im loving the sound of this sohc turbo build, sucks that the head is lifting even with the arp. Im doing a mild vitara build and probably just looking to do 300hp and hope the head does not lift. Your build sounds solid, keep up the work brother
@FUBBA3 жыл бұрын
This car is so cool Aaron thank you for showing us the build
@blackreef99723 жыл бұрын
Good to see other people pushing the little d series. Currently building a awd d series with a borge warner 362sxe
@stevo_sir3 жыл бұрын
Congrats, now here’s your 🍪
@blackreef99723 жыл бұрын
@@stevo_sir thank you chieftain. Let me know when that vette Is ready to go to gapplebees
@Bassknots3 жыл бұрын
Nice ., I want to get started on my build .. car and build is clean sounds great. . Looking forward to seeing this sorted . Sucks about the studs and head lifting I was wondering about that as I was watching . I’m trying to avoid the issue if I get any where near as close
@TURBOTRISTO2 жыл бұрын
Inspirational bro good job
@boost_edjamesmathew21683 жыл бұрын
These are the head studs I run they been holding 30psi no problem they're 11mm×1.5 They work on D15B v-tec or D16Z6 heads you will need to time sert your block and drill the head
@ACGarage6143 жыл бұрын
I bought srt4 head studs already. Drilling and tapping the block as we speak.
@boost_edjamesmathew21683 жыл бұрын
@@ACGarage614 it's not hard just time consuming your going to have to grind down the washers cause they're too wide I just put them on a bolt and nut and grinded them all together it's way faster also you have to drill the stud holes on the head cause the 11mm head studs don't fit although they did barely fit through my head gasket anyways good luck that should solve your head gasket issues
@badluckclub66303 жыл бұрын
Yo man, you gotta live close by me, Im in the GC area outskirts of cbus. Little red boosted EF hatch running around with no front end on it. lol Would be cool to hang with another d series dude sometimes man!
@ACGarage6143 жыл бұрын
Yea. I’d say you’re within 20mins but no I haven’t seen your car around.
@badluckclub66303 жыл бұрын
@@ACGarage614 Followed you on IG.
@parisvernatter2 жыл бұрын
Your in grove city?
@shakeemnewman976511 ай бұрын
Man love your setup
@lordstorm85553 жыл бұрын
Hey were did you find a conversion kit for the coil packs instead of using distributer?
@Casey_and_Cars2 жыл бұрын
Burton-racing.com
@DevinScott-to8ee4 ай бұрын
Right
@jimhiscott2918 Жыл бұрын
If it lifted the head using ARP studs at only 479hp that's more coffee a build issue then a head stud problem.
@shakeemnewman976511 ай бұрын
That's the same thing I was thinking too
@FreezyFBaby4202 жыл бұрын
What exhaust manifold did you use to keep ac?
@Constantuned3 жыл бұрын
nice setup. Howd you mount the coil on plug? and what pump are you running?
@ACGarage6143 жыл бұрын
Burton racing coil plate. Y8 crank n pump
@Constantuned3 жыл бұрын
@@ACGarage614so cool been wanting to run that. I found your install video on the COP kit. Any reason you didnt run z6 crank?
@ACGarage6143 жыл бұрын
@@Constantuned just used what i had.
@jamzempire3 жыл бұрын
You can use a d17 valve cover and gasket….
@Constantuned3 жыл бұрын
@@jamzempire heard rumors of this. Do the studs line up?
@xlebxlebylllek7030Күн бұрын
How do you use the map?
@ej.tyloc2210 ай бұрын
Did Quentin happen to tune your car bro? I’m from Columbus 😂 Edit:watched full vid got my answer lol if you’re in the Columbus area still come out to cars and coffee season 15 finale Saturday
@rego000012 жыл бұрын
Hey, Ohio! Right on, up north or south?
@joseamaya33522 жыл бұрын
What’s your set up with the transmission is it still holding up?
@mariobarrantes41372 жыл бұрын
Turbo size ?? I being having issues with my set up
@periosavethesohc3 жыл бұрын
Turbo and ecu?
@SIRICKO3 жыл бұрын
I have A filter smaller then yo jegs and I have never had A problem on power.
@drseus8083 жыл бұрын
Sheeessshhh
@spdwebdotnet2 жыл бұрын
Nice build
@GA1.6T2 жыл бұрын
What compression are these pistons?
@tyferguson5643 ай бұрын
Did you ever get the head gasket fox and what head bolts did you go with?
@ACGarage6143 ай бұрын
No. I parted the car and went back to k series builds
@tyferguson5643 ай бұрын
@@ACGarage614 yikes, I was just motivated for the d series.. I guess it’s K series then
@joshualessard23253 жыл бұрын
What’s your compression on that setup
@DAV4WSR16 ай бұрын
Great! like that ! i do on my youtube chanel 295 HP and 377 tq with an D15Z6 at 18 psi ! CIVIC DAV4WS Slip-peut on dyno if you interesting . congratulation from France !
@TheDriftSG3 жыл бұрын
What timing where you running on peak boost?
@ACGarage6143 жыл бұрын
4
@manueld16singlecam833 жыл бұрын
How many foot pound you tight the d16 arp headstuds before lifting the head?
@rantstm88363 жыл бұрын
try 65ftlb that's what I have
@juangarnica18793 жыл бұрын
Did u sleeve the block at all? Or just stock block, currently building the same setup
@ACGarage6143 жыл бұрын
Stock cylinders
@Fackler912 ай бұрын
What exhaust is on this
@ACGarage6142 ай бұрын
@@Fackler91 apexi ws2 with a custom 3” cutout that open when ever in boost.
@BuyingTickets3 жыл бұрын
What clutch are you running? You recommend it?
@mihailpetrovici50443 жыл бұрын
He said act
@BuyingTickets3 жыл бұрын
@@mihailpetrovici5044 thx
@ProfessorPuffyPants3 жыл бұрын
Did you guys mention what fuel is in it?
@ACGarage6143 жыл бұрын
E85
@danielpersad57893 жыл бұрын
What turbo are you using here?
@ACGarage6143 жыл бұрын
Pte5831
@danielpersad57893 жыл бұрын
@@ACGarage614 ok thanks. Nice build man
@dylanmittal-lohse63873 жыл бұрын
Whats done to the crank to make that kind of power?
@ACGarage6143 жыл бұрын
Just off the counter vitara pistons Speed factory long rods King bearings Chamfered crank
@Constantuned3 жыл бұрын
@@ACGarage614 Z6 or Y Crank?
@Constantuned3 жыл бұрын
@@ignnext-gengameplay9274 true but the z6 crank fits into the y8 block. That's what I'm building right now.
@rantstm88363 жыл бұрын
@@Constantuned go with z6 crank if you can. I spun a bearing on an a6 crank
@abbas6742 жыл бұрын
@@rantstm8836 I have a a6 crank isn't it the same
@jayydaman6784 Жыл бұрын
What ur build setup
@bseries88262 жыл бұрын
Ooouuuu. Updates??
@ACGarage6142 жыл бұрын
Parting out
@bseries88262 жыл бұрын
@@ACGarage614 what's next?
@ACGarage6142 жыл бұрын
@@bseries8826 just bought a gsr and have a awd crv donor. But i want to k swap something. What would you k swap?
@bseries88262 жыл бұрын
@@ACGarage614 oouu. Nice. Man I would probably k swap awd a hatch(eg/ek). Any 90s Honda chassis is a good platform. Im almost done with my k swap (k24/20) eg hatch. Just need to do the radiator and put in oil, coolant, etc..
@ACGarage6142 жыл бұрын
@@bseries8826 well i have several chassis to work with. Ek sedan. Ek hatch. Eg hatch. Integra. You pick my next k swap. Probably wont be awd right off the back but it will be my next fwd drag car. Not a daily.