastic!

[@jonm2522]

Hi I appriciate your video, however even with my eye in the sweet spot, the images isn't as good or as clear as if you were playing on a HD or 4K HDR TV, even it says it is on the box, that's not the case. Any other solutions to get the headset VR2 look crispier and sharper. Thanks

[@kevinidotta1593]

Did you fix it? I have the same problem

[@GM-cm3qc]

You try these vr lenses that is your sponsor?

[@inceptional]

In terms of both the mura and sweet spot on PSVR 2, how do they compare to the likes of PSVR, Rift CV1 and even the Quest 2? Also, one more tip to help with the blurriness and such: Clean the lenses regularly with a nice microfiber cloth. I'd say pretty much every time you put the headset on fresh again at the start of the your play session, and also when you give it to someone new to try out too.

[@shenmeowzo]

I read that if you leave an OLED headset playing a very bright colourful moving video for several hours it can reduce the mura, have u heard this? Not sure how it would work but worth trying maybe. Lol

[@Desperado169]

I‘m totally confused about the terms SPH, CYL and Axis. Only have BC, DIA and PWR on my german contact lense boxes 🙈😉.

[@lickrish3930]

How's the performance in the reprojection in this headset?

[@betonman9]

played re8, horizon, pavlov.......its great overal, reprojection is not like in other headsets,

[@importon]

Reprojection is a necessary evil to run these demanding graphics and it causes very noticeable blurring and double vision. Games that don’t use reprojection provide a lot more comfort and immersion

[@Kiwiintransit]

The re-projection does cause noticeable ghosting in games that use it.

[@GDBAKED81]

Nobody says why not use alcohol I have an electronics cleaning kit that come with wipes for LCD screens and glasses that's coated with a alcohol base. What will the alcohol do to the lens?

[@Joeybatz33]

Do you think a Firmware update or software update could help the blur or reprojection on Call Of The Mountain? It's a subtle skip/blur when I move while climbing on the ledge you can see..

[@PhotoJohn80]

Yes I agree with you. I find it crazy how so many people can’t even see this and blame me for being dumb on how I set it up. Mine also has very bad mura. I can’t stand fanboys blaming me instead of being subjective to the hardware. I’ve owned several vr headsets so I know how to work them. My quest 2 has no mura at all.

[@Joeybatz33]

@@PhotoJohn80 it's not mura that bothers me at all. The image is sharp, it's just Call Of The Mountain I get a motion blur jutter when trying to climb on the white painted ledge to climb, and some objects when moving.

[@Joeybatz33]

That's not what I said at all lol

[@PhotoJohn80]

@@Joeybatz33 well the mura bothers me and the mura is what makes things look blurry to me

[@cherryfruit5492]

​@@PhotoJohn80 Before psvr 2 I only used lcd VR displays. So I'd never seen Mura. The Mura on psvr 2 was a shock tbh, and bothered me for a while. I did get used to it however, and learned to look past it. But I understand if this isn't possible for some people, or if it's a deal breaker. It was definitely a surprise.

[@jamiesalmonsculpture8599]

Good advice for all the VR newcomers. The console KZbinrs reviews are soooooo bad on the whole. Totally haven't a clue about VR of course, but also will give a lot of newcomers completely wrong impressions and insanely over hyping the PSVR2 capabilities. I hope they find your channel

[@emyhR]

What about the main menu? Should text be super clear there? Cuz mine have a blur to them. Kayak game the kayak and water look amazing but when I look at a mountain or trees they’re blurry and kind of ruin the game cuz I wanna sight see

[@forbidden76]

Lenses these days have a HD effect on them. They make everything better looking. I order lenses just for this effect for all my VR headsets and it protects your eyes from being so close to those bright displays!

[@rayh9897]

COTM is not very "optimised" ... What should I do? 😃

[@mixedrealityTV]

Just enjoy the game! :)

[@PhantomRavn]

And most importantly never clean the lenses with liquid if you do you will create a permanent smearing rainbow effect i made this mistake with the PSVR1. Only use a dry soft microfiber cloth

[@Eskoxo]

might be issue with psvr1... i have 4 headsets occasionally use with some liquid to clean em and their fine.

[@PhantomRavn]

@@Eskoxo you might be okay using just water with a clean cloth but definitely don't use any solvents

[@Eskoxo]

@@PhantomRavn of course only water just like any screen even on tv you dont want to mess with the coatings they have on there

[@PhantomRavn]

@@Eskoxo We'll some people don't know this I'm not hearing many if any reviewers talking about this, I'm just trying to prevent someone else from making the same mistake i did with the PSVR1

[@dustinpine3705]

The cactus cowboy game looked flawless but when i played village i noticed minor mura and in horizon i get motion blur.

[@thelitch6784]

Graphics on the psvr2 are absolutely amazing but I have noticed that trying to focus on a npcin the distance is super blurry and the clarity goes down with distance. That's the only drawback in my opinion

[@mixedrealityTV]

Yeah, but overall the system is just fun!

[@paddy1382]

It's horrible how blurry objects are in the distance, and the sweet spot is tiny... I'm thinking of selling my psvr2...

[@LarsAgerbk]

What is anti blue-light lenses?

[@SpacehotelMusic]

@0:06 We're on PSVR5 already? Awesome!

[@looeegee]

Probably not until we have the PS9

[@SpacehotelMusic]

He said PSVR5 accidentally. 😎

[@shenmeowzo]

I wish I had a PSVR5 ;)

[@anguinan]

i can't get all sharp. The sweet spot is only there if I move my head together with my eyes. Looking right or left or up or down I'm always seeing blurry. That's a shame 😢. In both, horizon and GT7

[@christianalmaraz5925]

Si moves solo los ojos se ve borroso a los costados?

[@anguinan]

@@christianalmaraz5925 claro, solo veo bien al medio. Entonces para ver al costado tengo que girar la cabeza, y mantener los ojos al medio

[@stevebobowski3507]

@mixedrealitytv apart from reviewing headsets, what headset do you spend most of your time in when you are personally gaming? And why?

[@mixedrealityTV]

Psvr2. It's just lots of fun!

[@stevebobowski3507]

@@mixedrealityTV I currently have a varjo areo/13900/4090/motion sim rig/bhaptics gear, would you recommend trading in my gear for a psvr2?

[@mixedrealityTV]

@@stevebobowski3507 well, I can't say so generally. If you use your pc for msfs fit example then no. Because you can't get it on PSVR2. Also it is not as high resolution. But I certainly have so much fun with the PSVR2!

[@stevebobowski3507]

@@mixedrealityTV thanks.....to be honest, the most fun I ever had in VR is playing mario kart vr with full motion rig/fanatec steering wheel, shifter, gear box and pedals/buttkicker with srs wind sim. Funny thing is the game wasn't even designed for vr in the 1st place , lol. I comming to realize that some of the best experiences are like this in result from flat to vr mods for example, doom 3 , gunfire, horizon, grounded, cyberpunk, re 2/3/7/8, alien isolation, metroid prime, ghostwire, left for dead 2. ...the list goes on. Sony has something special as they can control the quality of content to a certain degree and its plug and play but the future of vr is the flat to vr injector as then all flat AAA titles will be easily and effectively ported into vr......something only for pcvr.

[@rushmore3927]

You can't fix it, but can mitigate it. There will always be some level of blur, due to the film applied on the lens modules to mask the SDE from the OLED pixel diodes. The same res OLED display has a lot more screen door than the same res LCD display. Technical fact, until a panel array design gets away from pentile for OLED.

[@MrMightyZ]

Great thanks. I would add 1 small tip for 1 specific type of player; If you wear glasses but are shortsighted like me, you might not need to wear them for VR because the screen is so close.

[@b0ris360]

Do you need a 4K TV to use the PSVR2? I can’t select HDR for the PSVR2 because it says “Your TV is not compatible”. It’s only 1080p. Could this be one of the reasons that mine looks very blurry?

[@Trinketorium]

Turn the tv off and try it

[@mgsv5297]

Great info my friend! Thank you.

[@Rostovgenchik]

Sebastian, hello. I read in one forum that Sony allegedly reduced the Fov after a firmware update on Psvr2. I think this is an important topic and would like you to cover it and check it with a console that has not been updated since February.

[@mixedrealityTV]

Why would they want to decrease FOV? That does not make sense! :)

[@Rostovgenchik]

@@mixedrealityTV First of all, thank you very much for answering. People write that the fov in Horizon allegedly decreased, supposedly Sony could listen to user complaints, which makes some people sick. Again, I'm reading this now and decided to ask you like a pro. Have you found similar threads or posts in general?

[@Rostovgenchik]

@@mixedrealityTV Sebastian, can I ask you a question? I will soon have to personally familiarize myself with Psvr2, and before that I had never had a personal helmet. Only played 15 minutes on Ps4 Pro in the first PsVr. I was then impressed. I also have a thought about Pico 4, but for some reason I have such an opinion that after Psvr2, Pico 4 may not seem like a good choice to me. I know that the helmet is praised considering its price, but still, what do you think, if I decide to buy a Pico 4, will I not have a bad experience after using Psvr2? Thank you in advance for your reply.

[@Rostovgenchik]

​@@mixedrealityTV For example, today's comment of one user on the forum: I also caught this "bug". Cured by expanding the interpupillary distance and lenses for a helmet. Those who have vision less than 1 try to improve their vision with Fresnel lenses. Narrowing the interpupillary distance on the helmet improves vision and picture, but spoils the FOV

[@Rostovgenchik]

​@@mixedrealityTV Sebastian, have you tried looking into Psvr2 without a face mask? I know, there are people who do this in the same Pico 4, refine the nuances a little and say that Fov is so chic that after what you see, you don’t want to play with a face mask)

[@华尔兹-k1j]

if PS5 is added with the option that can adjust sharpening like NVIDIA，PSVR2 will be better

[@jjeeqq]

Supersampling

[@华尔兹-k1j]

​@@jjeeqqI think the anti aliasing level should be adjusted in the game to make up for the blurring of the game image, and the image sharpening function similar to that in NVIDIA video options should be enabled in theater mode

[@jjeeqq]

@@华尔兹-k1j if foveated rendering doesn't help then nothing

[@mariodiaz2911]

Ok, what if i spent almost 600 dollars and cant fucking afford the inserts. Have any advice for that?

[@mariodiaz2911]

Also i might add. I have a high prescription... so the fucking inserts would cost 100 dollars that i dont have. Any unbiased opinions from an unsponsored point of view?

[@James-fv1cm]

Just picked up my PSVR2 and I am thoroughly disappointed. Just purchased the walking dead chapter 1 and 2 bundle only to have to turn everything off after 20 minutes. I cannot get over that grainy mura filter. It completely takes me out of the immersion because all I can see is this grainy pixelated filter. So sad because I had such high hopes for this headset after all the videos I’ve been watching on it. Massively disappointed

[@andrewthomson5266]

I don't have one but the advice is good. Some suggestions are general and helpful to me.

[@ijclnl48]

How the heck did this dude get a PS VR5???

[@rickaron7593]

No man's sky is one of those gsmes not optimized for the headset.

[@Awan2047]

I have a lot of color fringing around white texts is that normal?

[@mixedrealityTV]

Yes. Chromatic aberration.

[@Awan2047]

@@mixedrealityTV can i do anything about it?

[@McKuc]

I am enjoying it too.

[@atrain132]

Doesn't matter what I do, the right lens is always blurry for me. I can adjust it, but when I tighten up the whole headset, the left side is normal, and right-side always ends up blurry.

[@grahamkelly8662]

I have same but with left lens.

[@christianalmaraz5925]

Se soluciono?

[@atrain132]

@@christianalmaraz5925 como?

[@J47xLiVe]

Great! Thank you!

[@Trinketorium]

None of these “tips” (which are all noted on the website btw) fixed the blur caused by the Mura. It’s misleading to imply the headset looks like the tv does - it’s still blurry and hard to see especially in dark areas.

[@TomiTom1234]

I have been waiting for this video, thank you!

[@mixedrealityTV]

You are welcome, hope it helps!

[@jjeeqq]

Funny how 80% people complained about blurriness but didn't know how to use headset.

[@laartwork]

It is mostly the rear projection motion blur and ghosting that is bad in games like Horizon and RE: Village. Not adjusting the IPD or wearing glasses.

[@ms3862]

Sony doesn't mention that lowering brightness massively reduces motion blur

[@hamzadesidragonsarwar]

That’s and when people sweat that will make it blurry they do have add ons which prevent that

[@PSVRBRASIL]

Dropping a like. The best "fix the blurry" video I've seen here.

[@mixedrealityTV]

Thanks!

[@paulangelo8833]

Tank you

[@mixedrealityTV]

You are welcome!

[@drsiiiiin]

Mine is blurry

[@chamamemestre]

Wow, this guy has a PSVR5?! Must be 16K per eye lol 00:05 I have seen so many of these tips videos for PSVR2. They don't work. The thing is flawed, but still much better than the competition. That is all.

[@unclejezza]

Moire is pronounced ‘Mwah-ray’ not ‘Moo-rah’

[@mixedrealityTV]

But it's not Moire, it's Mura (Japanese).

[@DerBums80]

Nothing helps but 4hx.

[@markcarter2951]

Over sold big time by the you tubers. Sent mine back, would have been OK 3 years ago but awful mura, low res and fresnel doesn't cut it in 2023.

[@MsUltraBob]

Sounds like you didn’t wear yours correctly. Picture looks great for a vr headset but you have to find the sweet spot.

[@MKwadratPodcast]

@@MsUltraBob "You're holding it wrong"

[@markcarter2951]

@@MsUltraBob I am not an idiot, i know how to wear VR headsets and find the sweet spot. However that doesn't help with the mura and reprojection does it?

[@InspectorGamecat]

It's the reprojection that's the worst for me, Song in the Smoke actually looks really nice. Was looking forward to the OLED as well, perhaps remembering my Quest1 as a PCVR headset with tinted glasses

[@Eskoxo]

ill agree mura and blurriness are an issue but its not low res and fresnel is still a fairly standard lens for vr not everything will be newest and greatest it all costs $$

[@tasmania9576]

Don't drink so much!

[@natanaelberntsson7487]

First view, first like! Class content!

[@hardkore360]

i have the best tip! Just dont buy it.🤣🤣🤣🤣

[@boblatouche2273]

6th tip= return to the store

[@Phoenix4montana]

Fix the blur by returning like I did because this headset was so hyped up and it's complete garbage

[@importon]

What other headsets are better?

[@betonman9]

find better headset for this money loser...quest2 and pico 4 are crap compared to this (for pcvr)

[@ms3862]

@@importon nothing, vr tech hasn't fundamentally improved much

[@importon]

@@ms3862 you're not paying attention then. You must want the device that won't exist for 10 years.

[@marksimpson1007]

Doesn't work.get over it