Going over all the mods done to my 2004 Mustang Mach 1 making 500 HP. Follow my TikTok! @mach1cody
Пікірлер: 83
@mrjesuschrist2u2 жыл бұрын
Glad to see youre back/still at it kinda lost track of ya after the rear end blew.
@nickh3164 ай бұрын
Pretty cool to see another procharged Mach in my area 🤙🏼
@mikehawk120 Жыл бұрын
For the new edge, we all mostly went with the tri ax shifter back in the day. MGW is good too
@marlostanfield10872 жыл бұрын
Sick Machy!!!! Bro you need a shorty antenna tho! Lol
@jameses69692 жыл бұрын
Very clean Stang 50 build u have...Im still upgrading my Stang Gt build as i go 🏁🏁
@jameses69692 жыл бұрын
Nice Procharger & blow off valve & them nice Tach gauges & interior & exterior ...Thats for sure some plans upgrade im planning for my stang 🏁
@tomkjr12 жыл бұрын
Nice Mach 1...needs headers! I own an 03 Cobra (whipple 2.3 equipped). My second choice would be the Mach 1 (03-04). I love the shaker setup!
@CodyDriven2 жыл бұрын
It’ll be getting headers when i start my motor build soon! Thanks man!
@cvestrand22592 жыл бұрын
I’ve got both a termi swapped mach 1 with the shaker hood still, love it
@chriscalhoun2832 жыл бұрын
What part of Talladega you from ?
@Fiterpilot2 жыл бұрын
I want one of these cars so bad, but I haven't been able to find any reasonably close!
@rygi232 жыл бұрын
All that extra air/fuel with stock manifolds. Damn. You are going to get a huge boost in power if you ever get longtubes and a re-tune. Nice Mach well done👍
@wallyc73492 жыл бұрын
No he wont
@midnight3472 жыл бұрын
@@wallyc7349 why do people think there is like 100 horse to be gained with headers even on a boosted car? It helps but it ain't mandatory at all.
@wallyc73492 жыл бұрын
@@midnight347 because they think if a car gains 15rwhp NA from longtubes and retune then it must gain double that with boost. Most cars that already have boost, then install longtubes and get retuned, gain
@chrism.7282 жыл бұрын
He'll definitely pick up power across the powerband, especially up top with LTHs and a great tune. Not saying he'll gain 30 rwhp, but the gains will be noticeable at the strip.
@wallyc73492 жыл бұрын
@@chrism.728 Definitely not up top. Looking at around 10rwhp peak. Across the powerband he'll pick up some. $100 pulley swap is cheaper and easier to pick up 15-30rwhp vs $1000- $1500 longtubes/midpipe plus labor if needed.
@sailingzigzags65112 жыл бұрын
Appreciate that, I was wondering if the motor had stock internals. I’d like to do the pro charger on mine as well
@CodyDriven2 жыл бұрын
You’ll love it if you get one, try to get D1sc, only a few bucks more and more room to grow if you want big power in the future
@sailingzigzags65112 жыл бұрын
@@CodyDriven man appreciate that and the reply..✊🏼
@wallyc73492 жыл бұрын
Stock internals are fine with a good tune keeping it under 12psi. I've been running 12psi on a stock longblock for 5 years on 93 and e85. Make sure you use a good tuner.
@kevinj26682 жыл бұрын
Do you live in Alabama? I am south of Birmingham. Have a 04 mach and would love to get some tips on upgrading mine. Much appreciated man!👊
@codyedwards12112 жыл бұрын
Is this 500 wheel power?
@c.g.vproduction94102 жыл бұрын
Did u had to splice the wires for the MAF adapter? All 6 colored wires gotta connect?
@CodyDriven2 жыл бұрын
No splicing for the maf connector! It was completely plug and play, thats why i chose that one!
@c.g.vproduction94102 жыл бұрын
@@CodyDriven u got it from lethal performance?
@CodyDriven2 жыл бұрын
@@c.g.vproduction9410 yes!
@chrism39332 жыл бұрын
Why is it annoying to drive on 31 spline axles?
@Nfordd2 жыл бұрын
Hey man nice car she sounds amazing. I am 20 years and I am also a full time college student I have the option of buying a 2004 Mach 1 for 16k and only 84k miles. Should I get it and is it something I can daily drive?
@midnight3472 жыл бұрын
Of course you can daily it man it isn't a 69 mach it's an 03-04 lol. These cars aren't THAT old. I used to have a fbo Mach in 2012 I dailied it no problem. They're awesome cars. Seems like an OK deal in this market if it's in solid shape.
@leecisneros1092 жыл бұрын
Question.. did you forged your internals before reaching 500?...
@CodyDriven2 жыл бұрын
Nope, the torque is low enough that it should last quite a while at this level
@leecisneros1092 жыл бұрын
Thanks, I'm debating where to put an eaton swap or Procharge on my mach.. someone told me I had to forged if I go with the eaton.
@CodyDriven2 жыл бұрын
@@leecisneros109 keep it under 450 torque and you should be good with either one, good tune is a must
@leecisneros1092 жыл бұрын
Thanks!! Cody! 😎
@camdevan69122 жыл бұрын
Love the license plate 🤣
@kparrish4917 Жыл бұрын
Stock throttle body?
@CodyDriven Жыл бұрын
Yes
@jacobgomez26822 жыл бұрын
Man how do you have stock manifolds and exhaust with that work on it, that's crazy to me as a master mechanic, let her breathe, stage 2 clutch and aluminum driveshaft nice car man
@wallyc73492 жыл бұрын
Lol doesn't need longtubes. There is very little gain from them on a stock motor low hp boosted car. I make over 500rwhp through an auto on a stock longblock with stock manifolds.
@jacobgomez26822 жыл бұрын
@@wallyc7349 19 hp on mine and magnaflow x pipes
@wallyc73492 жыл бұрын
Every car is different. NA falls in the 15-20rwhp range. NA cars gain more from longtubes than boosted cars. My GT when it was NA gained 17rwhp 13rwtq from longtubes and retune. Tiny change for the cost of longtubes, labor, tune. With the Mach skipped all that little power stuff.
@jacobgomez26822 жыл бұрын
@@wallyc7349 to each it's own I have a bolt on mach but as a master tech install isnt bad plus an engine is like a vacuum more it can bring in and out the better, plus stock manifolds are horrible in comparison in my opinion, hardly flow, with nitrous I definetly feel the deference even without it,
@wallyc73492 жыл бұрын
@@jacobgomez2682 stock manifolds have been behind 800rwhp 4v's. They are not bad at all in a lower power stock motor less than 600rwhp setup. I had longtubes ( got a pair of brand new ARH's with midpipe free from a raffle I won) on my GT and then added the blower. With boost the car didn't make anymore power than cars with similar mods, psi, but with factory manifolds. Have seen multiple cars react the same way. Forced induction motor does not need the benefit of scavenging like an NA motor. Just saying that longtubes are absolutely not necessary to make good boosted power. Especially when you can find complete used boost kits around $3500 that'll put you right at 500rwhp.
@jdhamm1552 жыл бұрын
How is carbon fiber helping with 500 hp?
@southernslice9941 Жыл бұрын
Do you still have the Mach
@CodyDriven Жыл бұрын
I do not!
@benviator61952 жыл бұрын
How long you've been running it at 11lbs? Just curious, I've heard multiple say how they can't take much more than 8-10 for very long.
@CodyDriven2 жыл бұрын
Almost a year now! We’re gonna see how long it lasts!
@wallyc73492 жыл бұрын
I've been running 12psi for 5 years on the stock longblock. The tuner you choose is very important.
@benviator61952 жыл бұрын
@@wallyc7349 You did a dyno tune or went with someone like lund?
@wallyc73492 жыл бұрын
@@benviator6195 dyno tune plus street logging. I also always log at the track. Lund only tunes coyotes now.
@benviator61952 жыл бұрын
@@wallyc7349 you running a procharger as well?
@Orangemach2 жыл бұрын
11 lbs😵
@wallyc73492 жыл бұрын
Been on 12lbs for 5 years
@littlekid9019 Жыл бұрын
Crazy that the new Mach 1s are pulling 480hp with no super chargers…
@CodyDriven Жыл бұрын
Crazy what 20 years of technological advancement while do for hp
@littlekid9019 Жыл бұрын
@@CodyDriven umm sure.. you would think that would be the case for the 73’/74’ to 04’ which is 30 years of tech advancements but 74’ Mach 1 charger/modded out pulling 500 hp too 🤭
@CodyDriven Жыл бұрын
@@littlekid9019 tech advancement is not always linear
@littlekid9019 Жыл бұрын
@@CodyDriven Exactly, so back to my point crazy how the new Mach 1s are pulling 480 with no supercharger.
@midnight3473 ай бұрын
You're focusing on na or boosted but there's alot more to it. They have alot of tech, ton of rpm and compression of 12:1 vs the Mach that was 10:1 it has more displacement and more aggressive cams because of the vct and if basically comes with mid length headers factory. It's a much better setup you can see where the 150 hp came from. The Mach had about 330 hp in stock form at the flywheel. Not what it was rated but what it ACTUALLY had.
@alexispatrick43732 жыл бұрын
11 pounds on stock block? No problem?
@CodyDriven2 жыл бұрын
Yup no issues!
@boxcarent.31472 жыл бұрын
Engine bay is filthy, needs suspension work, lower the car please.
@jdhamm1552 жыл бұрын
500hp with a supercharger.... not anything special bud.
@traz2.0644 ай бұрын
not cool bro
@midnight3473 ай бұрын
500 at the tires...it's not anything special but it ain't bad for a 3300 lbs new edge mustang on a stock 20 year old 4.6 motor. I gaurantee its alot faster than you realize. It's not just about peak rwhp. Everyone always focuses on that but it's just one of many things that is important to the overall feel of something...