500hp build part 2

Thermostatic switch only thing required is what’s in the video. Extra wire is not needed.
$35
 www.ebay.com/itm/234419642507...
Torque solution radiator mounts
$37
 www.ebay.com/itm/283513608698...
SR 20 swapped 240 SX aluminum radiator
$98
 www.ebay.com/itm/233049462804...

[@aatoys001]

Youre the starion wizard. Every thing you work on works.

[@legionelitemotorsports2096]

Thank u thank u I try💪🏿🦾💪🏿🦾

[@TimeLapseCarGuyBruno]

just a tip.. its best now to take care of the diff cover gasket, oil n mounts while the tank is out. much easier access

[@legionelitemotorsports2096]

Great idea

[@eugenefernandez3351]

👍👍👍👍👍

[@caseycappoen251]

Id go with 2 smaller fans with more surface area and a fan specific to oil cooler. A shroud if you can do it. Used a big one long ago... Didn't work as well as i excepted for the specific reason above. Big one will draw alot of power and it's not utilizing the entire area it's a waste. Do 3 trust me. Tie into the OE relays they work fine also.

[@legionelitemotorsports2096]

Oh yes I completely agree. I’ve been testing a couple of different set ups and so far great results. I’ve done six hour round-trip’s great great results but yes, I completely agree.💪🏿🦾💪🏿🦾

[@williamkidney8441]

Can you link the fans you are using

[@legionelitemotorsports2096]

Of course I’ll do both www.ebay.com/itm/380287826296?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=FE_GRl6LQo-&sssrc=4429486&ssuid=XBZthaK5S1W&var=&widget_ver=artemis&media=COPY That’s for the two pulling fans next the pusher www.ebay.com/itm/293295720832?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=kF_hq9DOQe6&sssrc=4429486&ssuid=XBZthaK5S1W&var=&widget_ver=artemis&media=COPY